In-service weld repair by direct deposition: numerical simulation and experimental validation

LUIS DANTE MELENDEZ MORALES Jose Jorge Ruiz Mondragon MARICRUZ HERNANDEZ HERNANDEZ (2023, [Artículo])

In-Service Welding is a technological process for which interconnection and repair of pipelines can be made while they are in operation, before making it two main risks need to be assessed: hydrogen cracking and burn-through. Current simulations and validations assess these risks independently, but due to its interdependence these risks need to be assessed in conjunction. A repair method not normally used, but with high potential due to its simplicity and versatility is the direct deposition of weld. In the present research, a fluid-thermo-mechanical coupled simulation and validation were done of an in-service welding repair by direct deposition on a flowing pressurized pipe having an internal defect. The results demonstrated the effectiveness of using this repair method to restore the mechanical strength of pipelines. Surface, sub-surface, and volumetric non-destructive examinations evidenced no cracking immediately to finish the repair and delayed. Temperature tendency curves showed good approximations having a maximum difference of 5.09 % between numerical and experimental. Perimeter deformation along the pipe length between numerical and experimental results displayed a similar behaviour with a significant difference in the numerical values attributed to the lack of input data for weld properties. The structural analysis performed in this study used the approach of the risk of burn-through under internal pressure determined by the occurrence of localized radial bulging. Numerical results indicated no relevant plastic strain occurs. Is strongly recommended that thermal analysis assessments using the actual defect morphology would be performed, not only considering the remaining thickness of the pipe.

Declaration of Competing Interest: The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper.

Acknowledgements: The authors gratefully acknowledge to Petropipe de Mexico for technical support, materials and equipment needed for the experimental validation. The first author wants also to acknowledge to CONAHCYT (Consejo Nacional de Humanidades, Ciencias y Tecnologías), for the post-graduate scholarship received.

In-service welding Burn-through Hydrogen cracking Weld repair INGENIERÍA Y TECNOLOGÍA CIENCIAS TECNOLÓGICAS OTRAS ESPECIALIDADES TECNOLÓGICAS OTRAS OTRAS

Simulación y validación de la reparación de ductos en servicio por la deposición directa de soldadura

LUIS DANTE MELENDEZ MORALES (2023, [Tesis de doctorado])

El transporte de hidrocarburos por ductos enterrados es la forma más segura, confiable y económica para su suministro, estos pueden extenderse grandes longitudes territoriales e inclusive atravesar países con tal de satisfacer la demanda energética. No obstante, los ductos pueden sufrir daños provocados por el ambiente, su operación o bien provocados por terceros, siendo necesario que sean intervenidos reemplazando las secciones dañadas. Las regulaciones nacionales y tratados internacionales desalientan la liberación de grandes cantidades de gas natural a la atmósfera, por demás de que un paro de suministro conlleva a desabasto energético, multas y a costosas operaciones asociadas con la rehabilitación del ducto, forzando a soldar envolventes y accesorios sin detener la operación de los ductos, esto se conoce como “soldadura en servicio”. La soldadura en servicio es un proceso tecnológico, por el cual se puede efectuar la interconexión y la reparación de ductos mientras están en operación, previo a realizar estas actividades, se requiere que dos riesgos sean evaluados: agrietamiento por hidrógeno y quemada pasante. Las simulaciones actuales y validaciones evalúan estos riesgos de forma independiente, pero debido a su interdependencia estos riesgos deben evaluarse en conjunto. Un método de reparación que no es normalmente empleado, pero con un alto potencial debido a su simplicidad y versatilidad, es la deposición directa de soldadura. En la presente investigación, se realizó una simulación numérica fluido-termo-mecánica acoplada con validación experimental, de la reparación de un tubo con flujo presurizado conteniendo un defecto interno por la deposición directa de soldadura. Por medio de la cual, es posible predecir el comportamiento estructural del ducto mientras se realiza la reparación.

La simulación numérica se efectuó con el apoyo del software ANSYS versión académica 22R2, siendo esta una herramienta de última generación capaz de contribuir en la predicción de mecanismos complejos como lo es la soldadura en servicio, incrementando con ello la seguridad y confiabilidad de estas operaciones. Cabe hacer mención, que la regulación nacional prohíbe la reparación de defectos internos por la deposición directa de soldadura, esto se debe principalmente a la falta de investigaciones validadas que respalden su viabilidad. Los resultados demostraron la efectividad de emplear este método de reparación para restaurar la resistencia mecánica de los ductos. Las inspecciones por pruebas no destructivas superficiales, subsuperficiales y volumétricas, evidenciaron que no ocurrió agrietamiento inmediatamente al finalizar la reparación y retardada (posterior a por lo menos 12 horas después de haberse finalizada la reparación, tiempo suficiente para permitir la difusión de hidrógeno atómico a hidrógeno molecular). Las curvas de tendencia de temperatura mostraron buena aproximación teniéndose una diferencia máxima de 5.09% entre los resultados numéricos y experimental. Los resultados numéricos y experimentales de la deformación perimetral a lo largo de la longitud de la tubería mostraron un comportamiento similar con una diferencia significativa del 17.7% entre los valores numéricos atribuidos a la falta de información de entrada para las propiedades de la soldadura. El análisis estructural efectuado en este estudio emplea la estimación del riesgo de quemada pasante bajo presión interna, determinado por la ocurrencia de abultamiento radial localizado. Los resultados numéricos indican que no ocurre deformación plástica relevante. Se hace una fuerte recomendación para que las evaluaciones de análisis térmico empleen la morfología actual del defecto y no solo consideren el espesor remanente del tubo. De acuerdo con la revisión bibliográfica realizada y recientemente publicada, este tipo de simulación numérica acoplada con validación experimental de la reparación de ductos en servicio por deposición directa de soldadura para la reparación de defectos internos contemplando la prevención de quemada pasante y agrietamiento por hidrógeno no ha sido realizada con anterioridad.

Hydrocarbon transportation by buried pipelines is the safest, most reliable, and economical way for its supply; these can extend long territorial distances and even cross countries with the purpose of satisfying the energy demand. However, the pipelines can suffer damages caused by their environment, their operation, or provoked by third parties, making necessary interventions to replace the damaged sections. National regulations and international agreements discourage the release of large quantities of natural gas into the atmosphere; moreover, a stop in its supply entails an energetic shortage, fines, and expensive operations associated with the pipeline rehabilitation, forcing to weld sleeves and fittings without stop the pipeline operation, this is known as “In-Service Welding”. In-Service welding is a technological process for which interconnection and repair of pipelines can be made while they are in operation; before making it, two main risks need to be assessed: hydrogen cracking and burn-through. Current simulations and validations assess these risks independently, but due to their interdependence, these risks need to be assessed in conjunction. A repair method not normally used but with high potential due to its simplicity and versatility is the direct deposition of the weld. In the present research, a fluid-thermo-mechanical coupled numerical simulation with experimental validation was done of a repair on a pipe with pressurized flow having an internal defect by direct deposition of the weld. It is possible predict the structural behavior of a pipeline while the reparation is performed.

The numerical simulation was done with the support of ANSYS software academic version 22R2, the latest generation tool able to contribute to the prediction of complex mechanisms, as is in-service welding, increasing the security and confidence of these operations. It is worth mentioning that national regulation forbids the reparation of internal defects for direct deposition of the weld; the main reason is the lack of validated investigations supporting its viability. The results demonstrated the effectiveness of using this repair method to restore the mechanical strength of pipelines. Surface, sub-surface, and volumetric non-destructive inspections evidenced no cracking immediately to finish the repair and delayed (after at least 12 hours of having finished the repair, time enough to allow the hydrogen diffusion from atomic hydrogen to molecular hydrogen). Temperature tendency curves showed good approximations, having a maximum difference of 5.09 % between numerical and experimental. Perimeter deformation along the pipe length between numerical and experimental results displayed a similar behavior with a significant difference of 17.7% against numerical values attributed to the lack of input data for weld properties. The structural analysis performed in this study used the approach of the risk of burn-through under internal pressure determined by the occurrence of localized radial bulging. Numerical results indicated no relevant plastic strain occurs. It is strongly recommended that thermal analysis assessments using the actual defect morphology be performed, not only considering the remaining thickness of the pipe. According to the bibliographic revision performed and recently published, this kind of coupled numerical simulation of in-service repair or pipelines by direct deposition for repairing internal defects considering the prevention of burn-through and hydrogen cracking has not been done.

Ducto Soldadura en servicio Quemada pasante Agrietamiento por hidrógeno Reparación de soldadura Simulación numérica Pipeline In-service welding Burn-through Hydrogen cracking Weld repair Numerical simulation INGENIERÍA Y TECNOLOGÍA CIENCIAS TECNOLÓGICAS OTRAS ESPECIALIDADES TECNOLÓGICAS OTRAS ESPECIALIDADES TECNOLÓGICAS

Economic valuation of climate induced losses to aquaculture for evaluating climate information services in Bangladesh

Peerzadi Rumana Hossain T.S Amjath-Babu Timothy Joseph Krupnik (2023, [Artículo])

Very little research has focused on climate impacts on aquaculture and the potential of climate information services (CIS) for aquaculture to support sustainable development goals 2030 (SDGs)1. This study represents an effort to bridge this gap by conducting a first ex-ante economic evaluation of CIS for aquaculture in Bangladesh by semi-automating the extraction of data on climate-induced fish losses during 2011 to 2021 from popular online newspaper articles and corroborating them with available government and satellite datasets. During this period, Bangladesh faced an estimated loss of around 140 million USD for hatcheries, open water fish and shrimp. When validated with a year of country-wide official data on climate-induced economic losses to aquaculture, the damage reported from these media sources is approximately 10 percent of actual losses. Given this rule of thumb, the potential economic value of aquacultural CIS could be up to USD14 million a year, if 10 percent of the damage can be offset by appropriate services through a range of multi-sector efforts to establish and extend these services to farmers at scale.

Climate Information Services Newspaper Scraping CIENCIAS AGROPECUARIAS Y BIOTECNOLOGÍA LOSSES AQUACULTURE CLIMATE SERVICES SUSTAINABLE DEVELOPMENT GOALS

User manual: How to use Agvisely to generate climate service advisories for livestock in Bangladesh

T.S Amjath-Babu Timothy Joseph Krupnik (2023, [Libro])

The Agvisely digital service for livestock integrates location-specific meteorological forecasts generated by the Bangladesh Meteorological Department (BMD) with species specific biological thresholds for weather variables (Temperature, rainfall, and temperature-humidity index (THI). When a biological threshold is to be breached in next five days' forecast, the system automatically generates location-specific management advice for livestock farmers. Advisories are based on a decision tree developed by the Bangladesh Livestock Research Institute (BLRI) and CIMMYT. Agvisely is a smart phone app and web-based service developed by the International Maize and Wheat Improvement Center (CIMMYT) CIMMYT with the support of USAID, securing the Food Systems of Asian Mega- Deltas (AMD) for Climate and Livelihood Resilience and the Transforming Agrifood Systems in South Asia (TAFSSA) initiatives in collaboration with Bangladesh Dept. of Agricultural Extension (DAE) and Bangladesh Meteorological Department (BMD).

CIENCIAS AGROPECUARIAS Y BIOTECNOLOGÍA CLIMATE SERVICES LIVESTOCK DIGITAL TECHNOLOGY

Calibrated multi-model ensemble seasonal prediction of Bangladesh summer monsoon rainfall

Nachiketa Acharya Carlo Montes Timothy Joseph Krupnik (2023, [Artículo])

Bangladesh summer monsoon rainfall (BSMR), typically from June through September (JJAS), represents the main source of water for multiple sectors. However, its high spatial and interannual variability makes the seasonal prediction of BSMR crucial for building resilience to natural disasters and for food security in a climate-risk-prone country. This study describes the development and implementation of an objective system for the seasonal forecasting of BSMR, recently adopted by the Bangladesh Meteorological Department (BMD). The approach is based on the use of a calibrated multi-model ensemble (CMME) of seven state-of-the-art general circulation models (GCMs) from the North American Multi-Model Ensemble project. The lead-1 (initial conditions of May for forecasting JJAS total rainfall) hindcasts (spanning 1982–2010) and forecasts (spanning 2011–2018) of seasonal total rainfall for the JJAS season from these seven GCMs were used. A canonical correlation analysis (CCA) regression is used to calibrate the raw GCMs outputs against observations, which are then combined with equal weight to generate final CMME predictions. Results show, compared to individual calibrated GCMs and uncalibrated MME, that the CCA-based calibration generates significant improvements over individual raw GCM in terms of the magnitude of systematic errors, Spearman's correlation coefficients, and generalised discrimination scores over most of Bangladesh areas, especially in the northern part of the country. Since October 2019, the BMD has been issuing real-time seasonal rainfall forecasts using this new forecast system.

Multi-Model Ensemble Seasonal Forecasting CIENCIAS AGROPECUARIAS Y BIOTECNOLOGÍA CLIMATE SERVICES FORECASTING MONSOONS

Análisis de velocidad de soldadura robotizada para proceso MIG en acero1045 AISI

Carlos Eduardo Hernández Acero (2022, [Tesis de maestría])

Esta investigación denominada “análisis de velocidad de soldadura robotizada para proceso MIG en acero 1045 AISI” busca el desarrollo de un modelo matemático que permita, mediante parámetros conocidos, el cálculo de la penetración de soldadura en piezas unidas con proceso Metal Inert Gas (MIG). El objetivo se centra en buscar la combinación de valores paramétricos para la velocidad de soldadura, el voltaje y la corriente, los que se obtienen mediante la aplicación de un diseño experimental, que, ejecutadas en el proceso, pueda lograr una penetración de soldadura aceptable para la unión de la pieza. El modelo de superficie de respuesta aplicado fue un diseño de experimentos 2k con diseño central compuesto, y posteriormente el modelo se utilizó para estimar la velocidad de soldadura. Este diseño de experimentos se ejecutó por medio del programa estadístico Minitab versión 17. (Hernández Acero et al., 2022). Una vez teniendo la penetración de soldadura deseada en la pieza, se puede calcular la velocidad de soldadura necesaria para el cálculo de tiempo ciclo y utilizar los parámetros definidos de corriente y voltaje. Los valores de estos factores serán útiles para comenzar la programación del robot ya con la celda funcional y reducir el tiempo de arranque en automático (Hernández Acero et al., 2022).

This research, named “robotic welding speed analysis for MIG process in 1045 AISI steel”, seeks to develop a mathematical model that allow, through know parameters, the calculation of welding penetration in parts joined with Metal Inert Gas (MIG) process. The objective is focused on finding the combination of parametric values for robot welding speed, voltage and current, which are obtained through the application of a design of experiments, which, executed in the process, can achieve an acceptable welding penetration for the union of the part. The response surface model applied was a 2k design of experiments with central composite design, and subsequently the model was used to estimate the welding speed. This design of experiments was obtained using the statistical software Minitab version 17. (Hernández Acero et al., 2022). Once having the desired welding penetration in the part, it can calculate the welding speed necessary for the cycle time calculation and use the defined parameters of current and voltage to start programming the robot with the functional cell and reduce the time of startup (Hernández Acero et al., 2022).

Soldadura MIG Penetración Tiempo ciclo Velocidad de soldadura MIG welding Penetration Cycle time Welding speed INGENIERÍA Y TECNOLOGÍA CIENCIAS TECNOLÓGICAS OTRAS ESPECIALIDADES TECNOLÓGICAS OTRAS OTRAS

Vibrissa growth rate in California sea lions based on environmental and isotopic oscillations

MARTHA PATRICIA ROSAS HERNANDEZ (2018, [Artículo])

Pinniped vibrissae provide information on changes in diet at seasonal and annual scales; however, species-specific growth patterns must first be determined in order to interpret these data. In this study, a simple linear model was used to estimate the growth rate of vibrissae from adult female California sea lions (Zalophus californianus) from San Esteban Island in the Gulf of California, Mexico. The δ15N and δ13C values do not display a marked oscillatory pattern that would permit direct determination of the time period contained in each vibrissa; thus, time (age) was calculated in two ways: 1) based on the correlation between the observed number of peaks (Fourier series) in the δ15N profile and the length of each vibrissa, and 2) through direct comparison with the observed number of peaks in the δ15N profile. Cross-correlation confirmed that the two peaks in the δ15N profile reflected the two peaks in the chlorophyll-a concentration recorded annually around the island. The mean growth rate obtained from the correlation was 0.08 ± 0.01 mm d-1, while that calculated based on the observed number of peaks was 0.10 ± 0.05 mm d-1. Both are consistent with the rates reported for adult females of other otariid species (0.07 to 0.11 mm d-1). Vibrissa growth rates vary by individual, age, sex, and species; moreover, small differences in the growth rate can result in significant differences over the time periods represented by the isotopic signal. Thus, it is important to assess this parameter on a species-by-species basis. © 2018 Rosas-Hernández et al. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.

carbon, nitrogen, animal, California, chemistry, diet, female, island (geological), Mexico, Otariidae, physiology, Animals, California, Carbon Isotopes, Diet, Female, Islands, Mexico, Nitrogen Isotopes, Sea Lions BIOLOGÍA Y QUÍMICA CIENCIAS DE LA VIDA INMUNOLOGÍA INMUNOLOGÍA

De Novo assembly and annotation of the Pacific calico scallop (Argopecten ventricosus) transcriptome for immune-related gene discovery

RUTH ESCAMILLA MONTES GENARO DIARTE PLATA GABRIELA BERENICE MENDOZA MALDONADO Aarón Barraza Celis Carlos Eliud Angulo Valadez Seyed Hossein Hoseinifar Jesús Arturo Fierro Coronado ANTONIO LUNA GONZALEZ (2022, [Artículo])

"Invertebrates' immune defense mechanisms play a critical role in pathogen recognition and elimination. De novo assembly and annotation of the Argopecten ventricosus transcriptome were performed for the immune-related gene identification. Scallops (height: 4.4 cm) were challenged with inactivated Vibrio parahaemolyticus IPNGS16. The RNA from different tissues was pooled for a single cDNA library construction sequenced by NextSeq 500 platform 2×75 paired‐end chemistry. Before de novo assembling with Trinity, reads were analyzed with FastQC, Trimmomatic, and Prinseq. Assembled sequences were analyzed by CD-HIT-EST and TransDecoder. The corresponding annotation was performed against NCBI-nr, RefSeq protein, and KAAS (KEGG) databases. The Trinity assembly yielded 107,516 contigs. TransDecoder yielded 25,285 sequences as CDSs of which, 16,123 were annotated against the NCBI-nr protein, most of them scored with Crassostrea gigas data. Gene ontology mapped sequences (15,262) were classified in molecular functions (~13,000), cellular components (~11,000), and biological processes (~13,000). The KAAS analysis showed biological categories for metabolism (13%), cellular processes (12%), genetic information processing (10%), organismal systems (19%), environmental information (13%), and human diseases (33 %). Within the organismal systems, 467 immune-related genes (KO) were identified. Sixty-four immune-related genes were annotated/blasted against the NCBI-nr and RefSeq protein databases. An RT-qPCR was performed to analyze the expression level of immune-related genes obtained in the transcriptome analysis in scallops (height 4.5 cm) treated with probiotic bacilli added to culture water. Bacilli significantly increased the expression of the HSP70 and PGRP genes. The gene transcripts analysis of A. ventricosus will better understand its immune response against pathogens in culture systems."

Argopecten ventricosus, calico scallop, transcriptome, bivalve, immune genes BIOLOGÍA Y QUÍMICA CIENCIAS DE LA VIDA BIOLOGÍA ANIMAL (ZOOLOGÍA) INMUNOLOGÍA INMUNOLOGÍA

Emprendimiento innovador: el caso de los empresarios de software en Yucatán

ANEL FLORES NOVELO ANA LAURA BOJORQUEZ CARRILLO (2018, [Artículo])

La mayor parte de los estudios de innovación y emprendimiento se han desarrollado en países desarrollados, por lo que es relevante el estudio de las características del emprendimiento innovador contextualizados en países latinoamericanos. Es así que este trabajo aporta conocimientos tendientes a entender mejor el fenómeno emprendimiento mediante el análisis de la actividad emprendedora innovadora desarrollada en el sureste de México. Específicamente se estudia a los empresarios desarrolladores de software ubicados en el estado de Yucatán. Este trabajo aporta conocimiento sobre los factores que propician el desarrollo de innovaciones en empresas tecnológicas ubicadas en contextos de economía tradicional y el impacto de estas innovaciones en el desempeño empresarial. Se analiza los factores que propician el desarrollo de estas innovaciones como son los antecedentes familiares, la formación profesional. Asimismo se destaca la importancia de los emprendimientos proactivos y el papel de este tipo de motivación para lograr que negocios innovadores de corte tecnológico como el software generen buenos resultados en un ecosistema emprendedor poco favorable, como el de Yucatán. Finalmente aporta evidencia empírica de la relación entre el desarrollo de innovaciones y el desempeño empresarial.

CIENCIAS SOCIALES Emprendimiento Innovación Software Desempeño

Nanovacunas que valen oro

Carlos Eliud Angulo Valadez LUIS HERNANDEZ ADAME Ana Aguilera-Juarez (2022, [Artículo])

nanopartículas de oro BIOLOGÍA Y QUÍMICA CIENCIAS DE LA VIDA INMUNOLOGÍA VACUNAS VACUNAS