Título
Effect of Boriding on the Mechanical Properties of AISI 1045 Steel
Autor
GERMAN ANIBAL RODRIGUEZ CASTRO
IVAN ENRIQUE CAMPOS SILVA
José Francisco Martínez Trinidad
Ulises Figueroa López
LUIS DANTE MELENDEZ MORALES
JESUS VARGAS HERNANDEZ
Nivel de Acceso
Acceso Abierto
Materias
Resumen o descripción
Efecto en las propiedades mecánicas de un acero borurado 1045.
Some mechanical properties of AISI 1045 borided steels were estimated in the present work. The boriding process was carried out by the powder pack method at 950°C with 8 h of treatment. The fatigue strength on borided notched specimens was evaluated with rotating bending tests (R=1) considering a stress concentration factor (Kt) of 2.53. Likewise, the presence of residual stresses in boride layers was established by the XRD technique. The Daimler-Benz Rockwell C test was used, also, to estimate the strength adhesion of the coated system. The results show a decrease in the fatigue strength of AISI borided steels due to the presence of high porosity in the layers. Finally, the Rockwell-C adhesion test showed no coating failure for the boride layer.
Editor
Trans Tech Publications
Fecha de publicación
17 de marzo de 2009
Tipo de publicación
Artículo
Recurso de información
Fuente
1662-8985
Idioma
Inglés
Relación
Vol.;65
Audiencia
Estudiantes
Investigadores
Repositorio Orígen
REPOSITORIO INSTITUCIONAL DE LA UAEM
Descargas
270