Maintenance of Coastal Surface Blooms by Surface Temperature Stratification and Wind Drift

MARY CARMEN RUIZ DE LA TORRE (2013, [Artículo])

Algae blooms are an increasingly recurrent phenomenon of potentially socio-economic impact in coastal waters globally and in the coastal upwelling region off northern Baja California, Mexico. In coastal upwelling areas the diurnal wind pattern is directed towards the coast during the day. We regularly found positive Near Surface Temperature Stratification (NSTS), the resulting density stratification is expected to reduce the frictional coupling of the surface layer from deeper waters and allow for its more efficient wind transport. We propose that the net transport of the top layer of approximately 2.7 kilometers per day towards the coast helps maintain surface blooms of slow growing dinoflagellate such as Lingulodinium polyedrum. We measured: near surface stratification with a free-rising CTD profiler, trajectories of drifter buoys with attached thermographs, wind speed and direction, velocity profiles via an Acoustic Doppler Current Profiler, Chlorophyll and cell concentration from water samples and vertical migration using sediment traps. The ADCP and drifter data agree and show noticeable current shear within the first meters of the surface where temperature stratification and high cell densities of L. polyedrum were found during the day. Drifters with 1m depth drogue moved towards the shore, whereas drifters at 3 and 5 m depth showed trajectories parallel or away from shore. A small part of the surface population migrated down to the sea floor during night thus reducing horizontal dispersion. The persistent transport of the surface bloom population towards shore should help maintain the bloom in favorable environmental conditions with high nutrients, but also increasing the potential socioeconomic impact of the blooms. The coast wise transport is not limited to blooms but includes all dissolved and particulate constituents in surface waters. © 2013 Ruiz-de la Torre et al.

chlorophyll, algal bloom, article, cell count, cell density, coastal waters, controlled study, dinoflagellate, Lingulodinium polyedrum, meteorological phenomena, Mexico, near surface temperature stratification, nonhuman, nutrient concentration, popul CIENCIAS FÍSICO MATEMÁTICAS Y CIENCIAS DE LA TIERRA CIENCIAS DE LA TIERRA Y DEL ESPACIO OCEANOGRAFÍA OCEANOGRAFÍA

Modelado y acoplamiento de la conductividad eléctrica e hidráulica a partir de tomografía de rocas

Modeling and coupling of electrical and hydraulic conductivity from rock tomography

Miguel Ángel Martínez Rodríguez (2022, [Tesis de maestría])

En este trabajo se emplearon técnicas de modelado numérico para simular el flujo de corriente eléctrica y de fluido a través de medios porosos con el fin de determinar el factor de resistividad y la permeabilidad, así como la distribución de los campos de densidad de corriente eléctrica y velocidad de flujo. Para el modelado de flujo eléctrico se desarrolló un algoritmo basado en diferencias finitas, mientras que para el modelado hidráulico se empleó una librería reportada en la literatura, basada en el método de redes de Boltzmann. En ambos esquemas de modelado se establecieron condiciones en la frontera poro-grano para modelar los procesos físicos exclusivamente en el espacio poroso. Los valores estimados de factor de resistividad y de permeabilidad, así como la porosidad, se emplearon para estudiar las correlaciones entre estas propiedades a través de relaciones petrofísicas. Para esto, se propuso una expresión que relaciona la permeabilidad y la porosidad y, empleando una relación existente entre el factor de resistividad y la porosidad, se propuso también una relación directa entre la permeabilidad y el factor de resistividad. Las relaciones propuestas fueron aplicadas a los valores numéricos obtenidos para paquetes de esferas generados numéricamente y se encontró que se ajustan mejor a los datos en comparación con las relaciones más comúnmente utilizadas, especialmente para porosidades altas. Se mostró también que estas relaciones petrofísicas toman la forma de las relaciones más comunes conocidas cuando se trata con porosidades bajas. Valores obtenidos de imágenes digitales de un paquete de esferas sintético y una muestra de dolomita mostraron que las expresiones para porosidades bajas son suficientes para ajustar datos de medios porosos con porosidades menores a un valor entre 0.3 y 0.4. Finalmente, se analizaron el factor de resistividad, la permeabilidad, las relaciones petrofísicas, y las distribuciones espaciales y estadísticas de los campos vectoriales de flujo se analizaron para comparar los fenómenos de transporte eléctrico e hidráulico, encontrando que algunos factores, como la porosidad efectiva, son importantes en ambos fenómenos de flujo; mientras que otros, como la adherencia del fluido a las paredes del poro, son particularmente relevantes para el flujo hidráulico.

In this work, numerical modeling techniques were used to simulate the flow of electric current and fluid through porous media in order to determine the resistivity factor and permeability, as well as the distribution of electric current density and flow velocity fields. For electric flow modeling, an algorithm based on finite differences was developed, while for hydraulic modeling, a library reported in the literature, based on lattice Boltzmann method, was used. In both modeling schemes, pore-grain boundary conditions were established to model the physical processes exclusively in the pore space. The estimated values of resistivity factor and permeability, as well as porosity, were used to study the correlations between these properties through petrophysical relationships. An expression relating permeability and porosity was proposed and, using an existing relationship between the resistivity factor and the porosity, a direct relation between permeability and resistivity factor was also proposed. The proposed relations were applied to data obtained for numerically generated sphere packs and were found to fit the data better than the most commonly used relationships, especially for high porosities. It was also shown that these petrophysical relationships take the form of the most common relationships known when dealing with low porosities. Modeling data on digital images of a synthetic sphere pack and a dolomite sample showed that the expressions for low porosities are sufficient to fit data from porous media with porosities lower than 0.3 to 0.4. Finally, resistivity factors, permeabilities, petrophysical relationships, and spatial and statistical distributions of flow vector fields were analyzed to compare electrical and hydraulic transport phenomena, finding that some factors, such as the effective porosity, are important in both flow phenomena; whereas some other, such as the pore-wall adherence, are particularly relevant to hidraulic flux.

Física de rocas, modelado numérico, relaciones petrofísicas, fenómenos de transporte, factor de resistividad, permeabilidad, porosidad, tomografía de rocas, campos vectoriales, distribución estadística Rock physics, numerical modelling, petrophysical relations, transport phenomena, resistivity factor, permeability, porosity, rock tomography, vector fields, statistical distribution CIENCIAS FÍSICO MATEMÁTICAS Y CIENCIAS DE LA TIERRA CIENCIAS DE LA TIERRA Y DEL ESPACIO GEOFÍSICA GEOFÍSICA DE LA MASA SÓLIDA TERRESTRE GEOFÍSICA DE LA MASA SÓLIDA TERRESTRE