Using homosoils for quantitative extrapolation of soil mapping models

Andree Nenkam Alexandre Wadoux Budiman Minasny Alex McBratney Pierre C. Sibiry Traore Gatien Falconnier Anthony Whitbread (2022, [Artículo])

Cubist Digital Soil Mapping Model-Based Validation Soil Spatial Variation Soil-Forming Factors CIENCIAS AGROPECUARIAS Y BIOTECNOLOGÍA LAND USE ORGANIC CARBON SOIL SURVEYS SPATIAL VARIATIONS

Sitios Ramsar de la Bahía de La Paz: Amenazas y estrategias para su conservación

Ramsar Sites of La Paz Bay: Threats and strategies for their conservation

Janette Magalli Murillo Jiménez José Juan Pérez Navarro María Concepción Lora Vilchis MARIA DEL ROCIO MARCIN MEDINA LAURA CARREON PALAU Jorge A. Del Angel_Rodríguez Jose Luis Ortiz Galindo Jesús Echevarría Haro (2022, [Artículo])

"En 2017–2018 la Secretaría de Marina del Gobierno de México (SEMAR) realizó actividades de dragado en la Bahía y Ensenada de La Paz, Baja California Sur. Paralelamente ocurrieron afectaciones severas en el sitio Ramsar “Humedales Mogote-Ensenada de La Paz”. Los dragados y el mal manejo de los residuos generaron preocupación ciudadana por el sitio y los organismos que ahí habitan, lo que se manifestó en protestas tanto mediáticas, como legales ante SEMARNAT por algunas organizaciones de la sociedad civil. Esta situación propició la organización de un Foro-Taller realizado el 3 de octubre de 2019, con el fin de evaluar la problemática de los humedales tanto de la Ensenada como de la Bahía de La Paz, ambos incluidos en la Convención Ramsar. El presente trabajo resume los resultados de este evento y refleja la gran preocupación por los sitios Ramsar, tanto de la sociedad civil, como de las diferentes instancias gubernamentales. Estos resultados se integraron en un documento entregado en febrero de 2020 solo a autoridades de SEMARNAT, CONANP y Congreso del Estado de Baja California Sur, previo a la pandemia. Durante el taller se observó una amplia gama de problemas, originados en gran medida por los habitantes y reforzados por el incumplimiento de los compromisos adquiridos por México ante la Convención Ramsar, patente en la desatención de los sitios Ramsar, en particular de los Humedales Mogote-Ensenada de La Paz, donde no hay una normatividad específica que indique la responsabilidad de la gestión de estos ecosistemas. En contraste, el humedal de Balandra cuenta con protección especial al formar parte de una ANP. La conclusión general más importante del evento fue que sólo una sociedad bien organizada, informada de los servicios ambientales que estos sitios proveen, y consciente de su valor como ecosistemas, podrá defender la sustentabilidad de estos sitios."

"In 2017–2018, the Government of Mexico’s Navy Secretariat (SEMAR) carried out dredging activities in Bahía and Ensenada de La Paz, Baja California Sur. In parallel there were severe impacts on the Ramsar site “Humedales Mogote-Ensenada de La Paz”. The dredging and the mis management of the waste generated citizen concern for the site and their inhabiting organisms. Consequently, there were protests that were prosecuted both in the media and legally before SEMARNAT by some non-governmental organizations (ONGs). On October 3, 2019, indignation led to the organization of a Forum-Workshop to assess the problem of wetlands in Bahía and Ensenada de La Paz, included in the Ramsar Convention. Here we present a summary of the Workshop results that reflect the great concern for Ramsar sites, both from civil society, and from different government entities. The results were integrated into a document delivered in February 2020 only to the authorities of SEMARNAT, CONANP and to the Baja California Sur State Congress, because the advent of the Covid-19 pandemic prevented the delivery to all other institutions involved, identified as responsible in the Workshop. Participants observed a wide range of problems in these sites originated largely by residents and reinforced by non-compliance with commitments acquired by Mexico towards the Ramsar Convention, evident in the neglect of the Ramsar sites, in particular the Mogote-Ensenada de La Paz wetlands, where no specific regulation indicates the responsibility of the management of these ecosystems. In contrast, it was observed that the wetland of Balandra has special protection by being part of a Natural Protected Area (ANP, by its acronym in Spanish). The most important general conclusion of this event was that only a we- ll-organized society, informed of the environmental services that these sites provide, and aware of their value as ecosystems, will be able to defend the sustainability of these sites."

Gestión participativa, Dragados, Conservación humedales, Servicios Ecosistémicos, Mortandad delfines CIENCIAS AGROPECUARIAS Y BIOTECNOLOGÍA CIENCIAS AGRARIAS CIENCIA FORESTAL CONSERVACIÓN CONSERVACIÓN

Waterhole detection using a vegetation index in desert bighorn sheep (Ovis canadensis cremnobates) habitat

Jonathan Gabriel Escobar Flores (2019, [Artículo])

In arid ecosystems, desert bighorn sheep are dependent on natural waterholes, particularly in summer when forage is scarce and environmental temperatures are high. To detect waterholes in Sierra Santa Isabel, which is the largest area of desert bighorn sheep habitat in the state of Baja California, Mexico, we used the normalized difference vegetation index (NDVI) and normalized difference water index (NDWI) from Sentinel-2 satellite images. Waterhole detection was based on the premise that sites with greater water availability, where NDVI was higher, can be identified by their density of vegetation greenness. For the detected waterholes, we estimated the escape terrain (presence of cliffs or steep, rocky slopes) around each by the vector ruggedness measure to determine their potential use by desert bighorn sheep based on the animals’ presence as documented by camera traps. We detected 14 waterholes with the NDVI of which 11 were known by land owners and 3 were unrecorded. Desert bighorn were not detected in waterholes with high values of escape terrain, i.e., flat areas. Waterhole detection by NDVI is a simple method, and with the assistance and knowledge of the inhabitants of the Sierra, it was possible to confirm the presence each waterhole in the field. © 2019 Escobar-Flores et al. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.

Article, bighorn sheep, environmental aspects and related phenomena, environmental parameters, habitat, Mexico, nonhuman, normalized difference vegetation index, normalized difference water index, water availability, waterhole, animal, bighorn sheep, CIENCIAS AGROPECUARIAS Y BIOTECNOLOGÍA CIENCIAS AGRARIAS CIENCIA FORESTAL CIENCIA FORESTAL

Using Sentinel-2 to track field-level tillage practices at regional scales in smallholder systems

Preeti Rao ML JAT Balwinder-Singh Deepak Bijarniya Urs Schulthess Rajbir Singh Meha Jain (2021, [Artículo])

Sentinel-2 Random Forest Google Earth Engine CIENCIAS AGROPECUARIAS Y BIOTECNOLOGÍA SATELLITES ZERO TILLAGE CONVENTIONAL TILLAGE SMALLHOLDERS

Impact of automation on enhancing energy quality in grid-connected photovoltaic systems

Virgilio Alfonso Murillo Rodríguez NOE VILLA VILLASEÑOR José Manuel Robles Solís OA Guirette-Barbosa (2023, [Artículo])

Rapid growth in the integration of new consumers into the electricity sector, particularly in the industrial sector, has necessitated better control of the electricity supply and of the users’ op-erating conditions to guarantee an adequate quality of service as well as the unregulated dis-turbances that have been generated in the electrical network that can cause significant failures, breakdowns and interruptions, causing considerable expenses and economic losses. This research examines the characteristics of electrical variations in equipment within a company in the industrial sector, analyzes the impact generated within the electrical system according to the need for operation in manufacturing systems, and proposes a new solution through automation of the regulation elements to maintain an optimal system quality and prevent damage and equipment failures while offering a cost-effective model. The proposed solution is evaluated through a reliable simulation in ETAP (Energy Systems Modeling, Analysis and Optimization) software, which emulates the interaction of control elements and simulates the design of electric flow equipment operation. The results demonstrate an improvement in system performance in the presence of disturbances when two automation schemes are applied as well as the exclusive operation of the capacitor bank, which improves the total system current fluctuations and improves the power factor from 85.83% to 93.42%. Such a scheme also improves the waveform in the main power system; another improvement result is when simultaneously operating the voltage and current filter together with the PV system, further improving the current fluctuations, improving the power factor from 85.83% to 94.81%, achieving better stability and improving the quality of the waveform in the main power grid.

This article belongs to Special Issue Advances and Optimization of Electric Energy System.

Power quality Capacitor bank Voltage and current filter Photovoltaic system INGENIERÍA Y TECNOLOGÍA CIENCIAS TECNOLÓGICAS OTRAS ESPECIALIDADES TECNOLÓGICAS OTRAS OTRAS

Diseño y desarrollo de dispositivo de sujeción hidráulica para el proceso de brochado

Design and development of hydraulic clamping device for broaching process

Jorge Morales Carlos Álvarez Raúl Pérez Bustamante (2023, [Artículo])

Se desarrollo un dispositivo de sujeción hidráulica para el proceso de brochado de Brackets usados en los sistemas de frenado de automóviles, que permite reducir la variación del proceso de corte al mejorar el sistema de sujeción y con ello limitar la deformación de la pieza luego de haber sido procesada. Con este concepto de dispositivo es posible mejorar las condiciones del proceso de producción, como lo son: velocidad de corte, reducción de tiempo ciclo, rendimiento de la operación, reducción de costo de scrap, y reducción de tiempo muerto por sobre ajuste de proceso y cambio de modelo. Adicional, se hizo el desarrollo de un sistema de detección de pieza presente que permite captar cuando una pieza no es colocada correctamente en el dispositivo antes de iniciar el ciclo de corte, con esto es posible detectar fallas en el proceso que representen un riesgo para la operación. Durante la etapa de diseño se realizó una simulación del proceso de maquinado en condiciones extremas y condiciones ideales para medir la deformación de la pieza y con esto obtener los parámetros adecuados de corte para la puesta en marcha del dispositivo de sujeción. Para la validación del modelo, se realizó un estudio de habilidad de proceso Cpk y Ppk (acorde a los requerimientos de cliente) para evaluar que el nuevo proceso es eficiente y se encuentra bajo control.

A hydraulic clamping device was developed for the broaching process of Brackets used in automotivebraking systems, which allows reducing the variation of the cutting process by improving the clamping system andthereby limiting the deformation of the piece after having been processed. With this concept of device, it is possibleto improve the conditions of the production process such as: cutting speed, cycle time reduction, operationperformance, scrap cost reduction, and downtime reduction due to process over-adjustment and change over.Additionally, the development of a part detection system was made that allows capturing when a part is not correctlyplaced in the device before starting the cutting cycle, with this it is possible to detect failures in the process thatrepresent a risk to the operation. During the design stage, a simulation of the machining process was carried outin extreme conditions and ideal conditions to measure the deformation of the part and with this obtain theappropriate cutting parameters for the implementation of the clamping device. For the validation of the model, aCpk and Ppk process ability study was carried out (according to customer requirements) to assess that the newprocess is efficient and is under control.

Agradecemos al Centro de Investigación y Asistencia Técnica del Estado de Querétaro, A.C. (CIATEQ) y a la empresa donde fue desarrollado el proyecto por todas las facilidades otorgadas para la realización de dicho proyecto, de igual manera, agradecer por el apoyo brindado a todas las personas involucradas directa o indirectamente en el desarrollo de este trabajo.

Agradecimientos de autoría: Jorge Alberto Morales Martínez: Conceptualización; Metodología; Software; Análisis formal; Investigación; Adquisición de fondos; Recursos; Análisis de datos; Borrador original; Administración de proyecto, Revisión y edición. Carlos Marín: Conceptualización; Ideas; Análisis de datos; Software; Análisis formal y Supervisión. Raúl Pérez Bustamante: Revisión y edición.

Dispositivo de sujeción Proceso de brochado Bracket Sistema de frenado Parámetros de corte Cpk Ppk Clamping device Broaching process Brake system Cutting parameters INGENIERÍA Y TECNOLOGÍA CIENCIAS TECNOLÓGICAS OTRAS ESPECIALIDADES TECNOLÓGICAS OTRAS OTRAS

Core partners kick-off meeting─Ukama Ustawi (UU): Diversification for Resilient Agrifood systems in East and Southern Africa (ESA)

Evan Girvetz Christian Thierfelder Iddo Dror (2022, [Objeto de congreso])

CIENCIAS AGROPECUARIAS Y BIOTECNOLOGÍA AGRICULTURE FOOD SYSTEMS DIVERSIFICATION RESILIENCE

MLN disease diagnostics, MLN disease-free seed production and MLN disease management

Suresh L.M. (2022, [Objeto de congreso])

CIENCIAS AGROPECUARIAS Y BIOTECNOLOGÍA DISEASES DISEASE MANAGEMENT SEED PRODUCTION MAIZE NECROSIS YIELD LOSSES ECONOMIC IMPACT SURVEILLANCE SYSTEMS TRAINING

Redesigning crop varieties to win the race between climate change and food security

Kevin Pixley Jill Cairns Santiago Lopez-Ridaura Chris Ojiewo Baloua Nébié Godfrey Asea Biswanath Das Benoit Joseph Batieno Clare Mukankusi Sarah Hearne Kanwarpal Dhugga Sieglinde Snapp Ernesto Adair Zepeda Villarreal (2023, [Artículo])

Crop Breeding Expert Survey CIENCIAS AGROPECUARIAS Y BIOTECNOLOGÍA CLIMATE CHANGE CROPPING SYSTEMS FOOD SECURITY CROPS

Review of Nationally Determined Contributions (NCD) of Kenya from the perspective of food systems

Tek Sapkota (2023, [Documento de trabajo])

Agriculture is one of the fundamental pillars of the 2022–2027 Bottom-up Economic Transformation Plan of the Government of Kenya for tackling complex domestic and global challenges. Kenya's food system is crucial for climate change mitigation and adaptation. Kenya has prioritized aspects of agriculture, food, and land use as critical sectors for reducing emissions towards achieving Vision 2030's transformation to a low-carbon, climate-resilient development pathway. Kenya's updated NDC, as well as supporting mitigation and adaptation technical analysis reports and other policy documents, has identified an ambitious set of agroecological transformative measures to promote climate-smart agriculture, regenerative approaches, and nature-positive solutions. Kenya is committed to implementing and updating its National Climate Change Action Plans (NCCAPs) to present and achieve the greenhouse gas (GHG) emission reduction targets and resilience outcomes that it has identified.

CIENCIAS AGROPECUARIAS Y BIOTECNOLOGÍA CLIMATE CHANGE GREENHOUSE GAS EMISSIONS FOOD SYSTEMS LAND USE CHANGE AGRICULTURE POLICIES DATA ANALYSIS FOOD WASTES