Advanced search


Knowledge area




156 results, page 5 of 10

Metodología Value Stream Mapping (VSM) aplicada a procesos de perforación de pozos petroleros en México

Value Stream Mapping (VSM) methodology applied to oil well drilling processes in Mexico

NEMIAS VASQUES MORALES CARLOS BELISARIO CASTAÑEDA CASTAÑEDA (2023)

Con los cambios recientes en el sector energético a nivel mundial, la industria petrolera enfrenta retos importantes en la extracción de hidrocarburos, por lo que se ha priorizado la implementación de operaciones que permitan esta actividad de forma eficiente y optimizada. En este trabajo se analizará la aplicación de una de las herramientas del Lean Manufacturing, el VSM (Value Stream Mapping) con la finalidad de identificar posibles mejoras y disminución de tiempos no productivos en los procesos de perforación de pozos petroleros, de acuerdo a las experiencias previas en campos desarrollados en México. Se pretende demostrar que herramientas de análisis de eficiencia para la manufactura pueden adaptarse a industrias pesadas como la petrolera y en particular del área de perforación.

With recent changes in the energy sector worldwide, the oil industry faces significant challenges in the extraction of hydrocarbons, which is why the implementation of operations that allow this activity in an efficient and optimized manner has been prioritized. In this work, the application of one of the Lean Manufacturing tools, VSM (Value Stream Mapping) will be analyzed with the purpose of identifying possible improvements and reduction of non-productive times in the oil well drilling processes, according to experiences. previous ones in developed fields in Mexico. The aim is to demonstrate that efficiency analysis tools for manufacturing can be adapted to heavy industries such as the oil industry and in particular the drilling area.

Article

Lean Operaciones Tiempos no productivos Operations Non-productive times INGENIERÍA Y TECNOLOGÍA CIENCIAS TECNOLÓGICAS OTRAS ESPECIALIDADES TECNOLÓGICAS OTRAS OTRAS

Whole-genome comparison between reference sequences and oyster Vibrio vulnificus C-genotype strains

CARLOS ABRAHAM GUERRERO RUIZ (2019)

Whole-genome sequences of Vibrio vulnificus clinical genotype (C-genotype) from the CICESE Culture Collection, isolated from oysters, were compared with reference sequences of CMCP6 and YJ016 V. vulnificus C-genotype strains of clinical origin. The RAST web server estimated the whole genome to be ~4.8 Mb in CICESE strain 316 and ~4.7 Mb in CICESE strain 325. No plasmids were detected in the CICESE strains. Based on a phylogenetic tree that was constructed with the whole-genome results, we observed high similarity between the reference sequences and oyster C-genotype isolates and a sharp contrast with environmental genotype (E-genotype) reference sequences, indicating that the differences between the C- and E-genotypes do not necessarily correspond to their isolation origin. The CICESE strains share 3488 genes (63.2%) with the YJ016 strain and 3500 genes (63.9%) with the CMCP6 strain. A total of 237 pathogenicity associated genes were selected from reference clinical strains, where—92 genes were from CMCP6, 126 genes from YJ016, and 19 from MO6-24/ O; the presence or absence of these genes was recorded for the CICESE strains. Of the 92 genes that were selected for CMCP6, 67 were present in both CICESE strains, as were as 86 of the 126 YJ016 genes and 13 of the 19 MO6-24/O genes. The detection of elements that are related to virulence in CICESE strains—such as the RTX gene cluster, vvhA and vvpE, the type IV pili cluster, the XII genomic island, and the viuB genes, suggests that environmental isolates with the C-genotype, have significant potential for infection. © 2019 Guerrero et al. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.

Article

Article, bacterial gene, bacterial strain, bacterial virulence, comparative study, controlled study, gene cluster, gene identification, genomic island, genotype, nonhuman, phylogenetic tree, sequence analysis, strain identification, Vibrio vulnificus BIOLOGÍA Y QUÍMICA CIENCIAS DE LA VIDA GENÉTICA GENÉTICA

Thermal and mechanical properties of PLA-based multiscale cellulosic biocomposites

MIGUEL ANGEL RUZ CRUZ Pedro Jesús Herrera Franco Emmanuel Alejandro Flores Johnson MARIA VERONICA MORENO CHULIM LUCIANO MIGUEL GALERA MANZANO Alex Valadez González (2022)

In this work polylactic acid (PLA) based multiscale cellulosic biocomposites were prepared with the aim to evaluate the effect of the incorporation of cellulose nanocrystals (CNCs) on the PLA biocomposites reinforced with cellulose microfibers (MFCs). For this, PLA composite materials reinforced with both MFCs and with a combination of MFCs and CNCs were prepared, while keeping the content of cellulosic reinforcements constant. The thermal and mechanical properties of these multiscale PLA biocomposites were characterized by thermogravimetry (TGA), differential scanning calorimetry (DSC), flexural mechanical and, dynamic mechanical (DMA) tests. Likewise, they were characterized by Fourier transform infrared spectroscopy (FTIR) and scanning electron microscopy (SEM). The results show that the replacement of MFCs by CNCs in the 1–5% range appreciably modifies the thermal and mechanical properties of multiscale compounds. For example, they increase the thermal stability of the materials, modify the PLA crystallization process and play the role of adhesion promoters since the mechanical properties in flexure increase in the order of 40% and the storage modulus increases in the order of 35% at room temperature. Also, the addition of CNCs increases the relaxation temperature of the material from 50 to 60 °C, thereby expanding the temperature range for its use. © 2022 The Author(s)

Article

MULTISCALE BIOCOMPOSITES CELLULOSE MICROFIBER CELLULOSE NANOCRYSTALS HIERARCHICAL STRUCTURE PROPERTIES INGENIERÍA Y TECNOLOGÍA CIENCIAS TECNOLÓGICAS TECNOLOGÍA DE MATERIALES PROPIEDADES DE LOS MATERIALES PROPIEDADES DE LOS MATERIALES

Synthesis of Ferroelectric and Multiferroics Thin films of BiMnO3/ SrTiO3 and Structural, Piezoelectric, Magnetic, Optical, and Mechanical Properties Characterization

Glory Valentine Umoh (2022)

Multiferroic characteristics of BiMnO3 thin films offer great prospects to explore, either

in terms of ferroelectricity, ferromagnetism, or ferroelasticity. Ferroelectric and

ferromagnetic materials can be used in data storage due to their electrical and magnetic

properties. Ferroelastic can find its application in microelectromechanical systems

devices. This dissertation focused on the synthesis, characterization, and improvement of

the multiferroic properties of polycrystalline BiMnO3 thin films as well as the elaboration

influence of Cu on the magnetism of BiMnO3 thin films. BiMnO3 films were grown on

three different substrates, Si (001), Pt-buffered Si (001), Nb-doped SrTiO3 (100), and also

doped with different amounts of Cu. The films were characterized using techniques such

as X-Ray diffraction (XRD), scanning electron microscope (SEM), HRTEM

observations, by energy-dispersive X-ray spectroscopy (EDS), atomic force microscopy

(AFM), X-ray photoelectron spectroscopy (XPS), Raman spectroscopy, Visible-near-IR

spectroscopy (Vis-NIR), electron energy loss spectrometer (EELS), nanoindenter,

superconductor quantum interference device (SQUID) magnetometer, and finally, the

polarization-electric field (P-E) hysteresis loops of the BiMnO3 thin films were conducted

at 200 and 300 K. There are several studies on the growth of thin films, however, they are

not clear and in some cases contradictory, therefore, different parameters were controlled

during the deposition in terms of working pressure, RF power, substrate, deposition

10

temperature, and target to substrate distance. After deposition ex-situ thermal treatment

was carried out in order to compensate for the volatility of bismuth and also to eliminate

secondary phase.

Kramer’s–Krӧnig analysis was used to determine bandgap, via a polynomial fit in the

energy loss function (ELF) plot with an Eg = 1.63 eV, complex dielectric function, and

static dielectric constant, ε* = 4.68 of the grown BiMnO3 thin films. The reflection

coefficient Ґl of the BiMnO3 thin films was used to elucidate the reflection loss in the

BiMnO3 thin films. XPS analysis revealed the existence of Mn charge transition of 3+

and 4+ states. Resistivity result describes BIMnO3 as a semiconductor. The

nanomechanical characterization demonstrated that the region of penetration depth was

below 10% of BiMnO3 film thickness. Young's modulus (E), hardness (H), and Stiffness

(S) were measured to be 142 ± 3 GPa, 8 ± 0.2 GPa, and 44072 ± 45 N/m respec

Doctoral thesis

SÍNTESIS DE MATERIALES Materiales Multiferroicos CIENCIAS FÍSICO MATEMÁTICAS Y CIENCIAS DE LA TIERRA FÍSICA OTRAS ESPECIALIDADES FÍSICAS OTRAS OTRAS

Do provisioning ecosystem services change along gradients of increasing agricultural production?

Ronju Ahammad Stephanie Tomscha Sarah Gergel Frédéric Baudron Jean-Yves Duriaux Chavarría Samson Foli Dominic Rowland Josh Van Vianen Terence Sunderland (2024)

Context: Increasing agricultural production shapes the flow of ecosystem services (ES), including provisioning services that support the livelihoods and nutrition of people in tropical developing countries. Although our broad understanding of the social-ecological consequences of agricultural intensification is growing, how it impacts provisioning ES is still unknown. Objectives: We examined the household use of provisioning ES across a gradient of increasing agricultural production in seven tropical countries (Bangladesh, Burkina Faso, Cameroon, Ethiopia, Indonesia, Nicaragua and Zambia). We answered two overarching questions: (1) does the use of provisioning ES differ along gradients of agriculture production ranging from zones of subsistence to moderate and to high agriculture production? and (2) are there synergies and/or trade-offs within and among groups of ES within these zones? Methods: Using structured surveys, we asked 1900 households about their assets, livestock, crops, and collection of forest products. These questions allowed us to assess the number of provisioning ES households used, and whether the ES used are functionally substitutable (i.e., used similarly for nutrition, material, and energy). Finally, we explored synergies and trade-offs among household use of provisioning ES. Results: As agricultural production increased, provisioning ES declined both in total number and in different functional groups used. We found more severe decreases in ES for relatively poorer households. Within the functional groups of ES, synergistic relationships were more often found than trade-offs in all zones, including significant synergies among livestock products (dairy, eggs, meat) and fruits. Conclusions: Considering landscape context provides opportunities to enhance synergies among provisioning services for households, supporting resilient food systems and human well-being.

Article

Agricultural Production Zones Agricultural Intensifcation Synergies and Trade-Offs Landscape Multifunctionality Social-Ecological Systems CIENCIAS AGROPECUARIAS Y BIOTECNOLOGÍA AGRICULTURE INTENSIFICATION ECOSYSTEM SERVICES LANDSCAPE SOCIAL-ECOLOGICAL RESILIENCE ECOSYSTEM SERVICES

Relación de adenovirus 36 con la obesidad, expresión de genes (c/ebpB y hif-1A) y la morfologia del tejido adiposo.

JORGE BARRERA ALCOCER (2021)

Introducción: Al origen infeccioso de la obesidad se le conoce como ¿infectobesidad¿. Los primeros estudios realizados en modelos animales, como pollos, ratones y primates no humanos, asociaron la presencia de anticuerpos contra HAd36 con el desarrollo de la obesidad y la ganancia de peso, de igual manera los ensayos realizados en preadipocitos (3T3-L1) y células madre adiposas humanas (hASCc) han demostrado que HAd36 se asocia con la expresión de genes implicados en la diferenciación celular y el metabolismo de lípidos. Los estudios realizados para identificar el DNA viral en tejido adiposo son pocos y los resultados inconsistentes. Objetivo: Analizar la presencia del DNA de HAd36 en biopsias de tejido adiposo subcutáneo y su relación con la obesidad, cambios morfológicos de los adipocitos y la expresión de genes adipogénicos y de metabolismo celular. Materiales y Métodos: Se recolectaron un total de 52 biopsias de tejido adiposo subcutáneo de mujeres sometidas a liposucción y/o lipectomia. Se realizó una evaluación antropométrica y clínico-bioquímica. La identificación del DNA de HAd36 se realizó por PCR convencional, la expresión de los genes C/EBPB, HIF-1A y ¿-actina se determinó utilizando sondas TaqMan. La morfología celular se analizó en secciones de tejido adiposo teñidas con H&E, la estimación del número y tamaño de las células se realizó con el software Image J Fiji. Resultados: Se identificó el DNA de HAd36 en 16 muestras de tejido adiposo subcutáneo (31%). La presencia del DNA viral no se asoció con los parámetros antropométricos o metabólicos, tampoco con cambios en la morfología del tejido adiposo. Los niveles de expresión de mRNA para C/EBPB y HIF-1A no mostraron diferencias significativas entre las muestras positivas y negativas al DNA viral (p>0.05). Conclusión: El DNA de HAd36 puede estar presente en el tejido adiposo subcutáneo, pero la presencia del DNA viral no se encontró relacionado con los cambios morfológicos en este tejido, ni con la expresión de genes como C/EBPB y HIF-1A.

Doctoral thesis

BIOLOGÍA Y QUÍMICA CIENCIAS DE LA VIDA GENÉTICA GENÉTICA CLÍNICA