Filtrar por:
Tipo de publicación
- Artículo (127)
- Tesis de maestría (33)
- Capítulo de libro (16)
- Otro (11)
- Trabajo terminal, especialidad (11)
Autores
- Velitchko Tzatchkov (12)
- CARLOS FUENTES RUIZ (9)
- WALDO OJEDA BUSTAMANTE (9)
- VICTOR HUGO ALCOCER YAMANAKA (8)
- Felipe Arreguin (5)
Años de Publicación
Editores
- Instituto Mexicano de Tecnología del Agua (30)
- El autor (18)
- Universidad Autónoma Metropolitana (México). Unidad Azcapotzalco. Coordinación de Servicios de Información. (13)
- CICESE (9)
- Universidad Autónoma Metropolitana (México). (7)
Repositorios Orígen
- Repositorio institucional del IMTA (70)
- Repositorio Institucional de Publicaciones Multimedia del CIMMYT (42)
- Repositorio Institucional Zaloamati (26)
- Repositorio Institucional CICESE (16)
- Repositorio Digital CIDE (14)
Tipos de Acceso
- oa:openAccess (205)
Idiomas
Materias
- CIENCIAS AGROPECUARIAS Y BIOTECNOLOGÍA (59)
- INGENIERÍA Y TECNOLOGÍA (59)
- CIENCIAS SOCIALES (40)
- HUMANIDADES Y CIENCIAS DE LA CONDUCTA (31)
- Modelos matemáticos (29)
Selecciona los temas de tu interés y recibe en tu correo las publicaciones más actuales
Caracterización hidrodinámica de los suelos a partir del perfil de las presiones
Antonio Celso Dantas Antonino CARLOS FUENTES RUIZ Claude Hammecker (2005, [Artículo])
Las características hidrodinámicas de los suelos formadas por las curvas de retención de humedad del suelo y de la conductividad hidráulica, son estimadas mediante modelación inversa con la ecuación de Richards. Se ha aceptado la función hiperbólica general presentada por Braddock et al. (2001) para la curva de retención y tres modelos fractales de la conductividad hidráulica propuestos por Fuentes et al. (2001): los modelos del poro de la media geométrica, del poro neutral y del poro grande. La función hiperbólica contiene seis parámetros (θr, θs, ψd, λ, m, n); los contenidos de humedad residual (θr) y a saturación (θs) son asumidos iguales a cero y a la porosidad volumétrica total del suelo, respectivamente. Para obtener formas analíticas cerradas de la conductividad hidráulica a partir de los modelos fractales y explicitar la función θ(ψ), los tres parámetros de forma (λ, m, n) son reducidos a uno (m); la presión característica (ψd) y la conductividad hidráulica a saturación (Ks) forman parte de los parámetros desconocidos del sistema (ψd, Ks, m), los cuales pueden ser obtenidos replicando las observaciones de la presión en el perfil del suelo. Los parámetros obtenidos permiten reproducir las presiones observadas en una profundidad de 11 cm, mediante el criterio de mínimos cuadrados; las presiones observadas en sus extremos son las condiciones de frontera y la condición inicial es obtenida con una interpolación lineal. La raíz del error cuadrático medio del grado efectivo de saturación indica que no existen diferencias significativas entre los tres modelos para describir la evolución temporal de la presión experimental. Sin embargo, las diferencias son significativas en la capacidad de predicción de la evolución temporal del contenido de humedad en la profundidad de 11 cm, y en la predicción de la curva de retención experimental; el mejor modelo de predicción es el modelo del poro grande, seguido por el modelo del poro neutral y, finalmente, por el modelo del poro de la media geométrica.
Conductividad hidráulica Humedad del suelo Curvas de retención Modelos fractales Método inverso CIENCIAS AGROPECUARIAS Y BIOTECNOLOGÍA
The Mexican environmental flow standard: scope, application and implementation
MARIA ANTONIETA GOMEZ BALANDRA MARIA DEL PILAR SALDAÑA FABELA MARICELA MARTINEZ JIMENEZ (2014, [Artículo])
With the implementation of the Official Mexican Standard NOM-011-CONAGUA-2000, the water balance of 730 basins has been calculated and its water availability agreement is published. This rule points out to allocate water for the environment only as an annual volume since methods for estimating environmental flows were not standardized in the country. In this paper, an analysis of the environmental flow standard and examples of the suggested hydrological methods are presented. For its implementation, some steps are taking place, mainly establishing environmental water reserves and building capacities. In addition, environmental allocations are becoming a common practice for all water projects, as well as setting limits to hydrological alterations by hydroelectric dams. The standard promotes the use of technical integration tools to analyze the responses of ecosystems to changes in the flow regime and adaptive management under different scenarios of water use. Although the main steps have been taken, its implementation as mandatory rule will take time.
Flujos ambientales Modelos hidrológicos Normas técnicas BIOLOGÍA Y QUÍMICA
Current variability by wave propagation in Todos Santos Bay, Baja California
Variabilidad de corrientes por propagación de ondas en bahía Todos Santos, Baja California, México
EFRAIN MATEOS FARFAN SILVIO GUIDO LORENZO MARINONE MOSCHETTO (2017, [Artículo])
The temperature, velocity, and sea level fields for a summer climatological month (August) were analyzed using tridimensional and baroclinic model outputs in Todos Santos Bay (TSB), Baja California, Mexico. The numerical model was forced with wind (nonstationary), heat flux, and California Current System climatology on the open boundary. The 3- to 5-day current variability is related to a baroclinic wave traveling towards the northwest of the bay. Wave travel periodicity was due to the release of accumulated water from the Ensenada–Punta Banda Estuary (E–PBE) region. Local wind stress causes southeastward water flow and, given the TSB geometry, water accumulates in the E–PBE region. Weakening wind stress was the main cause of water release. In addition, complex empirical ortogonal function analysis found that outer TSB disturbances cause sea level variability.
Ondas subinerciales Modelos matemáticos Bahía Todos Santos CIENCIAS FÍSICO MATEMÁTICAS Y CIENCIAS DE LA TIERRA
Decaimiento del cloro por reacción con el agua en redes de distribución
Velitchko Tzatchkov VICTOR HUGO ALCOCER YAMANAKA Felipe Arreguin (2004, [Artículo])
Se analiza la ecuación cinética de la reacción del cloro residual libre con el agua, separada de la reacción con la pared de las tuberías, con base en muestras tomadas en 64 puntos de la red de agua potable de una ciudad. Se obtiene que la ecuación cinética de primer orden no describe adecuadamente el decaimiento real y, en su lugar, se propone una ecuación cinética de orden mixto, caracterizada por dos parámetros k1 y k2, cuyos valores dependen de la concentración en el inicio de la reacción. Se muestran ecuaciones de regresión que expresan los parámetros k1 y k2 en términos de la concentración inicial para los casos de agua superficial tratada en planta potabilizadora y agua subterránea clorada, válidas para el sitio de medición. El valor de k1 es positivo y disminuye ligeramente con el incremento de la concentración inicial. El valor de k2 es negativo para concentraciones iniciales medianas y altas (mayores de 80 mg/I), y positivo para las concentraciones iniciales menores. La magnitud de k1/k2 muestra una tendencia estable, disminuyendo ligeramente (en valor absoluto) con el incremento de la concentración inicial. La tasa de decaimiento del cloro es marcadamente más alta cuando la concentración inicial es baja. La ecuación cinética obtenida puede ser usada en modelos matemáticos de la calidad del agua en redes de distribución, calibrando los coeficientes k1 y k2 por mediciones de campo similares a las presentadas.
Calidad del agua Redes de agua potable Decaimiento del cloro Modelos matemáticos INGENIERÍA Y TECNOLOGÍA
Algorithmic differentiation of linear mixed models with variance-covariance structures
Fernando Henrique Toledo Jose Crossa Juan Burgueño Keith Gardner Rosa Angela Pacheco Gil (2023, [Objeto de congreso])
CIENCIAS AGROPECUARIAS Y BIOTECNOLOGÍA MATHEMATICAL MODELS ALGORITHMS LINEAR MODELS
Junjie Fu XUECAI ZHANG (2023, [Artículo])
Genomic Prediction Prediction Model Genetic Effects Hybrid Performance CIENCIAS AGROPECUARIAS Y BIOTECNOLOGÍA MAIZE GENETICS HYBRIDS PERFORMANCE ASSESSMENT
Structural analysis evaluationfor rollers of chassis dynoUsing finite element software
Jesús Emmanuel López Rizo ALFREDO CHAVEZ LUNA JAIME GONZALO SANTANA ESQUIVEL (2023, [Artículo])
This paper discusses the design considerations for a chassis dynamometer, focused on the rollers system used for measuring the power and torque of a vehicle in a university-level workshop. The design must prioritize factors such as safety, ease of use, adaptability to diverse types of vehicles, and the inclusion of safety systems to protect students and the vehicle. The work suggests adaptative features for the design, such as an adjustable fastening system and a compact and portable design, to adapt the structure into a university laboratory. The study also describes common methods for measuring engine power and torque using a chassis dynamometer, and the accurate and reliable measurement systems used for this purpose. This concludes with a discussion of the manufacturing methods used for the chassis dynamometer and a static analysis of the maximum effort capacity in each roller using Von Mises and Goodman fatigue theories. Developing a chassis dynamometer, in accordance the current patents available for workshop practices in a university is essential for providing students with comprehensive training.
Chassis dynamometer Conceptual design Finite element software Power and torque measurement Structural analysis INGENIERÍA Y TECNOLOGÍA CIENCIAS TECNOLÓGICAS OTRAS ESPECIALIDADES TECNOLÓGICAS OTRAS OTRAS
Do provisioning ecosystem services change along gradients of increasing agricultural production?
Ronju Ahammad Stephanie Tomscha Sarah Gergel Frédéric Baudron Jean-Yves Duriaux Chavarría Samson Foli Dominic Rowland Josh Van Vianen Terence Sunderland (2024, [Artículo])
Context: Increasing agricultural production shapes the flow of ecosystem services (ES), including provisioning services that support the livelihoods and nutrition of people in tropical developing countries. Although our broad understanding of the social-ecological consequences of agricultural intensification is growing, how it impacts provisioning ES is still unknown. Objectives: We examined the household use of provisioning ES across a gradient of increasing agricultural production in seven tropical countries (Bangladesh, Burkina Faso, Cameroon, Ethiopia, Indonesia, Nicaragua and Zambia). We answered two overarching questions: (1) does the use of provisioning ES differ along gradients of agriculture production ranging from zones of subsistence to moderate and to high agriculture production? and (2) are there synergies and/or trade-offs within and among groups of ES within these zones? Methods: Using structured surveys, we asked 1900 households about their assets, livestock, crops, and collection of forest products. These questions allowed us to assess the number of provisioning ES households used, and whether the ES used are functionally substitutable (i.e., used similarly for nutrition, material, and energy). Finally, we explored synergies and trade-offs among household use of provisioning ES. Results: As agricultural production increased, provisioning ES declined both in total number and in different functional groups used. We found more severe decreases in ES for relatively poorer households. Within the functional groups of ES, synergistic relationships were more often found than trade-offs in all zones, including significant synergies among livestock products (dairy, eggs, meat) and fruits. Conclusions: Considering landscape context provides opportunities to enhance synergies among provisioning services for households, supporting resilient food systems and human well-being.
Agricultural Production Zones Agricultural Intensifcation Synergies and Trade-Offs Landscape Multifunctionality Social-Ecological Systems CIENCIAS AGROPECUARIAS Y BIOTECNOLOGÍA AGRICULTURE INTENSIFICATION ECOSYSTEM SERVICES LANDSCAPE SOCIAL-ECOLOGICAL RESILIENCE ECOSYSTEM SERVICES
Impact of automation on enhancing energy quality in grid-connected photovoltaic systems
Virgilio Alfonso Murillo Rodríguez NOE VILLA VILLASEÑOR José Manuel Robles Solís OA Guirette-Barbosa (2023, [Artículo])
Rapid growth in the integration of new consumers into the electricity sector, particularly in the industrial sector, has necessitated better control of the electricity supply and of the users’ op-erating conditions to guarantee an adequate quality of service as well as the unregulated dis-turbances that have been generated in the electrical network that can cause significant failures, breakdowns and interruptions, causing considerable expenses and economic losses. This research examines the characteristics of electrical variations in equipment within a company in the industrial sector, analyzes the impact generated within the electrical system according to the need for operation in manufacturing systems, and proposes a new solution through automation of the regulation elements to maintain an optimal system quality and prevent damage and equipment failures while offering a cost-effective model. The proposed solution is evaluated through a reliable simulation in ETAP (Energy Systems Modeling, Analysis and Optimization) software, which emulates the interaction of control elements and simulates the design of electric flow equipment operation. The results demonstrate an improvement in system performance in the presence of disturbances when two automation schemes are applied as well as the exclusive operation of the capacitor bank, which improves the total system current fluctuations and improves the power factor from 85.83% to 93.42%. Such a scheme also improves the waveform in the main power system; another improvement result is when simultaneously operating the voltage and current filter together with the PV system, further improving the current fluctuations, improving the power factor from 85.83% to 94.81%, achieving better stability and improving the quality of the waveform in the main power grid.
This article belongs to Special Issue Advances and Optimization of Electric Energy System.
Power quality Capacitor bank Voltage and current filter Photovoltaic system INGENIERÍA Y TECNOLOGÍA CIENCIAS TECNOLÓGICAS OTRAS ESPECIALIDADES TECNOLÓGICAS OTRAS OTRAS
Alma Karla Buyoli Saavedra (2024, [Tesis de maestría])
179 páginas. Maestría en Diseño y Desarrollo de Productos
En la actualidad, la ansiedad representa uno de los mayores y más silenciosos problemas de la sociedad. Del mismo modo, las infancias y las adolescencias son una población que se ve afectada en gran medida por estos trastornos. En definitiva, estas es una población con una problemática apremiante de considerar, observar y trabajar. Por tal razón, resulta fundamental generar herramientas y estrategias que permitan a niños, niñas y adolescentes identificar y regular sus emociones de manera efectiva. Aprender a identificar las emociones es algo de suma importancia no solo dentro del proceso terapéutico, sino en la vida diaria del infante. En primer lugar, el hecho de reconocer y expresar emociones contribuye a canalizar la ansiedad. De igual forma, esto les ayuda a aprender a enfrentar los problemas de la vida diaria de una manera adecuada; por lo tanto, lo anterior se estima como un beneficio no solo en la infancia, sino también en la edad adulta. Asimismo, un correcto manejo emocional les permite incrementar la percepción de control sobre los sucesos que viven. Igualmente, esto refuerza su habilidad para empatizar, resolver conflictos y llegar a acuerdos, lo que mejora su forma de relacionarse con otras personas. En suma, son diferentes beneficios que se otorgarían al infante al aprender a conocer, identificar y expresar sus emociones. No obstante, estas aportaciones pueden ser mayores si se realizan a través de elementos lúdicos. Para empezar, la recreación es una acción nata y cotidiana en los infantes. El uso de fantasía, el juego simbólico y la imaginación son actividades naturales del desarrollo en el juego de los infantes (Schaefer, 2012). De igual manera, cuando las y los menores juegan, aprenden a tolerar la frustración, a regular sus emociones y a destacar en una tarea que es innata (Schaefer, 2012). En esa medida, el juego es quizá el medio más poderoso y apropiado para el desarrollo en el cual las y los menores pueden construir relaciones con los adultos, desarrollar el pensamiento causal, procesar las experiencias estresantes y aprender habilidades sociales (Chaloner, 2001). Por tal motivo, la propuesta para apoyar el proceso terapéutico se efectúa por medio de elementos lúdicos que permitan a los infantes identificar y expresar emociones a través del juego. Por tal motivo el objetivo de este trabajo es diseñar elementos lúdicos que apoyen a los niños de 6 a 8 años diagnosticados con ansiedad que se encuentren en tratamiento psicológico de la teoría cognitivo-conductual en la CDMX y área metropolitana con el fin de que puedan conocer, identificar y expresar sus emociones.
Games--Design and construction. Child psychotherapy. Play therapy. Games--Therapeutic use. Ansiedad en niños. Terapia de juego. Psicoterapia infantil. GV1230 HUMANIDADES Y CIENCIAS DE LA CONDUCTA CIENCIAS DE LAS ARTES Y LAS LETRAS TEORÍA, ANÁLISIS Y CRÍTICA DE LAS BELLAS ARTES