Búsqueda avanzada


Área de conocimiento




35 resultados, página 2 de 4

Classification of Cucumber Leaves Based on Nitrogen Content Using the Hyperspectral Imaging Technique and Majority Voting.

Sajad Sabzi Razieh Pourdarbani Mohammad Hossein Rohban Alejandro Fuentes_Penna José Luis Hernández-Hernández Mario Hernández Hernández (2021, [Artículo])

Improper usage of nitrogen in cucumber cultivation causes nitrate accumulation in the fruit and results in food poisoning in humans; therefore, mandatory evaluation of food products becomes inevitable. Hyperspectral imaging has a very good ability to evaluate the quality of fruits and vegetables in a non-destructive manner. The goal of the present paper was to identify excess nitrogen in cucumber plants. To obtain a reliable result, the majority voting method was used, which takes into account the unanimity of five classifiers, namely, the hybrid artificial neural network¿imperialism competitive algorithm (ANN-ICA), the hybrid artificial neural network¿harmonic search (ANN-HS) algorithm, linear discrimination analysis (LDA), the radial basis function network (RBF), and the Knearest- neighborhood (KNN). The wavelengths of 723, 781, and 901 nm were determined as optimal wavelengths using the hybrid artificial neural network¿biogeography-based optimization (ANNBBO) algorithm, and the performance of classifiers was investigated using the optimal spectrum. The results of a t-test showed that there was no significant difference in the precision of the algorithm when using the optimal wavelengths and wavelengths of the whole range. The correct classification rate of the classifiers ANN-ICA, ANN-HS, LDA, RBF, and KNN were 96.14%, 96.11%, 95.73%, 64.03%, and 95.24%, respectively. The correct classification rate of majority voting (MV) was 95.55% for test data in 200 iterations, which indicates the system was successful in distinguishing nitrogen-rich leaves from leaves with a standard content of nitrogen.

artificial neural network cucumber hyperspectral imaging majority voting nitrogen INGENIERÍA Y TECNOLOGÍA CIENCIAS TECNOLÓGICAS TECNOLOGÍA DE LOS ALIMENTOS

Comparison of Different Classifiers and the Majority Voting Rule for the Detection of Plum Fruits in Garden Conditions.

Razieh Pourdarbani Sajad Sabzi Mario Hernández Hernández José Luis Hernández-Hernández Ginés García_Mateos Davood Kalantari José Miguel Molina Martínez (2019, [Artículo])

Color segmentation is one of the most thoroughly studied problems in agricultural applications of remote image capture systems, since it is the key step in several different tasks, such as crop harvesting, site specific spraying, and targeted disease control under natural light. This paper studies and compares five methods to segment plum fruit images under ambient conditions at 12 different light intensities, and an ensemble method combining them. In these methods, several color features in different color spaces are first extracted for each pixel, and then the most e

ective features are selected using a hybrid approach of artificial neural networks and the cultural algorithm (ANN-CA). The features selected among the 38 defined channels were the b* channel of L*a*b*, and the color purity index, C*, from L*C*h. Next, fruit/background segmentation is performed using five classifiers: artificial neural network-imperialist competitive algorithm (ANN-ICA); hybrid artificial neural network-harmony search (ANN-HS); support vector machines (SVM); k nearest neighbors (kNN); and linear discriminant analysis (LDA). In the ensemble method, the final class for each pixel is determined using the majority voting method. The experiments showed that the correct classification rate for the majority voting method excluding LDA was 98.59%, outperforming the results of the constituent methods.

remote sensing in agriculture artificial neural network hybridization environmental conditions majority voting plum segmentation INGENIERÍA Y TECNOLOGÍA CIENCIAS TECNOLÓGICAS TECNOLOGÍA DE LOS ALIMENTOS

In vitro Digestibility of Yarrowia lipolytica Yeast and Growth Performance in Whiteleg Shrimp Litopenaeus vannamei

ANA RUTH ALVAREZ SANCHEZ CLAUDIO HUMBERTO MEJIA RUIZ Héctor Gerardo Nolasco Soria Alberto Peña Rodríguez (2018, [Artículo])

"Marine yeasts used in aquaculture disease control can also be an important protein source for improving feeding and nutrition of crustaceans. Yarrowia lipolyticca has been studied for its capacity to secrete heterologous proteins and high content of unsaturated fatty acids, beta-glucan, and mannane polymers in the cell wall. We measured in vitro digestibility of Y. lipolyticca by whiteleg shrimp Litopenaeus vannamei digestive enzymes, and an in vivo assay of Y. lipolytica in feed onwhiteleg shrimp growth. We found that digestive gland enzymes of shrimp digest Y. lipolytica, based on reduced optical density of a yeast suspension. Digestion was –0.00236 ± 0.00010 OD U min–1 for intact cells and –0.00325 ± 0.00010 OD U min–1 for lysed cells. Release of reducing sugars in intact cells (5.3940 ± 0.1713 μmol h–1), and lysed cells (0.8396 ± 0.2251 μmol h–1) was measured. Digestive gland treatment significantly reduced cell viability (near 100%), relative to the control. Electron microscopy shows that the cell wall of Y. lipolytica exposed to the digestive gland enzymes was severely damaged. Shrimp diet containing Y. lipolytica resulted in significantly higher weight gain and specific growth rate of whiteleg shrimp."

Marine yeast, cell digestibility, cell viability, turbidimetry, reduced sugars BIOLOGÍA Y QUÍMICA CIENCIAS DE LA VIDA BIOQUÍMICA BIOQUÍMICA DE ALIMENTOS BIOQUÍMICA DE ALIMENTOS

Indicadores industriales en el uso del agua: industria alimentaria

RAMON LOPEZ HERNANDEZ (2001, [Libro])

Tabla de contenido: 1. Industria alimentaria -- 2. Proceso de fabricación -- 3. Control de la contaminación -- 4. Parámetros e índices específicos de uso del agua -- 5. Conclusiones -- 6. Bibliografía.

1. Industria alimentaria -- 2. Proceso de fabricación -- 3. Control de la contaminación -- 4. Parámetros e índices específicos de uso del agua -- 5. Conclusiones -- 6. Bibliografía.

Industria de alimentos Consumo industrial de agua Usos del agua Indicadores industrailes CIENCIAS SOCIALES

Diseño y desarrollo de dispositivo de sujeción hidráulica para el proceso de brochado

Design and development of hydraulic clamping device for broaching process

Jorge Morales Carlos Álvarez Raúl Pérez Bustamante (2023, [Artículo])

Se desarrollo un dispositivo de sujeción hidráulica para el proceso de brochado de Brackets usados en los sistemas de frenado de automóviles, que permite reducir la variación del proceso de corte al mejorar el sistema de sujeción y con ello limitar la deformación de la pieza luego de haber sido procesada. Con este concepto de dispositivo es posible mejorar las condiciones del proceso de producción, como lo son: velocidad de corte, reducción de tiempo ciclo, rendimiento de la operación, reducción de costo de scrap, y reducción de tiempo muerto por sobre ajuste de proceso y cambio de modelo. Adicional, se hizo el desarrollo de un sistema de detección de pieza presente que permite captar cuando una pieza no es colocada correctamente en el dispositivo antes de iniciar el ciclo de corte, con esto es posible detectar fallas en el proceso que representen un riesgo para la operación. Durante la etapa de diseño se realizó una simulación del proceso de maquinado en condiciones extremas y condiciones ideales para medir la deformación de la pieza y con esto obtener los parámetros adecuados de corte para la puesta en marcha del dispositivo de sujeción. Para la validación del modelo, se realizó un estudio de habilidad de proceso Cpk y Ppk (acorde a los requerimientos de cliente) para evaluar que el nuevo proceso es eficiente y se encuentra bajo control.

A hydraulic clamping device was developed for the broaching process of Brackets used in automotivebraking systems, which allows reducing the variation of the cutting process by improving the clamping system andthereby limiting the deformation of the piece after having been processed. With this concept of device, it is possibleto improve the conditions of the production process such as: cutting speed, cycle time reduction, operationperformance, scrap cost reduction, and downtime reduction due to process over-adjustment and change over.Additionally, the development of a part detection system was made that allows capturing when a part is not correctlyplaced in the device before starting the cutting cycle, with this it is possible to detect failures in the process thatrepresent a risk to the operation. During the design stage, a simulation of the machining process was carried outin extreme conditions and ideal conditions to measure the deformation of the part and with this obtain theappropriate cutting parameters for the implementation of the clamping device. For the validation of the model, aCpk and Ppk process ability study was carried out (according to customer requirements) to assess that the newprocess is efficient and is under control.

Agradecemos al Centro de Investigación y Asistencia Técnica del Estado de Querétaro, A.C. (CIATEQ) y a la empresa donde fue desarrollado el proyecto por todas las facilidades otorgadas para la realización de dicho proyecto, de igual manera, agradecer por el apoyo brindado a todas las personas involucradas directa o indirectamente en el desarrollo de este trabajo.

Agradecimientos de autoría: Jorge Alberto Morales Martínez: Conceptualización; Metodología; Software; Análisis formal; Investigación; Adquisición de fondos; Recursos; Análisis de datos; Borrador original; Administración de proyecto, Revisión y edición. Carlos Marín: Conceptualización; Ideas; Análisis de datos; Software; Análisis formal y Supervisión. Raúl Pérez Bustamante: Revisión y edición.

Dispositivo de sujeción Proceso de brochado Bracket Sistema de frenado Parámetros de corte Cpk Ppk Clamping device Broaching process Brake system Cutting parameters INGENIERÍA Y TECNOLOGÍA CIENCIAS TECNOLÓGICAS OTRAS ESPECIALIDADES TECNOLÓGICAS OTRAS OTRAS

Development and demographic parameters of Fall Armyworm (Spodoptera frugiperda J.E. Smith) when feeding on rice (Oryza sativa)

Timothy Joseph Krupnik (2023, [Artículo])

Fall Armyworm (FAW), Spodoptera frugiperda (Lepidoptera: Noctuidae), native to the Americas, is a polyphagous insect pest feeding on more than 350 plant species. We studied the developmental and demographic parameters of the maize (Zea mays) strain of FAW on rice (Oryza sativa), and compared the results with its prime host, maize. The developmental period from egg to adult among rice varieties did not differ significantly; however, it did differ significantly between rice and maize, as feeding on rice rather than maize extends development duration of FAW larvae by 15.15%. FAW larvae collected and reared on maize were found to be of significantly higher weight than those reared on rice at two sequential dates of their development; pupal weight however was observed as statistically similar between these two host crops. Regardless of the host, female adults always emerged before males; in maize, female FAW appeared 3.36 days earlier than males. Females derived from rice had longer pre-oviposition periods and shorter oviposition ones than those derived from maize. In rice and maize, the age-specific fecundity rate (mx) peaked at 40 days and 33 days, respectively. When the Fall Armyworm consumed maize instead of rice, there was an increase in the reproduction rate (R 0), the intrinsic rate of natural increase (rm), and the finite rate of increase (λ). For instance, when FAW fed on rice, the rm value was 0.121, whereas it rose to 0.173 when FAW fed on maize. Feeding on rice instead of maize resulted in significantly longer mean length of generation (tG) and doubling time (tD) for the fall armyworm (FAW). This suggests that it took a longer time for the FAW population to double when it was fed rice under controlled greenhouse conditions. In summary, our research suggests that FAW can survive and complete its life cycle on rice plants and on multiple varieties of rice in Bangladesh. However, field verification is necessary before drawing strong conclusions as to the risk posed by FAW in rice. This requires additional studies of FAW and associated insect community dynamics under non-controlled conditions and in the context of multi-species interactions in Asian rice fields.

Invasive Pest Life Table Parameters CIENCIAS AGROPECUARIAS Y BIOTECNOLOGÍA HOST PLANTS PESTS RICE SPODOPTERA FRUGIPERDA FALL ARMYWORMS

Avances en Agricultura Sustentable : Resultados de plataformas de investigación Hub Pacífico Norte 2010-2021

Simon Fonteyne Nele Verhulst (2022, [Libro])

Esta edición presenta los resultados de la red de plataformas en el Hub Pacífico Norte, misma que resulta de la colaboración entre el CIMMYT; el Patronato para la Investigación y Experimentación Agrícola del Estado de Sonora A.C. (PIEAES); el Instituto Nacional de Investigaciones Forestales, Agrícolas y Pecuarias (INIFAP); la Asociación de Agricultores del Río Sinaloa Poniente (AARSP); la Asociación de Agricultores del Río Fuerte Sur (AARFS); la Asociación de Agricultores del Río Culiacán (AARC); la Universidad Autónoma de Sinaloa (UAS); Servicios Agrofinancieros del Norte S.A. de C.V. (SAFINSA); el Club de Labranza de Conservación del Valle del Évora; Granera del Noroeste S.A. de C.V; y el Instituto de Ciencias Agrícolas de la Universidad Autónoma de Baja California (ICA-UABC). Los lectores podrán encontrar en este libro los resultados de las plataformas con más tiempo de operación, en donde ya se han podido generar suficientes datos para sacar conclusiones basadas en evidencias sólidas. Esperamos que el libro pueda servir de inspiración a los productores para que busquen que sus actividades en el campo sean más productivas, rentables y sustentables.

Plataformas de Investigación Maíz Amarillo Pulgón Áreas de extensión Módulos demostrativos Autosuficiencia Alimentaria Uso de Insumos Ganancias para el Productor Nodos de Innovación CIENCIAS AGROPECUARIAS Y BIOTECNOLOGÍA AGRICULTURA DE CONSERVACIÓN COSTOS DE PRODUCCIÓN EUTROFIZACIÓN MONOCULTIVO DEGRADACIÓN DEL SUELO CONTAMINACIÓN PLAGUICIDAS CAMBIO CLIMÁTICO PLATAFORMAS DE INNOVACIÓN EXTENSIÓN AGRÍCOLA AUTOSUFICIENCIA INSUMOS AGRÍCOLAS CONSERVATION AGRICULTURE PRODUCTION COSTS EUTROPHICATION MONOCULTURE SOIL DEGRADATION CONTAMINATION PESTICIDES CLIMATE CHANGE INNOVATION PLATFORMS AGRICULTURAL EXTENSION SELF-SUFFICIENCY FARM INPUTS

LUCHAS FRONTERIZAS POR LA MOVILIDAD Y LA VIDA : UNA ETNOGRAFÍA SOBRE REGÍMENES FRONTERIZOS, MIGRACIONES Y RACISMOS EN TÚNEZ

Edgar Damián Córdova Morales (2023, [Tesis de doctorado])

“A 10 mil kilómetros de la Ciudad de México, hay un puerto llamado Zarzis en el sur de Túnez, cuyas playas son permanentemente abrazadas por las cálidas aguas del mar Mediterráneo. Este país del norte de África ha sido, a lo largo de las últimas décadas, un escenario donde es posible atestiguar y analizar las aceleradas transformaciones de las políticas y prácticas fronterizas emprendidas por la Unión Europea en el Mediterráneo así como sus dramáticos impactos sobre miles de migrantes de todo el continente africano que transitan, viven y sobreviven en esta convulsa región del mundo, antes de intentar cruzar el mar en dirección de Europa. En las afueras de Zarzis, la fachada inadvertida de una casa en una polvorienta calle esconde el “Museo de la Memoria del Mar”, cuyas instalaciones artísticas con galería de arte contemporáneo de Ciudad de México, Casablanca o Paris. Cada día desde hace varios años, migrantes de distintos rincones del continente africano zarpan del sur tunecino para intentar atravesar el mar Mediterráneo de forma irregularizada y subvertir las fronteras de la Unión Europea en búsqueda de una vida mejor. Historias como estas constituyen el corazón de esta tesis, cuya etnografía realice en 2019, específicamente en el puerto de Zarzis, la ciudad de Medenine, y en menor medida la capital tunecina. Mi propuesta principal es que Túnez, y particularmente el sur del país, es un espacio etnográfico clave desde el cual analizar más ampliamente las políticas fronterizas en el Mediterráneo central en sus distintos papeles como histórico país de origen, de tránsito y más recientemente de destino forzado para migrantes procedentes principalmente de la vecina Libia. África subsahariana y occidental. Asimismo, como socio clave de la Unión Europea, Túnez un país que permite entender, la conformación reproducción y los efectos que nombro como el régimen fronterizo euro-mediterráneo”.

Migración internacional. Refugiados - Historia - Siglo XXI. Migración forzada - Túnez. Refugiados - Política gubernamental - Países de la Unión Europea. Desplazados - Túnez. Migrantes africanos - Asistencia especial - Túnez. Refugios para personas migrantes. Tesis - Doctorado en Antropología, CDMX. CIENCIAS SOCIALES DEMOGRAFÍA DEMOGRAFÍA GEOGRÁFICA MOVILIDAD Y MIGRACIONES INTERNACIONALES MOVILIDAD Y MIGRACIONES INTERNACIONALES

Implicaciones jurídicas de la imposición de la medida provisional de aseguramiento a equipos de cómputo por presunto uso ilegal de programas de computación

Arturo Merino García (2023, [Otro, Trabajo de grado, maestría])

El uso de equipos de cómputo y principalmente de los programas de computación, implica la interacción de diversas disciplinas jurídicas, entre las que se encuentran las de tipo fiscal, laboral, de seguridad social, protección a la salud, protección de datos, impartición de justicia, derecho de autor y derecho

de propiedad industrial.

Por ello se ofrece una solución para prevenir una contingencia legal, causada por desconocimiento en el uso de los programas de cómputo, específicamente

aquellas relacionadas con la solicitud de declaración administrativa de infracción, en materia de comercio y las medidas provisionales de aseguramiento, previstas en la Ley Federal del Derecho de Autor (LFDA) y la Ley Federal de Protección a la Propiedad Industrial (LFPPI).

Sistemas para computadoras INGENIERÍA Y TECNOLOGÍA CIENCIAS TECNOLÓGICAS CIENCIAS TECNOLÓGICAS