Síncrono / asíncrono. Convergencia y alternancia en la enseñanza futura del diseño

Francisco Gerardo Toledo Ramirez (2023, [Capítulo de libro])

La cuarentena sanitaria de los últimos dos años (COVID-19) obligó a “rediseñar”, “digitalizar” o “virtualizar” nuestros cursos y estilos de enseñanza en tiempo récord para “adaptarlas” al “formato virtual a distancia” (online). La profusión de comillas en las líneas anteriores tiene la intención de señalar el carácter incierto o erróneo que ciertos términos-fetiche adquirieron en el proceso. Es importante desmitificar esas figuras de la expresión que se elevaron casi al nivel de pseudo-epistemes (presuntamente novedosas) para la enseñanza del Diseño. Ese tema lo abordo con mayor amplitud en una nueva investigación, recientemente registrada en la UAM. En este texto esbozo (en forma algo lúdica) pero seria y breve a la vez, la conveniencia de tal desmitificación y avanzo en el delineamiento de un modelo de la alternancia y convergencia de recursos pedagógico-didácticos síncronos y asíncronos, mediante la tecnología-red digital, como un elemento estratégico para la educación futura en Diseño.

The health quarantine of the last 2 years (COVID-19) forced us to “redesign”, “digitize” or “virtualize” our courses and teaching styles in record time to “adapt” them to the “virtual format” “at a distance” (online). The profusion of quotation marks in the previous lines is intended to indicate the uncertain or erroneous character that certain fetish-terms acquired in the process. It is important to demystify those figures of expression that have risen almost to the level of pseudo-epistemes (presumably novel) for teaching design. I address this topic more fully in a new investigation, recently registered at the UAM. In this text I outline (in a somewhat playful way) but serious and brief at the same time, the convenience of such “demystification” and I advance in the outline of a model of alternation and convergence of synchronous and asynchronous pedagogical-didactic resources, through technology. -digital network, as a strategic element for future design education.

Síncrono, asíncrono, virtualidad, presencialidad, diseño, remoto. Synchronous, asynchronous, virtuality, face-to-face, design, remote. Design--Study and teaching, Higher. Distance education. Blended learning. Universidad Autónoma Metropolitana. Unidad Azcapotzalco. División de Ciencias y Artes para el Diseño. Artes gráficas. Educación a Distancia. Aprendizaje combinado. NK1170 HUMANIDADES Y CIENCIAS DE LA CONDUCTA CIENCIAS DE LAS ARTES Y LAS LETRAS

Dipole-wind interactions under gap wind jet conditions in the Gulf of Tehuantepec, Mexico: A surface drifter and satellite database analysis

MAURO WILFRIDO SANTIAGO GARCIA (2019, [Artículo])

Gap wind jets (Tehuano winds) trigger supersquirts of colder water and mesoscale asymmetric dipoles in the Gulf of Tehuantepec (GT). However, the effects of successive gap wind jets on dipoles and their effects inside eddies have not yet been studied. Based on the wind fields, geostrophic currents, and surface drifter dispersion, this research documented three dipoles triggered and modified by Tehuano winds. Once a dipole develops, successive gap wind jets strengthen the vortices, and the anticyclonic eddy migrates southwestward while the cyclonic eddy is maintained on the east side of the GT. During the wind relaxation stage, the cyclonic eddy may propagate westward, but due to the subsequent re-intensification of the Tehuano winds, the vortex could break down, as was suggested by surface drifter dispersion pattern and geostrophic field data. The effect of the Tehuano winds was evaluating via eddy-Ekman pumping. Under Tehuano wind conditions, Ekman downwelling (upwelling) inside the anticyclonic (cyclonic) eddies may reach ~ -2.0 (0.5) m d-1 and decrease as the wind weakens. In the absence of Tehuano winds, Ekman downwelling inside the anticyclonic eddy was ~ 0.1 (-0.1) m d-1. The asymmetry of downwelling and upwelling inside eddies during Tehuano wind events may be associated with Tehuano wind forcing. © 2019 Santiago-García et al. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.

article, dipole, leisure, Mexico, cold, ecosystem, factual database, geographic mapping, hurricane, Mexico, satellite imagery, season, water flow, wind, sea water, Cold Temperature, Cyclonic Storms, Databases, Factual, Ecosystem, Geographic Mapping, CIENCIAS FÍSICO MATEMÁTICAS Y CIENCIAS DE LA TIERRA CIENCIAS DE LA TIERRA Y DEL ESPACIO OCEANOGRAFÍA OCEANOGRAFÍA

Usando la descomposición de un grafo Halin para el diseño de algoritmos autoestabilizantes

Using Halin graph decomposition for the design of self-stabilizing algorithm

Daniel Uriel Orozco Lomelí (2023, [Tesis de maestría])

Sea G = (V, E) un grafo no dirigido. El problema de encontrar un conjunto independiente fuerte en G, es identificar un conjunto S ⊆ V , tal que dados dos vértices arbitrarios de S, éstos estén separados entre sí por el menos tres aristas. Encontrar un conjunto S de tamaño máximo pertenece a la clase NP-Difícil. Por otro lado, el problema de encontrar un conjunto dominante total en G es identificar un conjunto D ⊆ V , tal que cualquier vértice en V tenga al menos un vecino que pertenezca a D. Encontrar un conjunto D de tamaño mínimo también pertenece a la clase NP-Difícil. En este trabajo de tesis se diseñaron dos algoritmos, uno que resuelve el problema de encontrar un conjunto independiente fuerte maximal y otro que resuelve el problema de encontrar un conjunto dominante total minimal. Estos dos problemas son menos restrictivos que las versiones de optimización descritas al principio de este texto y se sabe que pertenecen a la clase P. Los algoritmos diseñados corren en un sistema distribuido, son autoestabilizantes, son tolerantes a fallas transitorias y funcionan para grafos Halin. Los grafos Halin pertenecen a la clase de grafos 2-outerplanares y tienen la propiedad de que se pueden partir en dos subgrafos muy conocidos, un árbol y un ciclo. Los algoritmos propuestos aprovechan la propiedad anterior para disminuir la complejidad de los mismos. Hasta donde tenemos conocimiento, los algoritmos propuestos, que corren en tiempo lineal en el número de vértices, son los algoritmos más rápidos existentes para los problemas del conjunto independiente fuerte maximal y el conjunto dominante total minimal.

Let G = (V, E) be an undirected graph. The problem of finding a strong stable set in G, is to identify a set S ⊆ V , such that given two arbitrary vertices of S, they are separated from each other by at least three edges. Finding a set S of maximum size belongs to the class NP-Hard. On the other hand, the problem of finding a total dominanting set in G is to identify a set D ⊆ V , such that any vertex in V has at least one neighbor belonging to D. Finding a set D of minimum size also belongs to the class NP-Hard. In this thesis work, two algorithms were designed, one that solves the problem of finding a maximal strong stable set and one that solves the problem of finding a minimal total dominanting set. These two problems are less restrictive than the optimization versions described at the beginning of this text and are known to belong to the P class. The designed algorithms run on a distributed system, are self-stabilizing, are transient fault tolerant, and work for Halin graphs. Halin graphs belong to the 2-outerplanar class of graphs and have the property that they can be split into two well-known subgraphs, a tree and a cycle. The proposed algorithms take advantage of the above property to decrease the complexity of the algorithms. To the best of our knowledge, the proposed algorithms, which run in linear time in the number of vertices, are the fastest existing algorithms for the maximal strong stable set and minimal total dominating set problems.

Grafo Halin, Sistemas Distribuidos, Autoestabilización, Conjunto Independiente Fuerte, Conjunto Dominante Total Halin Graph, Distributed Systems, Self-stabilizing, Strong Stable Set, Total Dominating Set INGENIERÍA Y TECNOLOGÍA CIENCIAS TECNOLÓGICAS TECNOLOGÍA DE LOS ORDENADORES LENGUAJES ALGORÍTMICOS LENGUAJES ALGORÍTMICOS

Modelado y acoplamiento de la conductividad eléctrica e hidráulica a partir de tomografía de rocas

Modeling and coupling of electrical and hydraulic conductivity from rock tomography

Miguel Ángel Martínez Rodríguez (2022, [Tesis de maestría])

En este trabajo se emplearon técnicas de modelado numérico para simular el flujo de corriente eléctrica y de fluido a través de medios porosos con el fin de determinar el factor de resistividad y la permeabilidad, así como la distribución de los campos de densidad de corriente eléctrica y velocidad de flujo. Para el modelado de flujo eléctrico se desarrolló un algoritmo basado en diferencias finitas, mientras que para el modelado hidráulico se empleó una librería reportada en la literatura, basada en el método de redes de Boltzmann. En ambos esquemas de modelado se establecieron condiciones en la frontera poro-grano para modelar los procesos físicos exclusivamente en el espacio poroso. Los valores estimados de factor de resistividad y de permeabilidad, así como la porosidad, se emplearon para estudiar las correlaciones entre estas propiedades a través de relaciones petrofísicas. Para esto, se propuso una expresión que relaciona la permeabilidad y la porosidad y, empleando una relación existente entre el factor de resistividad y la porosidad, se propuso también una relación directa entre la permeabilidad y el factor de resistividad. Las relaciones propuestas fueron aplicadas a los valores numéricos obtenidos para paquetes de esferas generados numéricamente y se encontró que se ajustan mejor a los datos en comparación con las relaciones más comúnmente utilizadas, especialmente para porosidades altas. Se mostró también que estas relaciones petrofísicas toman la forma de las relaciones más comunes conocidas cuando se trata con porosidades bajas. Valores obtenidos de imágenes digitales de un paquete de esferas sintético y una muestra de dolomita mostraron que las expresiones para porosidades bajas son suficientes para ajustar datos de medios porosos con porosidades menores a un valor entre 0.3 y 0.4. Finalmente, se analizaron el factor de resistividad, la permeabilidad, las relaciones petrofísicas, y las distribuciones espaciales y estadísticas de los campos vectoriales de flujo se analizaron para comparar los fenómenos de transporte eléctrico e hidráulico, encontrando que algunos factores, como la porosidad efectiva, son importantes en ambos fenómenos de flujo; mientras que otros, como la adherencia del fluido a las paredes del poro, son particularmente relevantes para el flujo hidráulico.

In this work, numerical modeling techniques were used to simulate the flow of electric current and fluid through porous media in order to determine the resistivity factor and permeability, as well as the distribution of electric current density and flow velocity fields. For electric flow modeling, an algorithm based on finite differences was developed, while for hydraulic modeling, a library reported in the literature, based on lattice Boltzmann method, was used. In both modeling schemes, pore-grain boundary conditions were established to model the physical processes exclusively in the pore space. The estimated values of resistivity factor and permeability, as well as porosity, were used to study the correlations between these properties through petrophysical relationships. An expression relating permeability and porosity was proposed and, using an existing relationship between the resistivity factor and the porosity, a direct relation between permeability and resistivity factor was also proposed. The proposed relations were applied to data obtained for numerically generated sphere packs and were found to fit the data better than the most commonly used relationships, especially for high porosities. It was also shown that these petrophysical relationships take the form of the most common relationships known when dealing with low porosities. Modeling data on digital images of a synthetic sphere pack and a dolomite sample showed that the expressions for low porosities are sufficient to fit data from porous media with porosities lower than 0.3 to 0.4. Finally, resistivity factors, permeabilities, petrophysical relationships, and spatial and statistical distributions of flow vector fields were analyzed to compare electrical and hydraulic transport phenomena, finding that some factors, such as the effective porosity, are important in both flow phenomena; whereas some other, such as the pore-wall adherence, are particularly relevant to hidraulic flux.

Física de rocas, modelado numérico, relaciones petrofísicas, fenómenos de transporte, factor de resistividad, permeabilidad, porosidad, tomografía de rocas, campos vectoriales, distribución estadística Rock physics, numerical modelling, petrophysical relations, transport phenomena, resistivity factor, permeability, porosity, rock tomography, vector fields, statistical distribution CIENCIAS FÍSICO MATEMÁTICAS Y CIENCIAS DE LA TIERRA CIENCIAS DE LA TIERRA Y DEL ESPACIO GEOFÍSICA GEOFÍSICA DE LA MASA SÓLIDA TERRESTRE GEOFÍSICA DE LA MASA SÓLIDA TERRESTRE

Chronic toxicity of shrimp feed added with silver nanoparticles (Argovit-4®) in Litopenaeus vannamei and immune response to white spot syndrome virus infection

Carlos Rosendo Romo Quiñonez Píndaro Álvarez Ruiz CLAUDIO HUMBERTO MEJIA RUIZ NINA BOGDANCHIKOVA Alexey Pestryakov CARINA GAMEZ JIMENEZ WENCESLAO VALENZUELA QUIÑONEZ Magnolia Montoya Mejía EUSEBIO NAVA PEREZ (2022, [Artículo])

"In recent years, the application of silver nanoparticles (AgNPs) as antibacterial compounds has been widely used in human and veterinary medicine. In this work, we investigated the effects of AgNPs (Argovit-4 R ) as feed additives (feed-AgNPs) on shrimp (Litopenaeus vannamei) using three different methods: 1) chronic toxicity after 28 days of feeding, 2) Effects against white spot syndrome virus (WSSV) challenged by oral route, and 3) transcriptional responses of immune-related genes (PAP, ProPO, CTL-3, Crustin, PEN3, and PEN4) following WSSV infection. The results showed that the feed-AgNPs did not interfere with the growth and survival of shrimp. Also, mild lesions in the hepatopancreas were recorded, proportional to the frequency of the feed-AgNP supply. Challenge test versus WSSV showed that feeding every 7 days with feed-AgNPs reduced mortality, reaching a survival rate of 53%, compared to the survival rates observed in groups fed every 4 days, daily and control groups of feed-AgNPs for the 30%, 10%, and 7% groups, respectively. Feed-AgNPs negatively regulated the expression of PAP, ProPO, and Crustin genes after 28 days of treatment and altered the transcriptional responses of PAP, ProPO, CTL-3, and Crustin after WSSV exposure. The results showed that weekly feeding-AgNPs could partially prevent WSSV infection in shrimp culture. However, whether or not transcriptional responses against pathogens are advantageous remains to be elucidated."

Silver nanoparticles, Shrimp, Aquaculture, Chronic toxicity, WSSV, AgNP, Argovit, Litopenaeus vannamei , Silver fed, White spot syndrome virus BIOLOGÍA Y QUÍMICA CIENCIAS DE LA VIDA INMUNOLOGÍA INMUNIZACIÓN INMUNIZACIÓN

Hábitos alimenticios y aportación nutricional de la dieta de Paralichthys californicus, en la Bahía de Todos Santos y estero de Punta Banda, Ensenada, B.C

María Idalia Sandoval Muy (1995, [Tesis de maestría])

Se analizaron 289 estómagos para describir la dieta de Paralichthys californicus en la Bahía de Todos Santos y el Estero de Punta Banda (junio de 1992 a marzo de 1993), realizando una separación por área y estación (invierno y verano). Se determinó realizar la descripción de la dieta a nivel de grupos presa para categorizar las presas ingeridas, y se emplearon los índices de porciento numérico, de peso, de frecuencia de ocurrencia, y el Índice de Importancia Relativa (IIR). Los organismos de la bahía presentaron mayor talla promedio (154.2 ±D.E.37.2mm) que los colectados en el estero (107.9 ±36.85mm), la cual fue diferente (K-W, p<0.001) tanto entre las dos áreas como entre invierno y verano de cada zona. En ambos lugares los organismos de menor talla se encontraron en invierno. Se identificaron cuatro presas a nivel familia, ocho a nivel género, y 15 a nivel especie. Los principales componentes de la dieta en la bahía durante invierno, fueron mysidos con 88.4% del I.I.R. (Metainysidopsis elongata, 62. l %), carideos (10%) y peces; en el verano el grupo más importante nuevamente fue mysidos (98.7%), y el resto gamáridos, carideos y peces. De las presas presentes en el estero, los peces fueron los más importantes (95.6%) en el invierno destacando góbidos (60.63%) y principalmente Ilypnus gilberti (30.5%); en el verano, varias especies de góbidos 31.68% y otras especies de peces (35.2%). Se encontraron diferencias (p<0.01) en el número de presas tanto entre las dos áreas como entre el invierno y el verano de ambos lugares. En el estero, se detectaron diferencias en el porcentaje de proteínas de los contenidos estomacales en los dos grupos de tallas y estaciones del año; un resultado similar fue para lípidos. Una estimación de las calorías con base en el contenido de lípidos y proteínas de las principales presas, indicó que el aporte calórico al depredador está en función del número y tipo de presa ingerida y no a la selección de las presas por el lenguado, esto puede reflejar la disponibilidad del alimento. Los valores de ración diaria fueron mayores para la bahía (0.22-0.24 Kcal/g) que para el estero (0.10-0.12 Kcal/g), y no se encontró un efecto del cambio de temperatura entre verano e invierno (Q10 <1.4) para ambos lugares.

A total of 289 stomachs were analyzed to describe the diet of Paralichthys californicus juveniles in Bahía de Todos Santos and Estero de Punta Banda, B.C., México (June 1992 to March 1993); after the collection, the stomachs were grouped in winter and summer seasons of each area. Diet was described to higher-1evel taxonomic categories based on the percent in number, wet weight, and frequency of occurrence and the prey importance by the Index of Relative Importance (IIR). Largest organisms (154.2± D.E.37.2mm SL) were found in the hay than those from the estuary (107.9±.36.85mm), with a significative difference between areas and between winter and summer of each site (K-W, <0.001) In both areas the minor size organisms were collected during winter. The lowest taxon identified as preys in both areas were four at family leve1, and eight to genus and 15 to species level. Mysids (IRI = 88.4%) with Metamysidopsis elongata (62.1 %), carideans (10.2%), and fishes were the most important food items in the bay during winter; in summer, the mysids (IRI = 98.4%, M. elongata, IRI = 35.3%), carideans (0.9%) and the fishes, again. ln the estuary (winter), the rnost important were the fishes (IRI = 95.6%) with members of the gobies (60.63%) mainly llypnus gilberti (30.5%); a small percent was provided by invertebrates (0.08%); in summer, the fishes (66.9%), gamarids (17%) and the mysids ( 13. 8%) domínate the diet. Significant differences was found in prey numbers between areas and between seasons of each site. In the estuary, differences in the protein content from stomachs of two groups size were found; these differences were detected between seasons, and similar results was detected in lipids. The calories values (based in lipid and protein content) from the main prey, indicate that the caloric contribution is a function of kind and prey numbers, more than the selection by the halibul, this may indicate the food disponibility. The daily ration in bay (0.22-0.24 Kcal/g) was greater than in the estuary (0.10-0.12), and no effect of the temperature change in summer and winter (Q10 <1.4) for both areas were found.

Lenguado de california,Paralichthys californicus,Bahía de Todos Santos,Estero de Punta Banda,Baja California,Ciencias del mar CIENCIAS AGROPECUARIAS Y BIOTECNOLOGÍA CIENCIAS AGRARIAS PECES Y FAUNA SILVESTRE PECES Y FAUNA SILVESTRE

Maintenance of Coastal Surface Blooms by Surface Temperature Stratification and Wind Drift

MARY CARMEN RUIZ DE LA TORRE (2013, [Artículo])

Algae blooms are an increasingly recurrent phenomenon of potentially socio-economic impact in coastal waters globally and in the coastal upwelling region off northern Baja California, Mexico. In coastal upwelling areas the diurnal wind pattern is directed towards the coast during the day. We regularly found positive Near Surface Temperature Stratification (NSTS), the resulting density stratification is expected to reduce the frictional coupling of the surface layer from deeper waters and allow for its more efficient wind transport. We propose that the net transport of the top layer of approximately 2.7 kilometers per day towards the coast helps maintain surface blooms of slow growing dinoflagellate such as Lingulodinium polyedrum. We measured: near surface stratification with a free-rising CTD profiler, trajectories of drifter buoys with attached thermographs, wind speed and direction, velocity profiles via an Acoustic Doppler Current Profiler, Chlorophyll and cell concentration from water samples and vertical migration using sediment traps. The ADCP and drifter data agree and show noticeable current shear within the first meters of the surface where temperature stratification and high cell densities of L. polyedrum were found during the day. Drifters with 1m depth drogue moved towards the shore, whereas drifters at 3 and 5 m depth showed trajectories parallel or away from shore. A small part of the surface population migrated down to the sea floor during night thus reducing horizontal dispersion. The persistent transport of the surface bloom population towards shore should help maintain the bloom in favorable environmental conditions with high nutrients, but also increasing the potential socioeconomic impact of the blooms. The coast wise transport is not limited to blooms but includes all dissolved and particulate constituents in surface waters. © 2013 Ruiz-de la Torre et al.

chlorophyll, algal bloom, article, cell count, cell density, coastal waters, controlled study, dinoflagellate, Lingulodinium polyedrum, meteorological phenomena, Mexico, near surface temperature stratification, nonhuman, nutrient concentration, popul CIENCIAS FÍSICO MATEMÁTICAS Y CIENCIAS DE LA TIERRA CIENCIAS DE LA TIERRA Y DEL ESPACIO OCEANOGRAFÍA OCEANOGRAFÍA

Control de sistemas usando aprendizaje de máquina

Systems control using machine learning

Jesús Martín Miguel Martínez (2023, [Tesis de maestría])

El aprendizaje por refuerzo es un paradigma del aprendizaje de máquina con un amplio desarrollo y una creciente demanda en aplicaciones que involucran toma de decisiones y control. Es un paradigma que permite el diseño de controladores que no dependen directamente del modelo que describe la dinámica del sistema. Esto es importante ya que en aplicaciones reales es frecuente que no se disponga de dichos modelos de manera precisa. Esta tesis tiene como objetivo implementar un controlador óptimo en tiempo discreto libre de modelo. La metodología elegida se basa en algoritmos de aprendizaje por refuerzo, enfocados en sistemas con espacios de estado y acción continuos a través de modelos discretos. Se utiliza el concepto de función de valor (Q-función y función V ) y la ecuación de Bellman para resolver el problema del regulador cuadrático lineal para un sistema mecánico masa-resorte-amortiguador, en casos donde se tiene conocimiento parcial y desconocimiento total del modelo. Para ambos casos las funciones de valor son definidas explícitamente por la estructura de un aproximador paramétrico, donde el vector de pesos del aproximador es sintonizado a través de un proceso iterativo de estimación de parámetros. Cuando se tiene conocimiento parcial de la dinámica se usa el método de aprendizaje por diferencias temporales en un entrenamiento episódico, que utiliza el esquema de mínimos cuadrados con mínimos cuadrados recursivos en la sintonización del crítico y descenso del gradiente en la sintonización del actor, el mejor resultado para este esquema es usando el algoritmo de iteración de valor para la solución de la ecuación de Bellman, con un resultado significativo en términos de precisión en comparación a los valores óptimos (función DLQR). Cuando se tiene desconocimiento de la dinámica se usa el algoritmo Q-learning en entrenamiento continuo, con el esquema de mínimos cuadrados con mínimos cuadrados recursivos y el esquema de mínimos cuadrados con descenso del gradiente. Ambos esquemas usan el algoritmo de iteración de política para la solución de la ecuación de Bellman, y se obtienen resultados de aproximadamente 0.001 en la medición del error cuadrático medio. Se realiza una prueba de adaptabilidad considerando variaciones que puedan suceder en los parámetros de la planta, siendo el esquema de mínimos cuadrados con mínimos cuadrados recursivos el que tiene los mejores resultados, reduciendo significativamente ...

Reinforcement learning is a machine learning paradigm with extensive development and growing demand in decision-making and control applications. This technique allows the design of controllers that do not directly depend on the model describing the system dynamics. It is useful in real-world applications, where accurate models are often unavailable. The objective of this work is to implement a modelfree discrete-time optimal controller. Through discrete models, we implemented reinforcement learning algorithms focused on systems with continuous state and action spaces. The concepts of value-function, Q-function, V -function, and the Bellman equation are employed to solve the linear quadratic regulator problem for a mass-spring-damper system in a partially known and utterly unknown model. For both cases, the value functions are explicitly defined by a parametric approximator’s structure, where the weight vector is tuned through an iterative parameter estimation process. When partial knowledge of the dynamics is available, the temporal difference learning method is used under episodic training, utilizing the least squares with a recursive least squares scheme for tuning the critic and gradient descent for the actor´s tuning. The best result for this scheme is achieved using the value iteration algorithm for solving the Bellman equation, yielding significant improvements in approximating the optimal values (DLQR function). When the dynamics are entirely unknown, the Q-learning algorithm is employed in continuous training, employing the least squares with recursive least squares and the gradient descent schemes. Both schemes use the policy iteration algorithm to solve the Bellman equation, and the system’s response using the obtained values was compared to the one using the theoretical optimal values, yielding approximately zero mean squared error between them. An adaptability test is conducted considering variations that may occur in plant parameters, with the least squares with recursive least squares scheme yielding the best results, significantly reducing the number of iterations required for convergence to optimal values.

aprendizaje por refuerzo, control óptimo, control adaptativo, sistemas mecánicos, libre de modelo, dinámica totalmente desconocida, aproximación paramétrica, Q-learning, iteración de política reinforcement learning, optimal control, adaptive control, mechanical systems, modelfree, utterly unknown dynamics, parametric approximation, Q-learning, policy iteration INGENIERÍA Y TECNOLOGÍA CIENCIAS TECNOLÓGICAS TECNOLOGÍA DE LOS ORDENADORES INTELIGENCIA ARTIFICIAL INTELIGENCIA ARTIFICIAL

Genetic analysis of Vibrio parahaemolyticus O3:K6 strains that have been isolated in Mexico since 1998

CARLOS ABRAHAM GUERRERO RUIZ (2017, [Artículo])

Vibrio parahaemolyticus is an important human pathogen that has been isolated worldwide from clinical cases, most of which have been associated with seafood consumption. Environmental and clinical toxigenic strains of V. parahaemolyticus that were isolated in Mexico from 1998 to 2012, including those from the only outbreak that has been reported in this country, were characterized genetically to assess the presence of the O3:K6 pandemic clone, and their genetic relationship to strains that are related to the pandemic clonal complex (CC3). Pathogenic tdh+ and tdh+/trh+ strains were analyzed by pulsed-field gel electrophoresis (PFGE) and multilocus sequence typing (MLST). Also, the entire genome of a Mexican O3:K6 strain was sequenced. Most of the strains were tdh/ORF8-positive and corresponded to the O3:K6 serotype. By PFGE and MLST, there was very close genetic relationship between ORF8/O3:K6 strains, and very high genetic diversities from non-pandemic strains. The genetic relationship is very close among O3:K6 strains that were isolated in Mexico and sequences that were available for strains in the CC3, based on the PubMLST database. The whole-genome sequence of CICESE-170 strain had high similarity with that of the reference RIMD 2210633 strain, and harbored 7 pathogenicity islands, including the 4 that denote O3:K6 pandemic strains. These results indicate that pandemic strains that have been isolated in Mexico show very close genetic relationship among them and with those isolated worldwide. © 2017 Guerrero et al. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.

Article, bacterial strain, biofouling, controlled study, Crassostrea, food intake, gene sequence, genetic analysis, genetic variability, Japan, Mexican, Mexico, molecular phylogeny, nonhuman, pandemic, pathogenicity island, sea food, serotyping, toxi BIOLOGÍA Y QUÍMICA CIENCIAS DE LA VIDA GENÉTICA GENÉTICA

Phylogenetic relationships of Pseudo-nitzschia subpacifica (Bacillariophyceae) from the Mexican Pacific, and its production of domoic acid in culture

Sonia Quijano (2020, [Artículo])

Pseudo-nitzschia is a cosmopolitan genus, some species of which can produce domoic acid (DA), a neurotoxin responsible for the Amnesic Shellfish Poisoning (ASP). In this study, we identified P. subpacifica for the first time in Todos Santos Bay and Manzanillo Bay, in the Mexican Pacific using SEM and molecular methods. Isolates from Todos Santos Bay were cultivated under conditions of phosphate sufficiency and deficiency at 16°C and 22°C to evaluate the production of DA. This toxin was detected in the particulate (DAp) and dissolved (DAd) fractions of the cultures during the exponential and stationary phases of growth of the cultures. The highest DA concentration was detected during the exponential phase grown in cells maintained in P-deficient medium at 16°C (1.14 ± 0.08 ng mL-1 DAd and 4.71 ± 1.11 × 10−5 ng cell-1 of DAp). In P-sufficient cultures DA was higher in cells maintained at 16°C (0.25 ± 0.05 ng mL-1 DAd and 9.41 ± 1.23 × 10−7 ng cell-1 of DAp) than in cells cultured at 22°C. Therefore, we confirm that P. subpacifica can produce DA, especially under P-limited conditions that could be associated with extraordinary oceanographic events such as the 2013–2016 "Blob" in the northeastern Pacific Ocean. This event altered local oceanographic conditions and possibly generated the presence of potential harmful species in areas with economic importance on the Mexican Pacific coast. © 2020 Quijano-Scheggia et al. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.

domoic acid, domoic acid, kainic acid, Article, cell growth, controlled study, diatom, Mexico, morphology, nonhuman, Pacific Ocean, phylogeny, plant cell, plant growth, Pseudo nitzschia, toxin analysis, cell culture technique, classification, diatom, CIENCIAS FÍSICO MATEMÁTICAS Y CIENCIAS DE LA TIERRA CIENCIAS DE LA TIERRA Y DEL ESPACIO OCEANOGRAFÍA OCEANOGRAFÍA