Búsqueda avanzada


Área de conocimiento




Filtrar por:

Tipo de publicación

Autores

Años de Publicación

Editores

Repositorios Orígen

Tipos de Acceso

Idiomas

Materias

Selecciona los temas de tu interés y recibe en tu correo las publicaciones más actuales

99 resultados, página 1 de 10

Entretejiendo la historia biocultural del Agave cocui (Asparagaceae: Agavoideae) en Venezuela

SILVIA GOMEZ RANGEL (2022, [Artículo])

La presente contribución es un acercamiento a la historia biocultural del Agave cocui Trelease. En la América tropical (Neotrópico), pueblos indígenas y comunidades rurales evidencian una milenaria riqueza de conocimientos en el manejo y aprovechamiento de especies nativas. Sin embargo, los datos sobre A. cocui son fragmentarios e imprecisos. Desde la condición diacrónica de la antropología, son enunciadas y confrontadas diversas líneas de evidencias, a partir de la temprana descripción de Galeotto Cey en el siglo XVI y los orígenes amerindios de su nombre vernáculo. Revitalizar los conocimientos tradicionales sobre la especie contribuiría a mitigar eventuales impactos ambientales y a su aprovechamiento integral y sostenible.

ALIMENTO BEBIDA FERMENTADA CAQUETIO CORMO HORNEADO SUR AMERICA VICUYES BIOLOGÍA Y QUÍMICA CIENCIAS DE LA VIDA BIOLOGÍA VEGETAL (BOTÁNICA) ECOLOGÍA VEGETAL ECOLOGÍA VEGETAL

El duraznillo (Tapirira mexicana): una especie comestible poco conocida

Leonardo Díaz Sánchez CESAR ISIDRO CARVAJAL HERNANDEZ ELIA NORA AQUINO BOLAÑOS MARIA DEL SOCORRO HERRERA MEZA (2023, [Artículo])

Tapirira mexicana es un árbol de la familia Anacardiaceae (familia del mango), que se conoce como “duraznillo” o “huichini” (entre otros nombres comunes). En algunos lugares de México se consume la semilla como alimento secundario. Las semillas contienen ácidos grasos poliinsaturados y monoinsaturados cuyo potencial alimenticio y efectos en el organismo humano se desconocen. Resaltamos la importancia de Tapirira mexicana, en particular el consumo de sus semillas, una especie comestible que es poco valorada y reconocida en México.

ALIMENTO ANACARDIACEAE DURAZNILLO ESPECIE MEXICANA SEMILLAS BIOLOGÍA Y QUÍMICA CIENCIAS DE LA VIDA BIOLOGÍA VEGETAL (BOTÁNICA) ECOLOGÍA VEGETAL ECOLOGÍA VEGETAL

El amaranto o huauhtli sagrado del México prehispánico y alimento de alto valor nutricional del México contemporáneo

JESUS ALFREDO ARAUJO LEON Ivonne Sánchez del Pino Víctor Aguilar Hernández SERGIO RUBEN PERAZA SANCHEZ ROLFFY RUBEN ORTIZ ANDRADE ANDRES XINGU LOPEZ Ligia Guadalupe Brito Argáez J. NAHIM ALCOCER ESPEJEL (2023, [Artículo])

El amaranto o huauhtli es uno de los alimentos más versátiles y nutritivos del continente americano. Los frailes españoles documentaron en sus crónicas del siglo XVI, la amplia variedad de platillos que los mexicas elaboraban con huauhtli. También destaca la importancia de las semillas de amaranto en las prácticas religiosas y su uso en la elaboración de imágenes sagradas (principalmente comestibles) para los dioses. El amaranto fue importante para la agricultura, la gastronomía y los rituales del México antiguo. El presente ensayo documenta la historia del amaranto en las ceremonias mexicas y su importancia como "súper alimento" en la actualidad

AMARANTHUS HYPOCHONDRIACUS ALEGRIAS SUPER ALIMENTO MEXICAS HERENCIA PREHISPANICA BIOLOGÍA Y QUÍMICA CIENCIAS DE LA VIDA BIOLOGÍA VEGETAL (BOTÁNICA) ECOLOGÍA VEGETAL ECOLOGÍA VEGETAL

Tratamiento del análisis de funciones en el bachillerato. propuesta de una ingeniería didáctica.

NOE OSWALDO CABAÑAS RAMIREZ (2020, [Tesis de doctorado])

La presente investigación reporta el tema de análisis de funciones, cuyo tratamiento se observa en el Nivel Medio Superior y los primeros años de Universidad (en México), tópico fundamental en el estudio del Cálculo en estos niveles. Su importancia en la enseñanza y aprendizaje de las matemáticas reside, en que es un tema que aparece dentro de los planes y programas de estudio y es marcado como obligatorio para su enseñanza (COSDAC-SEMS, 2013; UAGro, 2010)(Ver anexo); además, es un contenido integrador donde convergen y se necesitan todos los conocimientos que el alumno ha construido a través de los diferentes niveles educativos en su proceso de formación, así como una madurez de razonamiento matemático en los alumnos para poder entender y aplicar los teoremas y resultados que fundamentan este análisis.

CIENCIAS FÍSICO MATEMÁTICAS Y CIENCIAS DE LA TIERRA MATEMÁTICAS ANÁLISIS Y ANÁLISIS FUNCIONAL

Las patologías de los recubrimientos en muros y su repercusión en la salud respiratoria de los usuarios

Rosario Tovar (2023, [Tesis de doctorado])

251 páginas. Doctorado en Diseño Bioclimático.

El nivel de calidad del aire interior (CAI) tiene incidencia directa en la salud humana, por eso, es objeto de estudio del diseño bioclimático, toda vez que éste promueve el aprovechamiento de los factores ambientales para la creación y acondicionamiento de espacios en los que los usuarios experimenten confort y bienestar. Además, de impulsar la construcción con sentido común, en donde prevalezca el uso racional de los recursos y una baja dependencia energética. En la presente tesis se pudieron identificar las propiedades de los materiales más comunes que conforman los recubrimientos de muros (cal, cemento, mortero de cemento y yeso) para reconocer los que mejor se adaptan al clima en la Cd. de México, mismos que según se pudo constatar, contribuyen en el control de algunos factores de riesgo (físico: humedad, químico: tóxicos y biológico: microbios) relacionados con una baja calidad del aire al interior de las viviendas. Tal función mitiga o reduce la aparición de algunos de los padecimientos respiratorios más frecuentes en los usuarios como: alergias, asma, rinitis, gripe y sinusitis. Los análisis a los que fueron sometidos los recubrimientos de cuatro materiales ligantes, permitieron evaluar su desempeño ante factores ambientales semi-controlados (temperatura, humedad relativa y concentración de dióxido de carbono) inherentes al funcionamiento del propio espacio interior y al lugar de emplazamiento del mismo. Obviamente, todos los recubrimientos reaccionaron de forma distinta y acorde con las propiedades físicas y químicas de los materiales presentes en cada uno de ellos. Siendo las variaciones más representativas y satisfactorias, las relacionadas con la permeabilidad y el efecto biocida de los recubrimientos hechos con mezcla de cal. Las patologías que mostraron algunos recubrimientos a lo largo del periodo de monitoreo, debido a la insuficiente gestión de la humedad, al alto desarrollo microbiano y a la naturaleza química del material ligante, fueron criptoeflorescencias, moho, bacterias y desprendimiento/diseminación de partículas; mismas que se consideraron definitorias para establecer que al igual que los seres vivos, los materiales de construcción necesitan rangos higrotérmicos específicos, que permitan su óptimo estado de operación. En apego a lo anteriormente citado, es que se considera conveniente concientizar a la población en temas tan importantes para el bienestar social, como la selección de materiales y -consecuente- conservación de los recubrimientos de muros, no sólo para disminuir los costos de ejecución y mantenimiento, sino para aprovechar sus propiedades, ya que tienen una incidencia directa en lo relacionado con el control de las condiciones ambientales básicas, la regulación de la calidad del aire interior y por ende, en la salud de los usuarios. Dicha labor puede iniciar en la etapa formativa de los profesionales de la construcción, con la intención de normalizar el estudio o correcta selección de los sistemas constructivos en función del clima, pero también identificando la función de cada espacio; para garantizar así, que las propuestas de diseño responderán -satisfactoriamente- a los requerimientos de regulación de la humedad, mediante su absorción, transpiración y/o evaporación.

The level of indoor air quality (IAQ) has a direct incidence on the human health, therefore, is the object of study of bioclimatic design, since it promotes the harnessing environmental factors for the creation and conditioning of spaces in which users experience comfort and well-being. In addition, to encourage construction with common sense, where the rational use of resources and low energy dependence prevail. In this thesis it has been identified the properties of the materials that make up the most common wall coverings (hydrated lime, cement, cement mortar and gypsum) for recognizing those that best adapt to the weather in Mexico City, as it could be verified, they contribute to the control of some risk factors (physical:moisture, chemical:toxics and biological:microbes) related with a low indoor air quality at dwellings. This function mitigates or reduces the appearance of some of the most frequent respiratory ailments in users such as: allergies, asthma, rhinitis, flu and sinusitis. The analyses to which the coatings of four binding materials were subjected, allowed to evaluate their performance in the face of semi-controlled environmental factors (temperature, relative humidity, and carbon dioxide concentration) inherent to the operation of the interior space itself and the place of its location. Obviously, all the coatings reacted differently and according with the physical and chemical properties of the materials in each of them. Being the most representative and satisfactory variations, those related to the permeability and biocidal effect of coatings made with hydrated lime mixture. The pathologies that some coatings showed throughout the monitoring period, due to insufficient moisture management, the high microbial development, and the chemical nature of the binding material, were cryptoefflorescences, mold, bacteria and particle shedding/dissemination; they were defining to establish that in similar way to living beings, building materials need specific hygrothermal ranges, to let them works in an optimal state. According with the above, it is considered convenient to raise awareness among the population on issues as important for social welfare, such as the selection of materials and -consequently- conservation of wall coverings, not only to reduce the costs of execution and maintenance, but to take advantage of their properties, since they have a direct incidence in all related with the control of basic environmental conditions, the regulation of indoor air quality and therefore, in users’ health. This work can begin in the formative stage of construction professionals, with the intention of standardizing the study or correct selection of construction systems depending on the weather, but also identifying the function of each space; to guarantee that the design proposals will respond -satisfactorily- to the requirements of humidity regulation, through its absorption, transpiration and/or evaporation.

Muro, recubrimientos, patologías, salud. Wall, coating, pathologies, health. Indoor air pollution--Health aspects. Architecture--Health aspects. Interior walls. Protective coatings. Lime as a disinfectant. Building materials. Communicable diseases--Transmission--Prevention. Contaminación del aire interior. Muros interiores. Revestimientos. Cal como desinfectante. RA577.5 HUMANIDADES Y CIENCIAS DE LA CONDUCTA CIENCIAS DE LAS ARTES Y LAS LETRAS ARQUITECTURA DISEÑO ARQUITECTÓNICO

Estimación espacio-temporal de la carga hidráulica utilizando el concepto de función aleatoria espacio-tiempo

EDGAR YURI MENDOZA CAZARES GRACIELA DEL SOCORRO HERRERA ZAMARRON (2010, [Artículo])

En este trabajo se presenta un método geoestadístico para realizar estimaciones espacio-temporales y se aplica a la estimación de la carga hidráulica del acuífero de Querétaro-Obrajuelo en el periodo 1981-2004. Las estimaciones para los años 1993, 1995 y 1999 se comparan con las de los métodos de krigeado ordinario y krigeado multivariado, utilizando el método de validación cruzada, reportándose los valores del error medio, error cuadrático medio y error cuadrático medio estándar. Los resultados de las varianzas del valor estimado son siempre más pequeños utilizando el método espacio-temporal, ya que utiliza más información para la estimación; asimismo, es posible hacer las estimaciones en todo el espacio para todos los tiempos. Se concluyó que la herramienta es poderosa, porque considera toda la información disponible al efectuar las estimaciones.

Análisis multivariado Carga hidráulica Geoestadística Querétaro CIENCIAS FÍSICO MATEMÁTICAS Y CIENCIAS DE LA TIERRA

Análisis espectral de consumo doméstico de agua potable

Felipe Arreguin ALVARO ALBERTO ALDAMA RODRIGUEZ Velitchko Tzatchkov VICTOR HUGO ALCOCER YAMANAKA HECTOR ALEXIS ESPINOSA GAYOSSO (2009, [Artículo])

Una de las variables con mayor incertidumbre en su comportamiento dentro del análisis hidráulico de las redes de agua potable es el consumo de agua proveniente de los usuarios. Recientemente, se ha demostrado que el consumo en el ámbito domiciliario tiene un carácter estocástico y se han desarrollado diferentes metodologías que intentan representar esta variable. Sin embargo, no es posible definir con exactitud dos situaciones: 1) el grado de información que se pierde al muestrear la señal con cierto intervalo de registro y la posible presencia de enmascaramiento (aliasing); y 2) la frontera (rango) en el tiempo, en el cual pueden aplicarse estos procesos de agregación y desagregación temporal. El proceso basado en el análisis de Fourier se puede aplicar como herramienta de desagregación temporal y obtener el intervalo de registro óptimo de medición en campo. A partir de la metodología, se obtuvo que el rango de aplicación del esquema está entre los 240 y 1 segundos. En otras palabras, es posible medir con intervalo de registro hasta 240 segundos y recuperar información con intervalo de registro de un segundo. El método se validó con mediciones en campo de consumo doméstico realizadas en una ciudad mexicana.

Análisis espectral Consumo doméstico de agua Modelos estocásticos INGENIERÍA Y TECNOLOGÍA

A Novel Technique for Classifying Bird Damage to Rapeseed Plants Based on a Deep Learning Algorithm.

Ali Mirzazadeh Afshin Azizi Yousef Abbaspour_Gilandeh José Luis Hernández-Hernández Mario Hernández Hernández Iván Gallardo Bernal (2021, [Artículo])

Estimation of crop damage plays a vital role in the management of fields in the agricultura sector. An accurate measure of it provides key guidance to support agricultural decision-making systems. The objective of the study was to propose a novel technique for classifying damaged crops based on a state-of-the-art deep learning algorithm. To this end, a dataset of rapeseed field images was gathered from the field after birds¿ attacks. The dataset consisted of three classes including undamaged, partially damaged, and fully damaged crops. Vgg16 and Res-Net50 as pre-trained deep convolutional neural networks were used to classify these classes. The overall classification accuracy reached 93.7% and 98.2% for the Vgg16 and the ResNet50 algorithms, respectively. The results indicated that a deep neural network has a high ability in distinguishing and categorizing different image-based datasets of rapeseed. The findings also revealed a great potential of Deep learning-based models to classify other damaged crops.

rapeseed classification damaged crops deep neural networks INGENIERÍA Y TECNOLOGÍA CIENCIAS TECNOLÓGICAS TECNOLOGÍA DE LOS ALIMENTOS

Classification of Cucumber Leaves Based on Nitrogen Content Using the Hyperspectral Imaging Technique and Majority Voting.

Sajad Sabzi Razieh Pourdarbani Mohammad Hossein Rohban Alejandro Fuentes_Penna José Luis Hernández-Hernández Mario Hernández Hernández (2021, [Artículo])

Improper usage of nitrogen in cucumber cultivation causes nitrate accumulation in the fruit and results in food poisoning in humans; therefore, mandatory evaluation of food products becomes inevitable. Hyperspectral imaging has a very good ability to evaluate the quality of fruits and vegetables in a non-destructive manner. The goal of the present paper was to identify excess nitrogen in cucumber plants. To obtain a reliable result, the majority voting method was used, which takes into account the unanimity of five classifiers, namely, the hybrid artificial neural network¿imperialism competitive algorithm (ANN-ICA), the hybrid artificial neural network¿harmonic search (ANN-HS) algorithm, linear discrimination analysis (LDA), the radial basis function network (RBF), and the Knearest- neighborhood (KNN). The wavelengths of 723, 781, and 901 nm were determined as optimal wavelengths using the hybrid artificial neural network¿biogeography-based optimization (ANNBBO) algorithm, and the performance of classifiers was investigated using the optimal spectrum. The results of a t-test showed that there was no significant difference in the precision of the algorithm when using the optimal wavelengths and wavelengths of the whole range. The correct classification rate of the classifiers ANN-ICA, ANN-HS, LDA, RBF, and KNN were 96.14%, 96.11%, 95.73%, 64.03%, and 95.24%, respectively. The correct classification rate of majority voting (MV) was 95.55% for test data in 200 iterations, which indicates the system was successful in distinguishing nitrogen-rich leaves from leaves with a standard content of nitrogen.

artificial neural network cucumber hyperspectral imaging majority voting nitrogen INGENIERÍA Y TECNOLOGÍA CIENCIAS TECNOLÓGICAS TECNOLOGÍA DE LOS ALIMENTOS

Microbiological Analysis of the Air in a Popular Fish Processing and Marketing Area

Angélica Sinaí Quintanilla Martínez Lizet Aguirre Güitrón Luis Daniel Espinosa Chaurand MAYRA DIAZ RAMIREZ ALEJANDRO DE JESUS CORTES SANCHEZ (2022, [Artículo])

"Fish are marketed as a food and consumed worldwide. During the production of food, contamination by microorganisms is possible through the air, soil, water, surfaces, food handlers, etc. The air does not have a natural microbial composition, but it is a vehicle for the transmission of microorganisms of economic and health interest because they are associated with food spoilage and human diseases. The objective of this study was the microbiological analysis of the air in an area popular for the processing and marketing of fish products in the city of Tepic Nayarit. Using the passive or sedimentation method to collect microorganisms present in the air, the proportion of aerobic mesophile bacteria, coliform bacteria, fungi and yeast was determined at different locations in the fish processing and marketing area for four weeks. The results indicated that the aerobic mesophiles had the highest counts among all the microbial groups analyzed at the twelve different sampling points during the four weeks of the study; their numbers ranged from 2.44 to 2.95 log CFU/m3/h, followed by molds with counts from 1.44 to 2.75 log CFU/m3/h, yeasts with counts from 0.7 to 2.01 log CFU/m3/h and coliforms with counts that ranged from 0.7 to 1.68 log CFU/m3/h. We determined the proportion of the viable microbiological population present in the air at the different sampling points of the study area; several of these sampling points presented values above those recommended by various agencies around the world. Knowledge of the biological hazards transported through the air is important to establish and reduce the risk to the health of occupants and the contamination pathways of processed and marketed fishery products that may be associated with spoilage and foodborne diseases."

food safety, food quality, air pollution, airborne biohazard, environmental monitoring INGENIERÍA Y TECNOLOGÍA CIENCIAS TECNOLÓGICAS TECNOLOGÍA DE LOS ALIMENTOS HIGIENE DE LOS ALIMENTOS HIGIENE DE LOS ALIMENTOS