Búsqueda avanzada


Área de conocimiento




64 resultados, página 2 de 7

Cambio climático: percepciones sobre manifestaciones, causas e impactos en el distrito de temporal tecnificado Margaritas-Comitán, Chiapas

DENISE SOARES ANTONINO GARCIA GARCIA LUIS RICARDO MANZANO SOLIS (2018, [Artículo])

Se exploran percepciones acerca de las manifestaciones del cambio climático, sus causas e impactos en el cotidiano de actores sociales locales en el Distrito de Temporal Tecnificado Margaritas-Comitán (DTT011) ubicado en la Meseta Comiteca, estado de Chiapas, perteneciente a la parte alta de la cuenca del río Usumacinta. Asimismo, se propone argumentar con base en información empírica que, independiente de la aprehensión del concepto de cambio climático, a nivel local se observa, interpreta y siente el impacto de las variaciones en los periodos de lluvia y del incremento del calor, las cuales presentan consecuencias en términos económicos en la zona, toda vez que los sistemas productivos se ven afectados y se pierden cosechas.

Cambio climático Sistemas productivos Vulnerabilidad CIENCIAS SOCIALES

RELACIONES SOCIALES Y TRABAJO EMOCIONAL EN EL ENTRAMADO DE LOS PROCESOS DE SALUD, ENFERMEDAD Y ATENCIÓN: EL CASO DE LAS CONSTELACIONES FAMILIARES EN MÉXICO

CLARA LUZ VILLANUEVA AGUILAR (2024, [Tesis de doctorado])

“Las constelaciones familiares (en adelante CF), como una modalidad o método terapéutico, han tenido un crecimiento importante en las últimas décadas, una muestra concreta es que diferentes plataformas de streaming tienen series completas que se focalizan en las CF o que al menos las presentan como una modalidad terapéutica en boga. Cuando se hace una búsqueda en internet, Google arroja cientos de respuestas, entre ellas: centros de CF, publicaciones, así como diferentes alcaldías de la CDMX, aparecen anuncios de centros de CF incluidas sus actividades. Este hecho en sí es un fenómeno social que es pertinente estudiar, más aún cuando el desarrollo de esta psicoterapia se acrecentó durante el confinamiento a causa de la pandemia por COVID 19, a partir del uso de recursos terapéuticos y digitales, lo cual fue novedoso y también indispensable para la continuidad de su desarrollo. En este sentido, nos interesó comprender qué objetivos llevan a lxs consultantes a utilizar esta terapéutica, cuáles son sus necesidades de salud física, mental y emocional y si están encontrando en esta psicoterapia una eficacia empírica y/o simbólica por la cual los grupos CF están creciendo sostenidamente, aun durante el confinamiento. También consideramos relevante comprender cuáles son los elementos más y menos cuestionables de este tipo de terapia para consultantes y curadorxs, tomando en cuenta que su auge no solo está relacionado a aspectos positivos, ya que existen otros elementos que están en juego en el desarrollo de todo método terapéutico. Consideramos que un aspecto fundamental en el estudio del crecimiento de esta terapéutica, es la descripción y el análisis comparativo entre las características y funciones de las CF en relación con las características y funciones de la biomedicina, desde la perspectiva de los actores involucrados; ya que por un lado, la búsqueda de atención a la salud en forma integral”.

Familias - Aspectos psicológicos. Sistemas sociales. Enfermos - Relaciones familiares. Terapia sistémica (Terapia familiar). Teoría de las constelaciones familiares. Tesis - Doctorado en Antropología, CDMX. CIENCIAS SOCIALES SOCIOLOGÍA PROBLEMAS SOCIALES ENFERMEDAD ENFERMEDAD

Thermal and mechanical properties of PLA-based multiscale cellulosic biocomposites

MIGUEL ANGEL RUZ CRUZ Pedro Jesús Herrera Franco Emmanuel Alejandro Flores Johnson MARIA VERONICA MORENO CHULIM LUCIANO MIGUEL GALERA MANZANO Alex Valadez González (2022, [Artículo])

In this work polylactic acid (PLA) based multiscale cellulosic biocomposites were prepared with the aim to evaluate the effect of the incorporation of cellulose nanocrystals (CNCs) on the PLA biocomposites reinforced with cellulose microfibers (MFCs). For this, PLA composite materials reinforced with both MFCs and with a combination of MFCs and CNCs were prepared, while keeping the content of cellulosic reinforcements constant. The thermal and mechanical properties of these multiscale PLA biocomposites were characterized by thermogravimetry (TGA), differential scanning calorimetry (DSC), flexural mechanical and, dynamic mechanical (DMA) tests. Likewise, they were characterized by Fourier transform infrared spectroscopy (FTIR) and scanning electron microscopy (SEM). The results show that the replacement of MFCs by CNCs in the 1–5% range appreciably modifies the thermal and mechanical properties of multiscale compounds. For example, they increase the thermal stability of the materials, modify the PLA crystallization process and play the role of adhesion promoters since the mechanical properties in flexure increase in the order of 40% and the storage modulus increases in the order of 35% at room temperature. Also, the addition of CNCs increases the relaxation temperature of the material from 50 to 60 °C, thereby expanding the temperature range for its use. © 2022 The Author(s)

MULTISCALE BIOCOMPOSITES CELLULOSE MICROFIBER CELLULOSE NANOCRYSTALS HIERARCHICAL STRUCTURE PROPERTIES INGENIERÍA Y TECNOLOGÍA CIENCIAS TECNOLÓGICAS TECNOLOGÍA DE MATERIALES PROPIEDADES DE LOS MATERIALES PROPIEDADES DE LOS MATERIALES

Synthesis of Ferroelectric and Multiferroics Thin films of BiMnO3/ SrTiO3 and Structural, Piezoelectric, Magnetic, Optical, and Mechanical Properties Characterization

Glory Valentine Umoh (2022, [Tesis de doctorado])

Multiferroic characteristics of BiMnO3 thin films offer great prospects to explore, either

in terms of ferroelectricity, ferromagnetism, or ferroelasticity. Ferroelectric and

ferromagnetic materials can be used in data storage due to their electrical and magnetic

properties. Ferroelastic can find its application in microelectromechanical systems

devices. This dissertation focused on the synthesis, characterization, and improvement of

the multiferroic properties of polycrystalline BiMnO3 thin films as well as the elaboration

influence of Cu on the magnetism of BiMnO3 thin films. BiMnO3 films were grown on

three different substrates, Si (001), Pt-buffered Si (001), Nb-doped SrTiO3 (100), and also

doped with different amounts of Cu. The films were characterized using techniques such

as X-Ray diffraction (XRD), scanning electron microscope (SEM), HRTEM

observations, by energy-dispersive X-ray spectroscopy (EDS), atomic force microscopy

(AFM), X-ray photoelectron spectroscopy (XPS), Raman spectroscopy, Visible-near-IR

spectroscopy (Vis-NIR), electron energy loss spectrometer (EELS), nanoindenter,

superconductor quantum interference device (SQUID) magnetometer, and finally, the

polarization-electric field (P-E) hysteresis loops of the BiMnO3 thin films were conducted

at 200 and 300 K. There are several studies on the growth of thin films, however, they are

not clear and in some cases contradictory, therefore, different parameters were controlled

during the deposition in terms of working pressure, RF power, substrate, deposition

10

temperature, and target to substrate distance. After deposition ex-situ thermal treatment

was carried out in order to compensate for the volatility of bismuth and also to eliminate

secondary phase.

Kramer’s–Krӧnig analysis was used to determine bandgap, via a polynomial fit in the

energy loss function (ELF) plot with an Eg = 1.63 eV, complex dielectric function, and

static dielectric constant, ε* = 4.68 of the grown BiMnO3 thin films. The reflection

coefficient Ґl of the BiMnO3 thin films was used to elucidate the reflection loss in the

BiMnO3 thin films. XPS analysis revealed the existence of Mn charge transition of 3+

and 4+ states. Resistivity result describes BIMnO3 as a semiconductor. The

nanomechanical characterization demonstrated that the region of penetration depth was

below 10% of BiMnO3 film thickness. Young's modulus (E), hardness (H), and Stiffness

(S) were measured to be 142 ± 3 GPa, 8 ± 0.2 GPa, and 44072 ± 45 N/m respec

SÍNTESIS DE MATERIALES Materiales Multiferroicos CIENCIAS FÍSICO MATEMÁTICAS Y CIENCIAS DE LA TIERRA FÍSICA OTRAS ESPECIALIDADES FÍSICAS OTRAS OTRAS

Do provisioning ecosystem services change along gradients of increasing agricultural production?

Ronju Ahammad Stephanie Tomscha Sarah Gergel Frédéric Baudron Jean-Yves Duriaux Chavarría Samson Foli Dominic Rowland Josh Van Vianen Terence Sunderland (2024, [Artículo])

Context: Increasing agricultural production shapes the flow of ecosystem services (ES), including provisioning services that support the livelihoods and nutrition of people in tropical developing countries. Although our broad understanding of the social-ecological consequences of agricultural intensification is growing, how it impacts provisioning ES is still unknown. Objectives: We examined the household use of provisioning ES across a gradient of increasing agricultural production in seven tropical countries (Bangladesh, Burkina Faso, Cameroon, Ethiopia, Indonesia, Nicaragua and Zambia). We answered two overarching questions: (1) does the use of provisioning ES differ along gradients of agriculture production ranging from zones of subsistence to moderate and to high agriculture production? and (2) are there synergies and/or trade-offs within and among groups of ES within these zones? Methods: Using structured surveys, we asked 1900 households about their assets, livestock, crops, and collection of forest products. These questions allowed us to assess the number of provisioning ES households used, and whether the ES used are functionally substitutable (i.e., used similarly for nutrition, material, and energy). Finally, we explored synergies and trade-offs among household use of provisioning ES. Results: As agricultural production increased, provisioning ES declined both in total number and in different functional groups used. We found more severe decreases in ES for relatively poorer households. Within the functional groups of ES, synergistic relationships were more often found than trade-offs in all zones, including significant synergies among livestock products (dairy, eggs, meat) and fruits. Conclusions: Considering landscape context provides opportunities to enhance synergies among provisioning services for households, supporting resilient food systems and human well-being.

Agricultural Production Zones Agricultural Intensifcation Synergies and Trade-Offs Landscape Multifunctionality Social-Ecological Systems CIENCIAS AGROPECUARIAS Y BIOTECNOLOGÍA AGRICULTURE INTENSIFICATION ECOSYSTEM SERVICES LANDSCAPE SOCIAL-ECOLOGICAL RESILIENCE ECOSYSTEM SERVICES

Narrativas de la transgresión : afectos y emociones en los crímenes de odio contra mujeres lesbianas en México

Ytzel Maya (2022, [Tesis de maestría])

"El objetivo principal de esta tesis es analizar cómo se configuran los afectos en la legitimación del odio en los casos de crímenes de odio de mujeres lesbianas en México y qué relación tiene con la configuración de una narrativa política de los efectos (repugnancia, vergüenza y estigma) dentro del Estado".

Violencia contra las mujeres; México; Crímenes de odio; Aspectos sociales; Lesbianismo; Lesiones y agresión; Discriminación CIENCIAS SOCIALES CIENCIA POLÍTICA SISTEMAS POLÍTICOS SISTEMAS POLÍTICOS

Evaluación del desempeño climático de un invernadero baticenital del centro de México mediante dinámica de fluidos computacional (CFD)

Climate performance evaluation of a greenhouse in central Mexico using computational fluid dynamics (CFD)

JORGE FLORES VELAZQUEZ ENRIQUE MEJIA SAENZ IRINEO LORENZO LOPEZ CRUZ (2014, [Artículo])

Una de las principales actividades económicas en México es la producción de hortalizas para satisfacer el mercado estadounidense y la superficie cultivada en ambiente protegido aumenta alrededor de 20 % anualmente. Pero la producción es restringida debido a temperaturas altas y bajas en periodos específicos, planteando la necesidad de un sistema de enfriamiento. La ventilación natural eficiente es un método efectivo para controlar el clima, pero su descripción es compleja y una simplificación demanda mayor conocimiento del proceso. El objetivo del presente estudio fue mostrar, mediante el planteamiento y la solución del modelo físico de movimiento del aire, la representación visual del flujo en un invernadero baticenital de 10 naves (110×90×4.7), típico del centro de México, y la distribución de temperaturas en el interior donde se simula un cultivo de tomate (Lycopersicon esculentum Mill.) totalmente desarrollado (IAF=4).

Invernaderos Clima Energía eólica Sistemas de computación INGENIERÍA Y TECNOLOGÍA