Búsqueda avanzada


Área de conocimiento




154 resultados, página 1 de 10

Sistema de visión para detección de fallas de calidad en la identificación de etiquetas en una línea de producción del giro automotriz

Vision system for the detection of quality failures in the identification of labels in an automotive production line

José Rodrigo Hernández Laguna Jorge Adan Romero Guerrero CAROLINA RETA CASTRO (2023, [Artículo])

Este artículo presenta la implementación de un sistema de visión para la detección de fallas en la identificación de etiquetas en una línea de producción de motores eléctricos de confort para vehículos. Anteriormente, la línea de producción dependía completamente de la inspección visual realizada por un operador. La solución propuesta considera tanto los aspectos técnicos del sistema de visión como otros factores clave para asegurar la calidad del proceso, como: las políticas de aseguramiento de calidad de las normas automotrices vigentes en México (IATF 6949:2016 e ISO9000), la mejora continua, la estadística, la ergonomía y la estandarización de procesos. Los resultados demuestran el éxito de la implementación. El sistema demostró ser efectivo al identificar las fallas de manera precisa; se logró una reducción significativa en el número prioritario de riesgo en el análisis y modo de efectos de falla; y se logró una reducción en la estadística de fallas internas y con el cliente, de 2021 a 2022.

Sistema de visión Análisis y modo de efectos de falla Inspección de defectos Industria automotriz Vision system Analysis and failure effects mode Defect inspection Automotive industry INGENIERÍA Y TECNOLOGÍA CIENCIAS TECNOLÓGICAS OTRAS ESPECIALIDADES TECNOLÓGICAS OTRAS OTRAS

Corrección de defectos óseos en el área de Ingeniería tisular

Correction of bone defects by tissue Engineering

ROSA ALICIA SAUCEDO ACUÑA MONICA GALICIA GARCIA JUDITH VIRGINIA RIOS ARANA SIMON YOBANNY REYES LOPEZ (2012, [Artículo])

Hoy en día, los defectos óseos representan uno de los casos de mayor impacto en la salud debido a la frecuencia con que éstos ocurren a causa de traumatismos, fracturas, enfermedades congénitas o degenerativas. En la actualidad, los implantes de tejido óseo de gran volumen se encuentran severamente restringidos a causa de las limitaciones de difusión en la interacción con el ambiente del huésped para los nutrientes, intercambio gaseoso y eliminación de desechos. Es por ello que la corrección de los defectos óseos ha cobrado gran importancia en el área de Ingeniería tisular buscando mejorar las estrategias clínicas para su tratamiento. El propósito de esta revisión es proporcionar un panorama general del desarrollo de andamios para la regeneración de tejido óseo, mostrando los avances logrados en los ensayos in vitro e in vivo en la última década

Currently, bone defects cases represent a major impact on health due to how often they occur because of trauma, fractures, congenital or degenerative diseases. Now, bone implants to large volume are severely restricted because of the diffusion limitations in the interaction

with the environment of the host for nutrients, gas exchange and waste disposal. That is why the correction of bone defects has become very important in the field of tissue engineering looking to improve clinical strategies for treatment. The purpose of this review is to provide an overview of the development of scaffolds for bone tissue regeneration, showing the progress made in the in vitro and in vivo in recent decades.

MEDICINA Y CIENCIAS DE LA SALUD Ingeniería tisular regeneración ósea Andamio Tissue engineering Bone regeneration Scaffolds

Análisis preventivos de variables para la industria cerámica con base en la metodología de análisis a modo y efecto de falla (FMEA method)

Preventive analysis of variables for the ceramic industry based on the failure mode and effect analysis (FMEA method)

Rigel Hugo Carreón Reyes Juan Carlos Neri Guzmán (2023, [Artículo])

El presente estudio indica de una forma tangible la aplicación de la herramienta FMEA (Failure Mode And Effects Analysis -por sus siglas en inglés) en la aplicación de fabricación de cerámica sanitaria, en donde se evalúan las variables que están relacionadas con el proceso de diseño, procesamiento de piezas cerámicas y de su relación existente para poder alcanzar los requisitos normativos y que estos a su vez sean alcanzables. Dentro del estudio se presenta el análisis y elaboración de la matriz riesgos en modo de fallas, así como una serie de definiciones estadísticas con las cuales son evaluados los procesos de fabricación, así como la explicación clara de la metodología FMEA en donde se indica la adecuación de estos conceptos a este tipo de manufacturas (cerámica sanitaria). Este trabajo también describe a través del estudio de caso de las variables una metodología que detalla los conceptos básicos tales como severidad, detección y ocurrencia combinando el desarrollo de tablas parametrizadas y / o acopladas al tipo de proceso de manufactura cerámica .En los resultados que se obtienen se observa la disminución de la incertidumbre hasta de 85% en los valores de RPN y una mejora en el cpk >1,33 como índice de calidad los riesgos o incertidumbres disminuidos son de forma numérica a través de la comprobación de nuevas acciones y el reanálisis de los conceptos de ocurrencia y detección derivados de la implementación de acciones. Las conclusiones indican como una herramienta adecuada el uso de FMEA para el campo de aplicación de la manufactura de cerámica sanitaria.

The present study indicates in a tangible way the application of the FMEA tool (Failure Mode and Effects Analysis) in the application of sanitary ceramic manufacturing, where the variables that are related to the process of design, processing of ceramic pieces and their existing relationship are evaluated in order to achieve the regulatory requirements and that these in turn are achievable. The study presents the analysis and elaboration of the risk matrix in failure mode as well as a series of statistical definitions with which the manufacturing processes are evaluated as well as the clear explanation of the FMEA methodology (failure mode and effects analysis) where the application and adequacy of these concepts to this type of manufactures (sanitary ceramics) is indicated. This paper also describes through the case study of the variables a methodology that details the basic concepts such as severity, detection and occurrence combining the development of parameterized tables and / or coupled to the type of ceramic manufacturing process. In the results obtained, the decrease in uncertainty of until 85% in the values of RPN and an improvement in the cpk >1.33 as a quality index, the risks or uncertainties decreased are numerically through the verification of new actions and the reanalysis of the concepts of occurrence and detection derived from the implementation of actions. The conclusions indicate as an appropriate tool the use of FMEA for the field of application of the manufacture of sanitary ceramics.

AMEF (Análisis de Modo de Efecto y Falla) Productos cerámicos Cerámica sanitaria Procesos cerámicos Severidad Detección Ocurrencia FMEA (Failure Mode and Effects Analysis) Ceramic products Standard ASME Sanitary ceramic Ceramic processess INGENIERÍA Y TECNOLOGÍA CIENCIAS TECNOLÓGICAS OTRAS ESPECIALIDADES TECNOLÓGICAS OTRAS OTRAS

Un Fantasma recorre el mundo: El fantasma de las privatizaciones. Balance del cambio y continuidad en las asociaciones publico-privadas bajo el gobierno de izquierda de México(2018-2021)

MARIELA DIAZ SANDOVAL ALBERTO ESPEJEL ESPINOZA (2021, [Capítulo de libro])

The purpose of this article is to analyze the politics around privatizations in the left-wing government of Andrés Manuel López Obrador (Amlo). The aim is to identify the ideational mark and the possible breaks or continuities of the infrastructure policy in a global context characterized by the promotion of the Public-Private Parnerships (ppps) -as a modality of the privatization of public goods and services-. It is argued that the ideas around the State in the current administration do not approve the participation of the private sector in the prison, and hospital sectors, freezing, to some extent, the privatization inertia promoted since the 1980s. We concluded that despite its open opposition, the Amlo government has had to use ppps in sectors such as road, energy infraestructure, and transport, due to budget restrictions that will be aggravated by the Covid-19 pandemic.

Andrés Manuel López Obrador (Amlo) public-private parnerships ideas partisian potilitics privatizations CIENCIAS SOCIALES CIENCIA POLÍTICA ADMINISTRACIÓN PÚBLICA OTRAS

El papel del juego en la domesticación de plantas

JAIME MARTINEZ CASTILLO EDUARDO PERALTA IDROVO FRANCISCO PERALTA IDROVO HERNAN PERALTA IDROVO ANDREA LEON CADENA (2022, [Artículo])

Cuando pensamos en la domesticación de plantas, es común que se nos venga a la mente especies que satisfacen las necesidades básicas del humano, como aquellas de uso alimenticio, medicinal y vestido; sin embargo, ¿Existen especies en donde el juego una actividad banal para muchas personasha sido parte de su domesticación? En este artículo revisamos este tema tan interesante usando información sobre las especies domesticadas de frijol (Phaseolus spp.) presentes en Sur América.

FRIJOL LUDICA PALLAR POROTO REGION ANDINA SUR AMERICA TORTA BIOLOGÍA Y QUÍMICA CIENCIAS DE LA VIDA BIOLOGÍA VEGETAL (BOTÁNICA) ECOLOGÍA VEGETAL ECOLOGÍA VEGETAL

La expresión del inconsciente arquetípico a través del cuerpo bailado y esculpido en el teatro mitológico afrocubano de Eugenio Hernández Espinosa

Rosana Herrero-Martin (2023, [Capítulo de libro])

En este artículo se analizarán desde una perspectiva jungiana y holística una selección de momentos dancísticos y escultóricos en tres obras dramáticas del corpus teatral mitológico del autor cubano Eugenio Hernández Espinosa (María Antonia, 1967; Odebí, el cazador, 1980, y El Elegido, 1995), protagonizadas en los tres casos por diferentes orishas, nombre con el que se conocen popularmente en Cuba —concretamente en la tradición cultural y espiritual yoruba de la isla— a las manifestaciones antropomórficas, físicas, vivenciales y sobrenaturales de la divinidad. El paradigma de análisis aplicado es principalmente el del pensamiento integral de Ken Wilber, por el cual cuerpo-mente-psique-divinidad se conciben como un todo interconectado, integrado y resonador dentro del proceso de individualización de la persona, siendo el cuerpo el vehículo, el espejo, la palanca y la puerta de acceso, es decir, siendo el cuerpo el que refleja, activa y abre el resto de las dimensiones.

In this article, a selection of dance and sculptural moments in three dramatic works from the mythological theatrical corpus of Cuban author Eugenio Hernández Espinosa will be analyzed from a Jungian and holistic perspective (María Antonia, 1967; Odebí, the Hunter, 1980, and The Chosen, 1995). All three plays star a selection of Orishas, the name by which the anthropomorphic, physical, experiential and supernatural manifestations of divinity are popularly known in Cuba — specifically in the island’s Yoruba cultural and spiritual tradition. The analytical paradigm to be applied is mainly Ken Wilber’s integral thought, by which body-mind-psyche-divinity are conceived as an interconnected, integrated and resonating whole within the person’s individualization process, the body being the vehicle, the mirror, the lever and the access door, that is, the body being the one which reflects, activates and opens the rest of the dimensions.

Eugenio Hernández Espinosa, arquetipos, orishas, teatro mitológico. Archetypes, orisha, mythological theatre. Archetype (Psychology) in art. Dance--Psychological aspects. Body and mind. Orishas in art. Arquetipo (Psicología) en el arte. Danza. Mente y cuerpo. Orishas. Autores cubanos. PQ7390.H397 HUMANIDADES Y CIENCIAS DE LA CONDUCTA CIENCIAS DE LAS ARTES Y LAS LETRAS TEORÍA, ANÁLISIS Y CRÍTICA DE LAS BELLAS ARTES TEATRO

Impact of automation on enhancing energy quality in grid-connected photovoltaic systems

Virgilio Alfonso Murillo Rodríguez NOE VILLA VILLASEÑOR José Manuel Robles Solís OA Guirette-Barbosa (2023, [Artículo])

Rapid growth in the integration of new consumers into the electricity sector, particularly in the industrial sector, has necessitated better control of the electricity supply and of the users’ op-erating conditions to guarantee an adequate quality of service as well as the unregulated dis-turbances that have been generated in the electrical network that can cause significant failures, breakdowns and interruptions, causing considerable expenses and economic losses. This research examines the characteristics of electrical variations in equipment within a company in the industrial sector, analyzes the impact generated within the electrical system according to the need for operation in manufacturing systems, and proposes a new solution through automation of the regulation elements to maintain an optimal system quality and prevent damage and equipment failures while offering a cost-effective model. The proposed solution is evaluated through a reliable simulation in ETAP (Energy Systems Modeling, Analysis and Optimization) software, which emulates the interaction of control elements and simulates the design of electric flow equipment operation. The results demonstrate an improvement in system performance in the presence of disturbances when two automation schemes are applied as well as the exclusive operation of the capacitor bank, which improves the total system current fluctuations and improves the power factor from 85.83% to 93.42%. Such a scheme also improves the waveform in the main power system; another improvement result is when simultaneously operating the voltage and current filter together with the PV system, further improving the current fluctuations, improving the power factor from 85.83% to 94.81%, achieving better stability and improving the quality of the waveform in the main power grid.

This article belongs to Special Issue Advances and Optimization of Electric Energy System.

Power quality Capacitor bank Voltage and current filter Photovoltaic system INGENIERÍA Y TECNOLOGÍA CIENCIAS TECNOLÓGICAS OTRAS ESPECIALIDADES TECNOLÓGICAS OTRAS OTRAS

Diseño de elementos lúdicos para apoyar el reconocimiento de emociones en el proceso terapéutico cognitivo-conductual de niñas y niños de 6 a 8 años que padecen trastornos de ansiedad en la CDMX y área metropolitana

Alma Karla Buyoli Saavedra (2024, [Tesis de maestría])

179 páginas. Maestría en Diseño y Desarrollo de Productos

En la actualidad, la ansiedad representa uno de los mayores y más silenciosos problemas de la sociedad. Del mismo modo, las infancias y las adolescencias son una población que se ve afectada en gran medida por estos trastornos. En definitiva, estas es una población con una problemática apremiante de considerar, observar y trabajar. Por tal razón, resulta fundamental generar herramientas y estrategias que permitan a niños, niñas y adolescentes identificar y regular sus emociones de manera efectiva. Aprender a identificar las emociones es algo de suma importancia no solo dentro del proceso terapéutico, sino en la vida diaria del infante. En primer lugar, el hecho de reconocer y expresar emociones contribuye a canalizar la ansiedad. De igual forma, esto les ayuda a aprender a enfrentar los problemas de la vida diaria de una manera adecuada; por lo tanto, lo anterior se estima como un beneficio no solo en la infancia, sino también en la edad adulta. Asimismo, un correcto manejo emocional les permite incrementar la percepción de control sobre los sucesos que viven. Igualmente, esto refuerza su habilidad para empatizar, resolver conflictos y llegar a acuerdos, lo que mejora su forma de relacionarse con otras personas. En suma, son diferentes beneficios que se otorgarían al infante al aprender a conocer, identificar y expresar sus emociones. No obstante, estas aportaciones pueden ser mayores si se realizan a través de elementos lúdicos. Para empezar, la recreación es una acción nata y cotidiana en los infantes. El uso de fantasía, el juego simbólico y la imaginación son actividades naturales del desarrollo en el juego de los infantes (Schaefer, 2012). De igual manera, cuando las y los menores juegan, aprenden a tolerar la frustración, a regular sus emociones y a destacar en una tarea que es innata (Schaefer, 2012). En esa medida, el juego es quizá el medio más poderoso y apropiado para el desarrollo en el cual las y los menores pueden construir relaciones con los adultos, desarrollar el pensamiento causal, procesar las experiencias estresantes y aprender habilidades sociales (Chaloner, 2001). Por tal motivo, la propuesta para apoyar el proceso terapéutico se efectúa por medio de elementos lúdicos que permitan a los infantes identificar y expresar emociones a través del juego. Por tal motivo el objetivo de este trabajo es diseñar elementos lúdicos que apoyen a los niños de 6 a 8 años diagnosticados con ansiedad que se encuentren en tratamiento psicológico de la teoría cognitivo-conductual en la CDMX y área metropolitana con el fin de que puedan conocer, identificar y expresar sus emociones.

Games--Design and construction. Child psychotherapy. Play therapy. Games--Therapeutic use. Ansiedad en niños. Terapia de juego. Psicoterapia infantil. GV1230 HUMANIDADES Y CIENCIAS DE LA CONDUCTA CIENCIAS DE LAS ARTES Y LAS LETRAS TEORÍA, ANÁLISIS Y CRÍTICA DE LAS BELLAS ARTES

Do provisioning ecosystem services change along gradients of increasing agricultural production?

Ronju Ahammad Stephanie Tomscha Sarah Gergel Frédéric Baudron Jean-Yves Duriaux Chavarría Samson Foli Dominic Rowland Josh Van Vianen Terence Sunderland (2024, [Artículo])

Context: Increasing agricultural production shapes the flow of ecosystem services (ES), including provisioning services that support the livelihoods and nutrition of people in tropical developing countries. Although our broad understanding of the social-ecological consequences of agricultural intensification is growing, how it impacts provisioning ES is still unknown. Objectives: We examined the household use of provisioning ES across a gradient of increasing agricultural production in seven tropical countries (Bangladesh, Burkina Faso, Cameroon, Ethiopia, Indonesia, Nicaragua and Zambia). We answered two overarching questions: (1) does the use of provisioning ES differ along gradients of agriculture production ranging from zones of subsistence to moderate and to high agriculture production? and (2) are there synergies and/or trade-offs within and among groups of ES within these zones? Methods: Using structured surveys, we asked 1900 households about their assets, livestock, crops, and collection of forest products. These questions allowed us to assess the number of provisioning ES households used, and whether the ES used are functionally substitutable (i.e., used similarly for nutrition, material, and energy). Finally, we explored synergies and trade-offs among household use of provisioning ES. Results: As agricultural production increased, provisioning ES declined both in total number and in different functional groups used. We found more severe decreases in ES for relatively poorer households. Within the functional groups of ES, synergistic relationships were more often found than trade-offs in all zones, including significant synergies among livestock products (dairy, eggs, meat) and fruits. Conclusions: Considering landscape context provides opportunities to enhance synergies among provisioning services for households, supporting resilient food systems and human well-being.

Agricultural Production Zones Agricultural Intensifcation Synergies and Trade-Offs Landscape Multifunctionality Social-Ecological Systems CIENCIAS AGROPECUARIAS Y BIOTECNOLOGÍA AGRICULTURE INTENSIFICATION ECOSYSTEM SERVICES LANDSCAPE SOCIAL-ECOLOGICAL RESILIENCE ECOSYSTEM SERVICES