Título
Nanocrystalline PrCo5 alloy obtained by mechanical milling
Autor
FRANCISCO JAVIER RIVERA GOMEZ
JOSE TRINIDAD ELIZALDE GALINDO
JOSE ANDRES MATUTES AQUINO
Nivel de Acceso
Acceso Abierto
Materias
Resumen o descripción
Nanostructured PrCo5 powderswere obtained by mechanical milling, annealing in
high vacuum in sealed ampoules and subsequent quenching in water. The highest
intrinsic coercivity value (iHC = 1.385MA/m) and magnetization ratio (σr/σmax = 0.66)
were determined in powders milled for 240 min and annealed at 1073K for 1 min. The
enhanced remanence (σr/σmax > 0.5) suggests strong exchange interactions between
the adjacent crystallites. This is in good agreement with the small average crystallite
size, <D> = 15 nm. The high magnetic properties observed in these nanostructured
PrCo5 intermetallic alloys have their origin in its relatively high uniaxial
magnetocrystalline anisotropy field, and in the homogeneous nanostructure developed
by mechanical milling process and subsequent annealing.
Fecha de publicación
2008
Tipo de publicación
Artículo
Versión de la publicación
Versión enviada
Recurso de información
Formato
application/pdf
Idioma
Inglés
Repositorio Orígen
Fuente de Objetos Científicos Open Access
Descargas
350