Repositorio Nacional

In-Service Welding is a technological process for which interconnection and repair of pipelines can be made while they are in operation, before making it two main risks need to be assessed: hydrogen cracking and burn-through. Current simulations and validations assess these risks independently, but due to its interdependence these risks need to be assessed in conjunction. A repair method not normally used, but with high potential due to its simplicity and versatility is the direct deposition of weld. In the present research, a fluid-thermo-mechanical coupled simulation and validation were done of an in-service welding repair by direct deposition on a flowing pressurized pipe having an internal defect. The results demonstrated the effectiveness of using this repair method to restore the mechanical strength of pipelines. Surface, sub-surface, and volumetric non-destructive examinations evidenced no cracking immediately to finish the repair and delayed. Temperature tendency curves showed good approximations having a maximum difference of 5.09 % between numerical and experimental. Perimeter deformation along the pipe length between numerical and experimental results displayed a similar behaviour with a significant difference in the numerical values attributed to the lack of input data for weld properties. The structural analysis performed in this study used the approach of the risk of burn-through under internal pressure determined by the occurrence of localized radial bulging. Numerical results indicated no relevant plastic strain occurs. Is strongly recommended that thermal analysis assessments using the actual defect morphology would be performed, not only considering the remaining thickness of the pipe.

Declaration of Competing Interest: The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper.

Acknowledgements: The authors gratefully acknowledge to Petropipe de Mexico for technical support, materials and equipment needed for the experimental validation. The first author wants also to acknowledge to CONAHCYT (Consejo Nacional de Humanidades, Ciencias y Tecnologías), for the post-graduate scholarship received.

In-service welding Burn-through Hydrogen cracking Weld repair INGENIERÍA Y TECNOLOGÍA CIENCIAS TECNOLÓGICAS OTRAS ESPECIALIDADES TECNOLÓGICAS OTRAS OTRAS

Wheat seed demand assessment assisted by genotyping in Ethiopia

Moti Jaleta Kindie Tesfaye Olaf Erenstein (2023, [Artículo])

This study examines the extent to which wheat varieties supplied by the formal seed system align with the varieties demanded and used by farmers in Ethiopia. The framework of stated and revealed preferences drawn from the consumer preference theory is used to analyze farmer demand for different wheat varieties. We used official data from the formal seed sector and representative survey data from wheat farm households in Ethiopia. The survey data allow to contrast the farmer reported varietal use with genotyping by sequencing (also known as DNA fingerprinting). Farmers' reliance on informal seed sources and own saved seed, among others, contributes to the misidentification of the varieties they grow. Consequently, farmers are likely to misinform the formal seed demand assessment leading to either an over- or underestimation of actual seed demand for specific wheat varieties. Genotyping by sequencing, as opposed to farmer reports, established the persistence of old varieties. This also implies vulnerability of wheat production to disease dynamics depending on the longevity of disease resistance by the variety in use. Apart from narrowing the gap between the actual and stated demand and ensuring timely replacement of wheat varieties, genotyping-assisted estimates can save seed carry-over cost. Genotyping by sequencing is increasingly used as the new benchmark and gold standard for identifying and tracking the adoption of crop varieties. The technique has potential to enhance the performance of the seed sector through effective planning that can optimize resource commitments and accelerate the rate of varietal replacement.

Seed Demand Varietal Replacement CIENCIAS AGROPECUARIAS Y BIOTECNOLOGÍA GENOTYPING-BY-SEQUENCING SEEDS WHEAT

The potential of UAV and very high-resolution satellite imagery for yellow and stem rust detection and phenotyping in Ethiopia

Gerald Blasch David Hodson Francelino Rodrigues (2023, [Artículo])

Very high (spatial and temporal) resolution satellite (VHRS) and high-resolution unmanned aerial vehicle (UAV) imagery provides the opportunity to develop new crop disease detection methods at early growth stages with utility for early warning systems. The capability of multispectral UAV, SkySat and Pleiades imagery as a high throughput phenotyping (HTP) and rapid disease detection tool for wheat rusts is assessed. In a randomized trial with and without fungicide control, six bread wheat varieties with differing rust resistance were monitored using UAV and VHRS. In total, 18 spectral features served as predictors for stem and yellow rust disease progression and associated yield loss. Several spectral features demonstrated strong predictive power for the detection of combined wheat rust diseases and the estimation of varieties’ response to disease stress and grain yield. Visible spectral (VIS) bands (Green, Red) were more useful at booting, shifting to VIS–NIR (near-infrared) vegetation indices (e.g., NDVI, RVI) at heading. The top-performing spectral features for disease progression and grain yield were the Red band and UAV-derived RVI and NDVI. Our findings provide valuable insight into the upscaling capability of multispectral sensors for disease detection, demonstrating the possibility of upscaling disease detection from plot to regional scales at early growth stages.

Very High Resolution Imagery Disease Detection Methods Early Growth Stages CIENCIAS AGROPECUARIAS Y BIOTECNOLOGÍA UNMANNED AERIAL VEHICLES STEM RUST PHENOTYPING HIGH-THROUGHPUT PHENOTYPING WHEAT

Remedies for the Inconsistences in the Times of Execution of the Unsorted Database Search Algorithm within the Wave Approach

Manuel Ávila Aoki José Benito Elizalde Salas (2017, [Artículo])

The typical semiclassical wave version of the unsorted database search algorithm based on a system of coupled simple harmonic oscillators does not consider an important ingredient of Grovers original algorithm as it is quantum entanglement. The role of entanglement in the wave version of the unsorted database search algorithm is explored and contradictions with the time of execution of Grovers algorithm are found. We remedy the contradictions by employing two arguments, one of them qualitative and the other quantitative. For the qualitative argument we employ the probabilistic nature of a legitimate quantum algorithm and remedy the above inconsistence. Within the quantitative argument we identify a parameter in the wave version of the unsorted database search algorithm which is related to entanglement. The contradiction with the time of execution of Grovers algorithm is solved by choosing an appropriate values of such a parameter which incorporates entanglement to the wave version of the unsorted database search algorithm. The utility of the present arguments are evident if the wave version of the unsorted data base search algorithm is experimentally implemented through a system of N quantum dots with a harmonic oscillator potential as a confinement potential for each of the quantum dots. Each of the above N vibrating quantum dots must be coupled to an extra single vibrating quantum dot which entangles to all of them. In order to obtain optimal results, the coupling constants of the mentioned quantum dots should be adjusted in the way described in the present work.

Computación Unsorted database search Grover algorithm wave entanglement queries time Computación Unsorted database search Grover algorithm wave entanglement queries time INGENIERÍA Y TECNOLOGÍA