Búsqueda avanzada


Área de conocimiento




42 resultados, página 2 de 5

Análisis preventivos de variables para la industria cerámica con base en la metodología de análisis a modo y efecto de falla (FMEA method)

Preventive analysis of variables for the ceramic industry based on the failure mode and effect analysis (FMEA method)

Rigel Hugo Carreón Reyes Juan Carlos Neri Guzmán (2023, [Artículo])

El presente estudio indica de una forma tangible la aplicación de la herramienta FMEA (Failure Mode And Effects Analysis -por sus siglas en inglés) en la aplicación de fabricación de cerámica sanitaria, en donde se evalúan las variables que están relacionadas con el proceso de diseño, procesamiento de piezas cerámicas y de su relación existente para poder alcanzar los requisitos normativos y que estos a su vez sean alcanzables. Dentro del estudio se presenta el análisis y elaboración de la matriz riesgos en modo de fallas, así como una serie de definiciones estadísticas con las cuales son evaluados los procesos de fabricación, así como la explicación clara de la metodología FMEA en donde se indica la adecuación de estos conceptos a este tipo de manufacturas (cerámica sanitaria). Este trabajo también describe a través del estudio de caso de las variables una metodología que detalla los conceptos básicos tales como severidad, detección y ocurrencia combinando el desarrollo de tablas parametrizadas y / o acopladas al tipo de proceso de manufactura cerámica .En los resultados que se obtienen se observa la disminución de la incertidumbre hasta de 85% en los valores de RPN y una mejora en el cpk >1,33 como índice de calidad los riesgos o incertidumbres disminuidos son de forma numérica a través de la comprobación de nuevas acciones y el reanálisis de los conceptos de ocurrencia y detección derivados de la implementación de acciones. Las conclusiones indican como una herramienta adecuada el uso de FMEA para el campo de aplicación de la manufactura de cerámica sanitaria.

The present study indicates in a tangible way the application of the FMEA tool (Failure Mode and Effects Analysis) in the application of sanitary ceramic manufacturing, where the variables that are related to the process of design, processing of ceramic pieces and their existing relationship are evaluated in order to achieve the regulatory requirements and that these in turn are achievable. The study presents the analysis and elaboration of the risk matrix in failure mode as well as a series of statistical definitions with which the manufacturing processes are evaluated as well as the clear explanation of the FMEA methodology (failure mode and effects analysis) where the application and adequacy of these concepts to this type of manufactures (sanitary ceramics) is indicated. This paper also describes through the case study of the variables a methodology that details the basic concepts such as severity, detection and occurrence combining the development of parameterized tables and / or coupled to the type of ceramic manufacturing process. In the results obtained, the decrease in uncertainty of until 85% in the values of RPN and an improvement in the cpk >1.33 as a quality index, the risks or uncertainties decreased are numerically through the verification of new actions and the reanalysis of the concepts of occurrence and detection derived from the implementation of actions. The conclusions indicate as an appropriate tool the use of FMEA for the field of application of the manufacture of sanitary ceramics.

AMEF (Análisis de Modo de Efecto y Falla) Productos cerámicos Cerámica sanitaria Procesos cerámicos Severidad Detección Ocurrencia FMEA (Failure Mode and Effects Analysis) Ceramic products Standard ASME Sanitary ceramic Ceramic processess INGENIERÍA Y TECNOLOGÍA CIENCIAS TECNOLÓGICAS OTRAS ESPECIALIDADES TECNOLÓGICAS OTRAS OTRAS

Capacitación en el programa "Del conflicto potencial al potencial de cooperación" del Programa Hidrológico Internacional de la UNESCO

Rita Vázquez del Mercado Arribas Javier Lambarri Beléndez Rosalinda Uribe Gemma Millán DENISE SOARES ROBERTO ROMERO PEREZ MARÍA ELENA RIVERO BUSTOS (2012, [Documento de trabajo])

Se presentan las acciones tomadas para alcanzar los siguientes objetivos: 1) capacitar a siete especialistas del IMTA en el programa "Del conflicto potencial al potencial de cooperación"; 2) sistematizar la información hemerográfica y documental sobre cuatro casos de conflictos hídricos en México; 3) elaborar material didáctico sobre análisis y caracterización de conflictos hídricos; y 4) organizar un taller de análisis y caracterización de conflictos hídricos en México.

Conflictos por agua Solución de conflictos Capacitación Informes de proyectos CIENCIAS SOCIALES

Creative problem solving as teaching competence, the discourse of teachers

EFRAIN DUARTE BRICEÑO MARíA TERESA DíAZ-MOHEDO (2017, [Artículo])

La importancia del fomento de la solución creativa de problemas en educación superior es cada vez más reconocida; y asimismo, los beneficios que aporta van siendo progresivamente valorados, así como su papel clave en la era de la información. A pesar de esto, es muy poca la investigación que existe sobre la solución creativa de problemas como competencia docente. Se entrevistó a 12 docentes mexicanos y los datos fueron sometidos a un análisis de contenido con un enfoque cualitativo, con el objetivo de examinar su perspectiva sobre la importancia del uso de la solución creativa de problemas en educación superior. Los resultados muestran que los profesores consideran la solución creativa de problemas muy importante por su vinculación con la producción de conocimiento desde una perspectiva innovadora y por la conexión existente entre el empleo de estrategias creativas y la motivación del alumnado. Se hacen diferentes propuestas para promover su uso en las instituciones de educación superior.

HUMANIDADES Y CIENCIAS DE LA CONDUCTA Solución creativa de problemas Pensamiento creativo Competencias docentes Educación superior Investigación educativa

Sustainability evaluation of contrasting milpa systems in the Yucatán Peninsula, Mexico

Santiago Lopez-Ridaura Tania Carolina Camacho Villa (2023, [Artículo])

The milpa agroecosystem is an intercropping of maize, beans, squash and other crops, developed in Mesoamerica, and its adoption is widely variable across climates and regions. An example of particular interest is the Yucatan Peninsula in Mexico, which holds highly diverse milpas, drawing on ancestral Mayan knowledge. Traditional milpas have been described as sustainable resource management models, based on long rotations within a slash-and-burn cycle in forest areas. Nevertheless, due to modernization and intensification processes, new variants of the approach have appeared. The objective of this study was to evaluate the sustainability of three milpa systems (traditional, continuous, and mechanized) in four case studies across the Peninsula, with emphasis on food self-sufficiency, social inclusion and adoption of innovations promoted by a development project. The Framework for the Evaluation of Agroecosystems using Indicators (MESMIS, for its Spanish acronym) was used for its flexible, participatory approach. A common group of indicators was developed despite regional differences between study cases, with a high level of farmer participation throughout the iterative process. The results show lower crop yields in traditional systems, but with lower inputs costs and pesticide use. In contrast, continuous milpas had higher value in terms of crop diversity, food security, social inclusion, and innovation adoption. Mechanized milpas had lower weed control costs. Profitability of cash crops and the proportion of forest were high in all systems. Highly adopted innovations across milpa types and study cases included spatial crop arrangement and the use of residues as mulches. However, most innovations are not adapted to local conditions, and do not address climate change. Further, women and youth participation is low, especially in traditional systems.

Milpa Intensification Processes Women and Youth Participation CIENCIAS AGROPECUARIAS Y BIOTECNOLOGÍA SUSTAINABILITY INTERCROPPING FOOD SECURITY INNOVATION SOCIAL INCLUSION AGROECOSYSTEMS CASE STUDIES

Validación del uso de energía renovable para su aplicación en el subsector agrícola

JOSE JASSON FLORES PRIETO Olga Xochitl Cisneros Estrada (2013, [Documento de trabajo])

Desarrollo tecnológico para la desalación de agua salobre con generación híbrida de paneles solares y aerogeneradores – Sistema de bombeo solar para riego presurizado – Sistema de desalación solar por nanofiltración – Referencias bibliográficas.

Energía solar Tecnología apropiada Desalación Nanofiltración Riego Informes de proyectos INGENIERÍA Y TECNOLOGÍA

Predicción fenológica del cultivo de papa mediante tiempo térmico

Phenological prediction of potato crop by means of thermal time

Hector Flores Magdaleno HILARIO FLORES GALLARDO WALDO OJEDA BUSTAMANTE (2014, [Artículo])

El objetivo del presente estudio fue evaluar tres métodos para predecir la fenología en el cultivo de papa (Solanum tuberosum L.) mediante tiempo térmico, para lo cual se trabajó con un total de 15 parcelas a nivel comercial sembradas con la variedad ‘Alpha’ en el norte de Sinaloa, México. Los métodos comparados fueron: temperatura media, grados día (°D) y días fenológicos de papa (P-days), los tres calculados con los datos obtenidos mediante el monitoreo en campo de cada fase fenológica durante los ciclos agrícolas otoño-invierno 2005-2006 y 2006-2007. Los resultados indicaron que el mejor método para predecir la fenología de esta variedad de papa con base en el tiempo térmico fue el P-days, porque presentó los menores valores de coeficiente de variación con 0.07 y de desviación estándar con 18.03 para todas las etapas fenológicas analizadas.

The objective of this research was to evaluate three methods to predict potato crop (Solanum tuberosum L.) phenology by means of thermal time, which were applied on 15 commercial plots sowed with the variety ‘Alpha’ in northern Sinaloa, México. The compared methods were: average temperature, degree days (°D) and potato days (P-days), all of them calculated with data obtained by field monitoring of each phenological stage during two crop seasons, Autumn-Winter seasons 2005-2006 and 2006-2007. Results showed that the best method to predict the phenology of this potato variety by means of thermal time was the P-days technique because it produced the lowest values of variation coefficient with 0.07 and of standard deviation with 18.03, for all the analyzed phenology stages. To compare the errors in thermal requirements obtained with each method in the plots, other plots were used for validation, and so it was confirmed that the P-days method showed the smallest errors, with 3.6 and 3.2 % for the root mean square error RMSE and the mean absolute error MAE, respectively.

Solanum tuberosum Cultivos alimenticios Variabilidad climática INGENIERÍA Y TECNOLOGÍA

Desalinización de agua subterránea salobre mediante energía solar para aplicaciones de riego agrícola en zonas rurales

ULISES DEHESA CARRASCO José Javier Ramírez Luna Pedro Rivera Ruiz Eduardo Venegas Reyes (2019, [Documento de trabajo])

RD1718.6

El objetivo del presente proyecto se enfoca en el estudio de la factibilidad del uso de la nanofiltración u osmosis inversa de baja presión, alimentada con energía solar fotovoltaica para el tratamiento de agua subterránea salobre destinada al riego agrícola en zonas rurales del estado de Zacatecas, México, donde la salinidad de los mantos acuíferos sub-superficiales limita las actividades agrícolas.

Riego Desalación Nanofiltración Ósmosis inversa Energía solar Estudios de factibilidad INGENIERÍA Y TECNOLOGÍA

Evaluation of sunlight and humidity protection of a bioherbicide for Eichornia crassipes biocontrol

MARICELA MARTINEZ JIMENEZ MARIA ANTONIETA GOMEZ BALANDRA MARIA DEL PILAR SALDAÑA FABELA (2015, [Artículo])

C. piaropi (Cercospora piaropi) and A. zonatum (Acremonium zonatum) have proved to be effective in reducing water hyacinth growth. However, efficacy of these fungi in field is limited by the effect of solar UV (ultraviolet) light and desiccation. In this study, three compounds used as sunscreens and one seed plant that produce mucilage were tested for their effects on the infection produced by C. piaropi and A. zonatum inoculum under laboratory and field conditions. In laboratory conditions, TiO2 (titanium dioxide) and metamucil did not inhibit C. piaropi and A. zonatum viability. Moreover, the addition of TiO2 and metamucil to the inoculum suspension increased fungi infection. The protective effect of TiO2 and metamucil was more evident when the inoculum suspension was applied 4 h before sunset. These results suggest that addition of TiO2 and metamucil provides necessary humidity and solar protection for increasing C. piaropi and A. zonatum infection on water hyacinth plants.

Lirios acuáticos Radiación solar Dióxido de titanio C. piaropi A. zonatum BIOLOGÍA Y QUÍMICA