Adsorption and Photocatalytic Degradation of Methylene Blue in Carbon Nanotubes: A Review with Bibliometric Analysis

Hugo Albeiro Saldarriaga Noreña MARIO ALFONSO MURILLO TOVAR JOSEFINA VERGARA SANCHEZ JEANNETE RAMIREZ APARICIO Lorena Magallón Cacho MARIA LUISA GARCIA BETANCOURT (2023, [Artículo])

Wastewater-containing dyes are an environmental problem. The prime source of dye pollutants is the textile industry, such as paper manufacturing, food processing, leather, pigments, etc. Dye removal from wastewater using nanotechnology has received attention in recent decades thanks to efficient nanomaterials improving traditional technologies. In recent years, multiple research reports on carbon nanotubes for dye removal and photocatalytic dye degradation provided substantial insight into the comprehension of nanotechnology and remediation. This work presents a review and bibliometric analysis of carbon nanotubes for dye removal and photocatalytic dye degradation, which have an environmental impact today. The bibliometric study showed that the current research tendency on carbon nanotubes applied in dye removal and photocatalysis is still growing. According to research, this work observed that carbon nanotubes for dye removal exhibit high removal and efficient photocatalysis activity, indicating the functionality of nanotechnology for environmental remediation. The analysis of the parameters involved in the removal studies, such as temperature and pH, showed adsorption behavior. The photodegradation of methylene blue demonstrated the photocatalytic activity of carbon nanotubes attributed to the sp2 lattice of graphitic configuration.

BIOLOGÍA Y QUÍMICA QUÍMICA adsorption; carbon nanotubes; methylene blue; photocatalysis; photodegradation of methylene blue

Data for the synthesis, characterization, and use of xerogels as adsorbents for the removal of fluoride and bromide in aqueous phase

NAHUM ANDRES MEDELLIN CASTILLO ELIZABETH DIANE ISAACS PAEZ Liliana Giraldo Gutiérrez JUAN CARLOS MORENO-PIRAJAN ITZIA RODRIGUEZ MENDEZ SIMON YOBANNY REYES LOPEZ JAIME REYES HERNANDEZ SONIA JUDITH SEGOVIA SANDOVAL (2022, [Artículo])

"Groundwater with high fluoride concentrations has been recognized as one of the serious concerns worldwide. Besides, the fluoride released into the groundwater by slow dissolution of fluoride-containing rocks, various industries also contribute to fluoride pollution [1]. Excess intake of fluoride leads to various health problems such as dental and skeletal fluorosis, cancer, infertility, brain damage, thyroid diseases, etc. [2]. On the other hand, bromide is naturally present in surface and groundwater sources. However, during the chlorination process, bromide can be oxidized to HOBr, which can react with natural organic matter in water to form brominated organic disinfection byproducts, which are very harmful to human health [3]. Among various methods for water treatment, the adsorption process has been widely used and seems to be an efficient and attractive method for the removal of many contaminants in water, such as anions, in terms of cost, simplicity of design, and operation [4,5]. In the past years, xerogels and carbon xerogels, a new type of adsorbents, which are synthesized by the sol-gel polycondensation of resorcinol and formaldehyde, have gained attention due to their moldable texture and chemical properties [6]. Moreover, melamine addition in resorcinol and formaldehyde xerogels adds basic groups on its surface, favouring Lewis acid-base interactions between xerogels and other components by adsorption [7]. In this data article, the synthesis of three resorcinolformaldehyde (R/F) xerogels with an increasing amount of melamine (M) was carried out by colloidal polymerization (molar ratios of M/R = 0.5, M/R = 1.0, and M/R = 2.0). Additionally, samples of M/R = 0.5 xerogel were carbonized at 400, 450, and 550 degrees C under an inert atmosphere to increase their specific area. Organic and carbon xerogels obtained were characterized by FTIR, TGA, SEM, Physisorption of N 2, and the pH at the point of zero charge (pH PZC). All organic xerogels were also tested as adsorbents on the removal of fluoride and bromide ions from aqueous phase. The Freundlich, Langmuir, and Radke-Prausnitz isotherm models were applied to interpret the experimental data from adsorption equilibrium. Additionally, the data of the mass of the xerogel needed to remove fluoride and bromide from groundwater and fulfill the maximum concentration levels are also included."

Xerogels Melamine Colloidal polymerization Fluoride and bromide ions Adsorption BIOLOGÍA Y QUÍMICA QUÍMICA QUÍMICA

The banana MaWRKY18, MaWRKY45, MaWRKY60 and MaWRKY70 genes encode functional transcription factors and display differential expression in response to defense phytohormones

SERGIO GARCIA LAYNES VIRGINIA AURORA HERRERA VALENCIA Lilia Guadalupe Tamayo Torres VERONICA LIMONES BRIONES FELIPE ALONSO BARREDO POOL FRAY MARTIN BAAS ESPINOLA Angel Alpuche-Solis CARLOS ALBERTO PUCH HAU SANTY PERAZA ECHEVERRIA (2022, [Artículo])

WRKY transcription factors (TFs) play key roles in plant defense responses through phytohormone signaling pathways. However, their functions in tropical fruit crops, especially in banana, remain largely unknown. Several WRKY genes from the model plants rice (OsWRKY45) and Arabidopsis (AtWRKY18, AtWRKY60, AtWRKY70) have shown to be attractive TFs for engineering disease resistance. In this study, we isolated four banana cDNAs (MaWRKY18, MaWRKY45, MaWRKY60, and MaWRKY70) with homology to these rice and Arabidopsis WRKY genes. The MaWRKY cDNAs were isolated from the wild banana Musa acuminata ssp. malaccensis, which is resistant to several diseases of this crop and is a progenitor of most banana cultivars. The deduced amino acid sequences of the four MaWRKY cDNAs revealed the presence of the conserved WRKY domain of ~60 amino acids and a zinc-finger motif at the N-terminus. Based on the number of WRKY repeats and the structure of the zinc-finger motif, MaWRKY18 and MaWRKY60 belong to group II of WRKY TFs, while MaWRKY45 and MaWRKY70 are members of group III. Their corresponding proteins were located in the nuclei of onion epidermal cells and were shown to be functional TFs in yeast cells. Moreover, expression analyses revealed that the majority of these MaWRKY genes were upregulated by salicylic acid (SA) or methyl jasmonate (MeJA) phytohormones, although the expression levels were relatively higher with MeJA treatment. The fact that most of these banana WRKY genes were upregulated by SA or MeJA, which are involved in systemic acquired resistance (SAR) or induced systemic resistance (ISR), respectively, make them interesting candidates for bioengineering broad-spectrum resistance in this crop. © 2022 by the authors.

BANANA TRANSCRIPTION FACTOR WRKY DEFENSE PHYTOHORMONES SALICYLIC ACID METHYL JASMONATE SAR ISR BROAD-SPECTRUM RESISTANCE BIOLOGÍA Y QUÍMICA CIENCIAS DE LA VIDA GENÉTICA GENÉTICA MOLECULAR DE PLANTAS GENÉTICA MOLECULAR DE PLANTAS

The Banana MaWRKY18, MaWRKY45, MaWRKY60 and MaWRKY70 Genes Encode Functional Transcription Factors and Display Differential Expression in Response to Defense Phytohormones

SERGIO GARCIA LAYNES VIRGINIA AURORA HERRERA VALENCIA Lilia Guadalupe Tamayo Torres VERONICA LIMONES BRIONES FELIPE ALONSO BARREDO POOL FRAY MARTIN BAAS ESPINOLA Ángel Gabriel Alpuche Solís CARLOS ALBERTO PUCH HAU SANTY PERAZA ECHEVERRIA (2022, [Artículo])

"WRKY transcription factors (TFs) play key roles in plant defense responses through phytohormone signaling pathways. However, their functions in tropical fruit crops, especially in banana, remain largely unknown. Several WRKY genes from the model plants rice (OsWRKY45) and Arabidopsis (AtWRKY18, AtWRKY60, AtWRKY70) have shown to be attractive TFs for engineering disease resistance. In this study, we isolated four banana cDNAs (MaWRKY18, MaWRKY45, MaWRKY60, and MaWRKY70) with homology to these rice and Arabidopsis WRKY genes. The MaWRKY cDNAs were isolated from the wild banana Musa acuminata ssp. malaccensis, which is resistant to several diseases of this crop and is a progenitor of most banana cultivars. The deduced amino acid sequences of the four MaWRKY cDNAs revealed the presence of the conserved WRKY domain of ~60 amino acids and a zinc-finger motif at the N-terminus. Based on the number of WRKY repeats and the structure of the zinc-finger motif, MaWRKY18 and MaWRKY60 belong to group II of WRKY TFs, while MaWRKY45 and MaWRKY70 are members of group III. Their corresponding proteins were located in the nuclei of onion epidermal cells and were shown to be functional TFs in yeast cells. Moreover, expression analyses revealed that the majority of these MaWRKY genes were upregulated by salicylic acid (SA) or methyl jasmonate (MeJA) phytohormones, although the expression levels were relatively higher with MeJA treatment. The fact that most of these banana WRKY genes were upregulated by SA or MeJA, which are involved in systemic acquired resistance (SAR) or induced systemic resistance (ISR), respectively, make them interesting candidates for bioengineering broad-spectrum resistance in this crop."

Banana Transcription factor WRKY Defense phytohormones Salicylic acid Methyl jasmonate SAR ISR Broad-spectrum resistance BIOLOGÍA Y QUÍMICA CIENCIAS DE LA VIDA GENÉTICA GENÉTICA

Fabricación de nanopartículas de oro dentro de óxido de aluminio (γ-Al2O3) nanoestructurado con cavidades esféricas

Manufacturing of Gold Nanoparticles within Nanostructured Aluminum Oxide (γ-Al2O3) with Spherical Cavities

Mariela de Jesús Franco Gallegos (2023, [Tesis de maestría])

Los catalizadores basados en nanopartículas de oro han generado gran interés, gracias a su capacidad de ser selectivos en la promoción de reacciones específicas o en la producción de productos deseados, minimizando la formación de productos secundarios no deseados; sus propiedades electrónicas únicas; y su utilización bajo condiciones ambientales. Sin embargo, la desventaja principal de los catalizadores de oro es la sinterización de las nanopartículas debido a su baja temperatura de fusión, lo que provoca la pérdida de actividad catalítica y la desactivación del catalizador. Una de lassoluciones que ofrece el uso de la nanociencia y la nanotecnología es la utilización de soportes nanoestructurados que den mejor estabilidad a las nanopartículas y las protejan de la desactivación. En este trabajo se sintetizaron catalizadores basados en nanopartículas de oro soportados y encapsulados en alúmina macroporosa, por un método de impregnación húmeda asistida por ultrasonido; un método sencillo, rápido y ecológico. El desempeño catalítico de materiales sintetizados se analizó mediante espectroscopía UV-Visible in-situ en la reducción de 4-Nitrofenol a 4-Aminofenol. Así mismo, se presentan las caracterizaciones por TEM, SEM, FT-IR, espectroscopía UV-Visible, y XRD de catalizadores obtenidos. Se obtuvieron catalizadores altamente activos con alto rendimiento gracias al uso de un soporte nanoestructurado.

Catalysts -based on gold nanoparticles have recently gained interest due to their ability to selectively promote specific catalytic reactions or produce desired products, while minimizing the formation of unwanted byproducts, their unique electronic properties, and their utilization under ambient conditions. However, the main drawback of gold catalysts is the sintering of nanoparticles due to their low melting temperature, which leads to loss of catalytic activity and catalyst deactivation. One of the solutions offered by nanoscience and nanotechnology is the use of nanostructured supports that provide better stability to the nanoparticles and protect them from deactivation. In this work, gold nanoparticle-based catalysts supported and encapsulated in macroporous alumina were synthesized using a simple, fast, and eco-friendly method of ultrasound-assisted wet impregnation. The catalytic performance of synthetized materials was evaluated by in-situ UV-Visible spectroscopy in the reduction of 4-Nitrophenol to 4-Aminophenol. In addition, their characterization by TEM, SEM, FT-IR, UV Visible spectroscopy and XRD are presented. Highly active catalysts with high performance were obtained thanks to the use of a nanostructured supports.

nanopartículas de oro, alúmina macroporosa, impregnación, reducción 4-NF gold nanoparticles, macroporous alumina, impregnation, 4-NF reduction INGENIERÍA Y TECNOLOGÍA CIENCIAS TECNOLÓGICAS TECNOLOGÍA DE MATERIALES PROPIEDADES DE LOS MATERIALES PROPIEDADES DE LOS MATERIALES

Aplicación de 1-MCP en diferentes ecotipos de ciruela mexicana (Spondias purpurea L.) de México

MARÍA GORETTI TRANSITO DAMASO (2023, [Tesis de maestría])

La ciruela mexicana es un frutal nativo de México, se distribuye en la vertiente del

Pacífico, centro de Veracruz y Península de Yucatán. El árbol de ciruela mexicana

produce frutos de diferentes tamaños, colores y sabores, existe una gran diversidad

que se aprecia tanto en los meses de marzo a junio, como de septiembre a noviembre.

El principal uso de la fruta es en fresco como fruta de temporada, la vida útil de la

ciruela de estación seca no es mayor a 5 d, por lo cual es un frutal que se considera

importante de manera local. Actualmente poco se han desarrollado y evaluado

tecnologías para incrementar la vida útil de este producto hortícola, por lo que en el

presente trabajo se evaluó la respuesta de cinco ecotipos de ciruela mexicana a la

aplicación de 1-metilciclopropeno (1-MCP), con la finalidad de proponerlo para el

desarrollo del manejo poscosecha adecuado de esta fruta. Durante abril a septiembre

de 2022 se cosecharon frutos de ciruela mexicana procedentes de Guerrero y Morelos.

Los frutos se cosecharon en etapa ½ verde. Los frutos fueron transportados al

Laboratorio de Producción Agrícola de la Facultad de Ciencias Agropecuarias en la

Universidad Autónoma del Estado de Morelos, donde se lavaron y se dejaron secar al

ambiente. Posteriormente se colocaron en cajas de plástico herméticas durante 12 h

y se aplicó 0, 500 y 1000 nL L-1 de 1-MCP, se evaluaron a temperatura ambiente (24.9

± 1 °C; 55.1 ± 6 % HR) y después de 5, 10 y 15 d en almacenamiento a 12 °C. Se

evaluaron los cambios fisicoquímicos y fisiológicos de cada ecotipo. La aplicación de

1-MCP, independiente del tiempo de almacenamiento inhibió y retrasó la velocidad de

respiración y producción de etileno, mantuvo la firmeza y retrasó la pigmentación

característica de cada ecotipo, con poca acción en la concentración de sólidos solubles

totales y acidez titulable, sin efecto claro en compuestos fenólicos, flavonoides y

actividad antioxidante, y sin ningún efecto en la pérdida de masa. El efecto del 1-MCP

permite conservar la fruta a temperatura ambiente hasta 6 u 8 d; la refrigeración a 12

°C potencia la acción del 1-MCP permitiendo conservar hasta 9 a 20 d después de

salir de almacenamiento.

The Mexican plum is a fruit native to Mexico, it is distributed on the Pacific slope, central

Veracruz and Yucatan Peninsula. The Mexican plum tree produces fruits of different

sizes, colors and flavors, there is a great diversity that is appreciated both in the months

of March to June, and from September to November. The main use of the fruit is fresh

as a seasonal fruit, the shelf life of the dry season plum is not more than 5 d, so it is a

fruit tree that is considered important locally. Currently, little technologies have been

developed and evaluated to increase the shelf life of this horticultural product, so in this

work the response of five ecotypes of Mexican plum to the application of 1-

methylcyclopropene (1-MCP) was evaluated, in order to propose it for the development

of adequate postharvest management of this fruit. During April to September 2022,

Mexican plum fruits were harvested from Guerrero and Morelos. The fruits were

harvested in stage 1/2 green. The fruits were transported to the Agricultural Production

Laboratory of the Faculty of Agricultural Sciences at the Autonomous University of the

State of Morelos, where they were washed and left to dry in the environment.

Subsequently, they were placed in airtight plastic boxes for 12 h and 0, 500 and 1000

nL L-1 of 1-MCP were applied, evaluated at room temperature (24.9 ± 1.1 °C; 55.1 ±

6.2 % RH) and after 5, 10 and 15 d in storage at 12 °C. The physicochemical and

physiological changes of each ecotype were evaluated. The application of 1-MCP,

independent of storage time inhibited and delayed the rate of respiration and production

of ethylene, maintained the firmness and delayed the pigmentation characteristic of

each ecotype, with little action on the concentration of total soluble solids and titratable

acidity, with no clear effect on phenolic compounds, flavonoids and antioxidant activity,

and without any effect on mass loss. The effect of 1-MCP allows the fruit to be

preserved at room temperature up to 6 or 8 d; cooling at 12 °C enhances the action of

1-MCP allowing to preserve up to 9 to 20 d after leaving storage

CIENCIAS AGROPECUARIAS Y BIOTECNOLOGÍA CIENCIAS AGRARIAS Ciruela mexicana, 1-metilciclopropeno, almacenamiento, refrigeración, calidad, poscosecha Mexican plum, 1-methylcyclopropene, storage, refrigeration, quality, postharvest.