Título
Simulación de reacción de combustión (CH4/O2) en horno de crisol para fundición de metales no-ferrosos
Simulation of combustion reaction (CH4/O2) in crucible furnace for meltingnon-ferrous metals
Autor
EDILBERTO MURRIETA LUNA
BEATRIZ EUGENIA RUBIO CAMPOS
MARIO ALBERTO RODRIGUEZ ANGELES
DIANA GUADALUPE MOLINA BERMUDEZ
Nivel de Acceso
Acceso Abierto
Materias
CIENCIAS FÍSICO MATEMÁTICAS Y CIENCIAS DE LA TIERRA - (CTI) Horno de crisol - ([Acta Universitaria: Multidisciplinary Scientific Journal. Vol. 29 (2019)]) Estequiometría; - ([Acta Universitaria: Multidisciplinary Scientific Journal. Vol. 29 (2019)]) Combustión - ([Acta Universitaria: Multidisciplinary Scientific Journal. Vol. 29 (2019)]) CFD - ([Acta Universitaria: Multidisciplinary Scientific Journal. Vol. 29 (2019)]) Crucible furnace - ([Acta Universitaria: Multidisciplinary Scientific Journal. Vol. 29 (2019)]) Stoichiometry; - ([Acta Universitaria: Multidisciplinary Scientific Journal. Vol. 29 (2019)]) Combustion - ([Acta Universitaria: Multidisciplinary Scientific Journal. Vol. 29 (2019)]) CFD - ([Acta Universitaria: Multidisciplinary Scientific Journal. Vol. 29 (2019)])
Resumen o descripción
En la Universidad Politécnica de Juventino Rosas (UPJR), el Departamento de Ingeniería Metalúrgica está construyendo un horno de crisol para su uso en diversas investigaciones. Dada la diversidad de combustibles que pueden utilizarse, se están realizando pruebas para encontrar el más adecuado. El objetivo de este trabajo es analizar la combustión dentro de un horno de crisol que opere con gas natural, mediante dinámica computacional de fluidos (CFD, por sus siglas en inglés). El horno tiene forma cilíndrica, con el crisol ovalado y trunco en la parte superior, en cuya cámara de combustión los gases y el calor se dispersan isotrópicamente. La simulación se implementó en el softwareANSYS FLUENT V16. Se determinaron temperaturas medias de 1700 K, 1240 K y 800 K para casos analizados con diferentes proporciones molares. Los resultados obtenidos muestran un perfil de temperatura adecuado para los gases en la cámara de combustión, y no se observan problemas de flujo dentro del horno.
At the Polytechnic University of Juventino Rosas (UPJR), the Department of Metallurgical Engineering is building a crucible furnace to be used in investigations. Given the diversity of fuels that can be used, tests are being carried out to find the fuel with the best efficiency regarding temperature and emission of polluting gases. The objective of this work is to analyze the combustion inside a crucible furnace that operates with natural gas by computational fluid dynamics (CFD). The furnace has a cylindrical shape, with an oval and truncated crucible at the upper part, in whose combustion chamber gases and heat are dispersed isotropically. The simulation was implemented on the ANSYS FLUENT V16 software. Average temperatures of 1700 K, 1240 K and 800 K were determined for cases analyzed with different molar proportions. The results obtained show a suitable temperature profile for the gases in the combustion chamber, and no flow problems are observed inside the furnace
Editor
Universidad de Guanajuato
Fecha de publicación
25 de septiembre de 2019
Tipo de publicación
Artículo
Versión de la publicación
Versión publicada
Recurso de información
Formato
application/pdf
Fuente
Acta Universitaria: Multidisciplinary Scientific Journal. Vol. 29 (2019)
Idioma
Español
Relación
https://doi.org/10.15174/au.2019.2146
Repositorio Orígen
Repositorio Institucional de la Universidad de Guanajuato
Descargas
0