Título

Study of Al composites prepared by high-energy ball milling; Effect of processing conditions

Autor

IVANOVICH ESTRADA GUEL

ROBERTO MARTINEZ SANCHEZ

Nivel de Acceso

Acceso Abierto

Licencia

http://creativecommons.org/licenses/by-nc/4.0

Referencia de datos

doi: https://doi.org/10.1016/j.jallcom.2015.01.018

Materias

Aluminum; Composites; High-energy milling - (AUTOR) BIOLOGÍA Y QUÍMICA - (CTI) QUÍMICA - (CTI)

Resumen o descripción

The present work deals with the synthesis of some Al-based composites prepared by mechanical milling and processing by powder metallurgy followed by the evaluation of process conditions as: type of additive, their concentration and milling intensity studying its effect on the characteristics of the powder composite and mechanical performance of the composite. Powder samples were microstructural characterized by electronic microscopy (SEM–TEM) and the mechanical response was followed by hardness and compressive tests. A pronounced effect on the mechanical response of the specimens was evident after the addition of reinforced particles and milling intensity. Microscopy studies showed a uniform dispersion of the reinforcing particles in the metallic matrix at nanometric scale and an important grain refinement of the Al matrix was confirmed. After processing, a 66% increase on the mechanical response was reached with 1% of additive complemented with short milling intensities.

Fecha de publicación

2014

Tipo de publicación

Artículo

Recurso de información

http://cimav.repositorioinstitucional.mx/jspui/handle/1004/305

Formato

application/pdf

Idioma

Inglés

Relación

&

Martínez-Sánchez, R. (2015). Study of Al composites prepared by high-energy ball milling; Effect of processing conditions. Journal of Alloys and Compounds, 643, S172-S177.

Sugerencia de citación

Mendoza-Duarte, J. M., Estrada-Guel, I., Carreño-Gallardo, C.,

Repositorio Orígen

Fuente de Objetos Científicos Open Access

Descargas

101