El impacto de la violencia en los flujos migratorios procedentes de Guatemala

Thania Berenice Hernández Alarcón (2021, [Tesis de maestría])

Con este trabajo buscamos entender cómo la violencia en el lugar de origen de una persona puede motivar su decisión de migrar. La aproximación teórica al fenómeno de la migración sugiere que la provisión relativa de bienes públicos es un factor en el análisis costo beneficio mediante el cual el agente evalúa la rentabilidad de la migración. Desde esta perspectiva, la búsqueda de beneficios pecuniarios, como un mayor salario, es compatible con la búsqueda de beneficios no pecuniarios, como mayores niveles de seguridad. Nos interesamos por evaluar lo anterior para el caso de Guatemala. Sirviéndonos de la variación trimestral de trecientos veintinueve municipios en una ventana de once años buscamos evidencia de que la tasa de migración de personas de origen guatemalteco que buscan empleo en México o Estados Unidos se correlaciona de manera positiva con la tasa de homicidios en sus municipios de origen. Nuestros resultados sugieren que esto se cumple y que aumentos en los niveles de violencia homicida pueden propiciar desplazamientos laborales.

Guatemala -- Emigration and immigration -- Effect of violence on -- Econometric models United States -- Emigration and immigration -- Econometric models. CIENCIAS SOCIALES CIENCIAS SOCIALES

Contrasting spatial patterns in active-fire and fire-suppressed mediterranean climate old-growth mixed conifer forests

Danny L. Fry  (2014, [Artículo])

In Mediterranean environments in western North America, historic fire regimes in frequent-fire conifer forests are highly variable both temporally and spatially. This complexity influenced forest structure and spatial patterns, but some of this diversity has been lost due to anthropogenic disruption of ecosystem processes, including fire. Information from reference forest sites can help management efforts to restore forests conditions that may be more resilient to future changes in disturbance regimes and climate. In this study, we characterize tree spatial patterns using four-ha stem maps from four old-growth, Jeffrey pine-mixed conifer forests, two with active-fire regimes in northwestern Mexico and two that experienced fire exclusion in the southern Sierra Nevada. Most of the trees were in patches, averaging six to 11 trees per patch at 0.007 to 0.014 ha-1, and occupied 27-46% of the study areas. Average canopy gap sizes (0.04 ha) covering 11-20% of the area were not significantly different among sites. The putative main effects of fire exclusion were higher densities of single trees in smaller size classes, larger proportion of trees (≥56%) in large patches (≥10 trees), and decreases in spatial complexity. While a homogenization of forest structure has been a typical result from fire exclusion, some similarities in patch, single tree, and gap attributes were maintained at these sites. These within-stand descriptions provide spatially relevant benchmarks from which to manage for structural heterogeneity in frequent-fire forest types.

article, climate, controlled study, ecosystem fire history, forest structure, geographic distribution, geographic mapping, land use, mathematical computing, mathematical model, Mexico, spatial analysis, taiga, United States, comparative study, conife CIENCIAS AGROPECUARIAS Y BIOTECNOLOGÍA CIENCIAS AGROPECUARIAS Y BIOTECNOLOGÍA

Distance learning for farmers: Experience during the pandemic

Andrea Gardeazabal (2023, [Documento de trabajo])

In response to the COVID-19 pandemic's disruption of farmer training—a crucial component for enhancing the resilience and livelihoods of smallholder farmers—CIMMYT innovated educational solutions to sustain capacity building in agri-food systems. Addressing the challenges of limited mobile device access, poor internet connectivity, and digital illiteracy, CIMMYT implemented two pilot projects in Mexico. These projects facilitated distance learning for adult farmers in rural areas, employing both internet-based and non-internet methods. The non-internet approach utilized traditional media like print, while the internet-based approach leveraged WhatsApp for educational content delivery. Building on these experiences, CIMMYT expanded its offerings by creating micro -courses delivered through WhatsApp, hosted on the Co-LAB's new Learning Network platform, specifically targeting farmers. This paper delves into the various strategies, methods, and techniques adopted, documenting the learning outcomes, results, and key conclusions drawn from these innovative training initiatives.

Distance Learning Digital Inclusion Innovative Training CIENCIAS AGROPECUARIAS Y BIOTECNOLOGÍA DISTANCE EDUCATION CAPACITY DEVELOPMENT METHODS COMMUNICATION TECHNOLOGY

Application of spheroidal agglomerates of γ-Al2O3 in the fluoride removal from aqueous medium

Aplicación de aglomerados esferoidales de γ-Al2O3 en la remoción de fluoruro de medio acuoso

RAFAEL ROMERO TOLEDO VICTOR RUIZ SANTOYO ULISES ZURITA LUNA GUSTAVO RANGEL PORRAS MERCED MARTINEZ ROSALES (2019, [Artículo])

En el presente estudio se investigó un adsorbente aglomerado esferoidal de γ-Al2O3 obtenido a partir de pseudoboehmita para la eliminación eficaz de fluoruro de un medio acuoso. Las propiedades superficiales se caracterizaron por diversas técnicas: XRD, fisisorción de N2, FE-SEM/EDS, RMN 27Al, adsorción de piridina por FT-IR, PZy tamaño de partícula. Se llevaron a cabo experimentos en lotes y se compararon con una alúmina activada comercial (AA). El proceso se llevó a cabo a pH 5, 7 y 9, a 25 y 35 ºC. Los resultados experimentales indicaron que los aglomerados esferoidales de γ-Al2O3 eliminan hasta 15 mg/g, con una capacidad de adsorción mayor que AA de 13 mg/g, a pH 5, estudiados a 25 y 35 ºC. El proceso de adsorción de F-en γ-Al2O3 y AA siguió la cinética de pseudo-primer orden y la isoterma de Langmuir. Los resultados muestran un adsorbente eficaz para la eliminación de F-.

A spheroidal agglomerate γ-Al2O3 adsorbent obtained from pseudoboehmite for effective removal of fluoride from aqueous medium was investigated in the present study. The surface properties were characterized by several techniques: XRD, physisorption of N2, FE-SEM/EDS, 27Al NMR, FT-IR Pyridine adsorption, PZ and particle size. Batch experiments were conducted and they were compared with a commercial activated alumina (AA). The process was carried out at pH 5, 7, and 9, then at 25 and 35 ºC. Batch experimental results indicated that the spheroidal agglomerates of γ-Al2O3 remove up to 15 mg/g with a higher adsorption capacity than AA of 13 mg/g, at pH 5, studied at 25 and 35 °C. The F−adsorption processes in γ-Al2O3 and AA followed the pseudo-first-order kinetics and the Langmuir isotherm. The results showed an adsorbent effective for removal of F−.

BIOLOGÍA Y QUÍMICA Fluoride γ-Al2O3 Spheroidal agglomerates Adsorbent Water Fluoruro γ-Al2O3 Aglomerados esferoidales Adsorbentes Agua

Statistical machine-learning methods for genomic prediction using the SKM library

Osval Antonio Montesinos-Lopez Brandon Alejandro Mosqueda González Jose Crossa (2023, [Artículo])

Sparse Kernel Methods R package Statistical Machine Learning Genomic Selection CIENCIAS AGROPECUARIAS Y BIOTECNOLOGÍA MARKER-ASSISTED SELECTION MACHINE LEARNING GENOMICS METHODS

A novel method for genomic-enabled prediction of cultivars in new environments

Osval Antonio Montesinos-Lopez Brandon Alejandro Mosqueda González Jose Crossa (2023, [Artículo])

Genomic Best Linear Unbiased Prediction Gains in Accuracy Genomic Prediction Novel Methods CIENCIAS AGROPECUARIAS Y BIOTECNOLOGÍA GENOTYPE ENVIRONMENT INTERACTION METHODS ENVIRONMENT

Multimodal deep learning methods enhance genomic prediction of wheat breeding

Carolina Rivera-Amado Francisco Pinto Francisco Javier Pinera-Chavez David González-Diéguez Matthew Paul Reynolds Paulino Pérez-Rodríguez Huihui Li Osval Antonio Montesinos-Lopez Jose Crossa (2023, [Artículo])

Conventional Methods Genomic Prediction Accuracy Deep Learning Novel Methods CIENCIAS AGROPECUARIAS Y BIOTECNOLOGÍA WHEAT BREEDING MACHINE LEARNING METHODS MARKER-ASSISTED SELECTION

Phenotypic assessment of genetic gain from selection for improved drought tolerance in semi-tropical maize populations

Terence Molnar Somak Dutta Thanda Dhliwayo Samuel Trachsel Michael Lee (2023, [Artículo])

Drought Tolerant Population Topcross Water Deficit CIENCIAS AGROPECUARIAS Y BIOTECNOLOGÍA DROUGHT TOLERANCE WATER MAIZE CLIMATE CHANGE GENETIC GAIN

On-farm storage loss estimates of maize in Kenya using community survey methods

Hugo De Groote Anani Bruce (2023, [Artículo])

Maize is the most important staple in sub-Saharan Africa (SSA), with highly seasonal production. High storage losses affect food security, but good estimations are lacking. A new method using focus group discussions (FGDs) was tested with 121 communities (1439 farmers, 52% women) in Kenya's six maize-growing zones, to estimate the maize losses to storage pests and analyze farmer practices. As control strategies, half of the farmers used chemical pesticides (49%), while hermetic bags (16%) and botanicals (15%) were also popular. Relative loss from weevils in the long rains was estimated at 23%, in the short rains 18%, and annually 21%. Fewer farmers were affected by the larger grain borer (LGB) than by maize weevils: 42% in the long rainy season and 32% in the short rainy season; losses from LGB were also smaller: 19% in the long season, 17% in the short season, and 18% over the year. Total storage loss, from both species combined, was estimated at 36%, or 671,000 tonnes per year. The greatest losses occur in the humid areas, especially the moist mid-altitudes (56%), and with smaller loss in the drylands (20–23%). Extrapolating the point data and overlaying with the maize production map shows the geographic distribution of the losses, with the most important area found around Lake Victoria. FGDs provide convenient and cheap tools to estimate storage losses in representative communities, but a total loss estimate of 36% is higher than is found in other studies, so its accuracy and framing effects need to be assessed. We conclude that storage pests remain a major problem, especially in western Kenya, and that the use of environmentally friendly technologies such as hermetic storage and botanicals needs more attention, both by the public extension service and private agrodealers.

Larger Grain Borer Maize Weevil CIENCIAS AGROPECUARIAS Y BIOTECNOLOGÍA MAIZE STORAGE LOSSES PESTS SURVEY METHODS

Universal fixation system for pad printing of plastic parts

JOSE ALEJANDRO FERNANDEZ RAMIREZ (2023, [Artículo])

Pad printing is used in automotive, medical, electrical and other industries, employing diverse materials to transfer a 2D image onto a 3D object with different sizes and geometries. This work presents a universal fixation system for pad printing of plastic parts (UFSP4) in response to the needs of small companies that cannot afford to invest in the latest technological advances. The UFSP4 comprises two main subsystems: a mechanical support system (i.e., support structure, jig matrix and braking system) and a control system (i.e., an electronic system and an electric-hydraulic system). A relevant feature is the combination of a jig matrix and jig pins to fixate complex workpieces with different sizes. Using finite element analysis (FEA), in the mesh convergence, the total displacement converges to 0.00028781 m after 12,000 elements. The maximum equivalent stress value is 1.22 MPa for the polycarbonate plate in compliance with the safety factor. In a functionality test of the prototype performed in a production environment for one hour, the jigs fixed by the plate did not loosen, maintaining the satisfactory operation of the device. This is consistent with the displacement distribution of the creep analysis and shows the absence of the creep phenomenon. Based on FEA that underpinned the structural health computation of the braking system, the prototype was designed and built, seeking to ensure a reliable and safe device to fixate plastic parts, showing portability, low-cost maintenance and adaptability to the requirements of pad printing of automotive plastic parts.

Use of AI tools declaration: The authors declare they have not used Artificial Intelligence (AI) tools in the creation of this article.

Acknowledgments: To the company Plásticos Decorados and Centro de Tecnología Avanzada (CIATEQ A.C.) for the facilities and support to carry out this work. To the Consejo Nacional de Humanidades, Ciencias y Tecnologías (CONAHCYT) for a Ph.D. scholarship support number 500839 and CONAHCYT SNI.

Conflict of interest: The authors declare there are no conflicts of interest.

Modular fixtures Jig matrix Prototype design Pad printing Fixture methods INGENIERÍA Y TECNOLOGÍA CIENCIAS TECNOLÓGICAS OTRAS ESPECIALIDADES TECNOLÓGICAS OTRAS OTRAS