Structural analysis evaluationfor rollers of chassis dynoUsing finite element software

Jesús Emmanuel López Rizo ALFREDO CHAVEZ LUNA JAIME GONZALO SANTANA ESQUIVEL (2023, [Artículo])

This paper discusses the design considerations for a chassis dynamometer, focused on the rollers system used for measuring the power and torque of a vehicle in a university-level workshop. The design must prioritize factors such as safety, ease of use, adaptability to diverse types of vehicles, and the inclusion of safety systems to protect students and the vehicle. The work suggests adaptative features for the design, such as an adjustable fastening system and a compact and portable design, to adapt the structure into a university laboratory. The study also describes common methods for measuring engine power and torque using a chassis dynamometer, and the accurate and reliable measurement systems used for this purpose. This concludes with a discussion of the manufacturing methods used for the chassis dynamometer and a static analysis of the maximum effort capacity in each roller using Von Mises and Goodman fatigue theories. Developing a chassis dynamometer, in accordance the current patents available for workshop practices in a university is essential for providing students with comprehensive training.

Chassis dynamometer Conceptual design Finite element software Power and torque measurement Structural analysis INGENIERÍA Y TECNOLOGÍA CIENCIAS TECNOLÓGICAS OTRAS ESPECIALIDADES TECNOLÓGICAS OTRAS OTRAS

Diseño y activismo artístico

Olivia Fragoso-Susunaga (2023, [Capítulo de libro])

En el 2015, las Naciones Unidas proponen una serie de objetivos dirigidos a convocar a los habitantes del mundo a realizar acciones orientadas a acabar con la pobreza, mejorar las condiciones del planeta y lograr que, para el 2030, todas las personas puedan gozar de paz y bienestar. A estos objetivos se les conoce como los Objetivos de Desarrollo Sostenible (ODS). La educación superior juega un papel fundamental en el logro de los ODS. La UAM y, en el caso que nos compete, el CyAD están llamados a colaborar en esta tarea que nos involucra a todos y todas quienes formamos la comunidad universitaria. Este trabajo es una reflexión sobre la importancia que tiene la formación en activismo artístico en la educación del diseño para el logro de los ODS. Se propone que enfatizar el vínculo entre el diseño y el activismo artístico es parte de un escenario futuro indiscutiblemente necesario en el currículo de licenciatura en el CyAD.

In 2015, the United Nations proposed a series of goals aimed at calling on the world’s inhabitants to take action to end poverty, improve the conditions of the planet and ensure that by 2030 all people can enjoy peace and well-being. These goals are known as the Sustainable Development Goals (SDGs). Higher education plays a fundamental role in the achievement of the SDGs, the UAM and, in the case that concerns us, the CyAD are called to collaborate in this task that involves all of us who form the university community. This work is a reflection on the importance of training in artistic activism in design education for the achievement of the SDGs. It is proposed that emphasizing the link between design and art activism is part of an indisputably necessary future scenario in the undergraduate curriculum at CyAD.

Activismo artístico, educación del diseño, cultura. Artistic activism, design education, culture. Sustainable Development Goals. Art and social action. Education, Higher--Social aspects. Educational change. Artists--Political activity. Universidad Autónoma Metropolitana. Unidad Azcapotzalco. División de Ciencias y Artes para el Diseño. Desarrollo sustentable. Participación social. Cambio educativo. NX180.P64 HUMANIDADES Y CIENCIAS DE LA CONDUCTA CIENCIAS DE LAS ARTES Y LAS LETRAS

Associations between endogenous spike cytokinins and grain-number traits in spring wheat genotypes

Gemma Molero Carolina Rivera-Amado Matthew Paul Reynolds John Foulkes (2024, [Artículo])

Spike Cytokinins Grain Number Fruiting Efficiency Wheat Breeding CIENCIAS AGROPECUARIAS Y BIOTECNOLOGÍA SPIKES CYTOKININS GRAIN FRUITING HARVEST INDEX WHEAT PLANT BREEDING

Development of a thermoelectric test for electrical contactors

PABLO OROZCO CORRAL FRANCISCO JAVIER IBARRA VILLEGAS NOE VILLA VILLASEÑOR (2023, [Artículo])

In the economic model in which we develop, there is a dependence on the means of transport that every day is increasing and due to the importance of electrification in the issue of efficient and clean transportation, has caused the need for companies supplying components for automotive manufacturers to evolve and develop new technologies to stay ahead of the needs of their customers being in full evolution towards electrified transport. This evolution extends not only to manufacturing but to the test methods that currently exist, since automotive standards require suppliers to test in laboratory, the components they sell to their customers to ensure their correct operation.

Electrical contactors Powered thermal cycle endurance Busbars Electrification industry INGENIERÍA Y TECNOLOGÍA CIENCIAS TECNOLÓGICAS OTRAS ESPECIALIDADES TECNOLÓGICAS OTRAS OTRAS

Solar Irrigation Pump (SIP) sizing tool: user manual (Beta version)

Santosh Mali Paresh Shirsath (2022, [Libro])

CIENCIAS AGROPECUARIAS Y BIOTECNOLOGÍA SOLAR POWERED IRRIGATION SYSTEMS PUMPS IRRIGATION WATER MANUALS

Editorial: Genome wide association studies and genomic selection for crop improvement in the era of Big Data

Alison Bentley Charles Chen Nunzio D'Agostino (2022, [Artículo])

Allele Mining High-Throughput Phenotyping Genomic Estimated Breeding Value CIENCIAS AGROPECUARIAS Y BIOTECNOLOGÍA CROP IMPROVEMENT DNA CHROMOSOME MAPPING GENETIC LINKAGE GENOMES GENOTYPING GERMINATION HEAT STRESS QUALITY CONTROL SINGLE NUCLEOTIDE POLYMORPHISM TRITICUM AESTIVUM GENETIC DIVERSITY (AS RESOURCE) HIGH-THROUGHPUT SEQUENCING

Nitrogen use efficiency and genotype-by-environment interaction in durum wheat genotypes under varying nitrogen supply

Tesfaye Geleta Aga Bekele Abeyo (2024, [Artículo])

Straw Nitrogen Uptake Nitrogen Harvest Index CIENCIAS AGROPECUARIAS Y BIOTECNOLOGÍA NITROGEN-USE EFFICIENCY STRAW GENOTYPE ENVIRONMENT INTERACTION HARD WHEAT

Catching-up with genetic progress: Simulation of potential production for modern wheat cultivars in the Netherlands

João Vasco Silva Frits K. Van Evert Pytrik Reidsma (2023, [Artículo])

Context: Wheat crop growth models from all over the world have been calibrated on the Groot and Verberne (1991) data set, collected between 1982 and 1984 in the Netherlands, in at least 28 published studies to date including various recent ones. However, the recent use of this data set for calibration of potential yield is questionable as actual Dutch winter wheat yields increased by 3.1 Mg ha-1 over the period 1984 – 2015. A new comprehensive set of winter wheat experiments, suitable for crop model calibration, was conducted in Wageningen during the growing seasons of 2013–2014 and of 2014–2015. Objective: The present study aimed to quantify the change of winter wheat variety traits between 1984 and 2015 and to examine which of the identified traits explained the increase in wheat yield most. Methods: PCSE-LINTUL3 was calibrated on the Groot and Verberne data (1991) set. Next, it was evaluated on the 2013–2015 data set. The model was further recalibrated on the 2013–2015 data set. Parameter values of both calibrations were compared. Sensitivity analysis was used to assess to what extent climate change, elevated CO2, changes in sowing dates, and changes in cultivar traits could explain yield increases. Results: The estimated reference light use efficiency and the temperature sum from anthesis to maturity were higher in 2013–2015 than in 1982–1984. PCSE-LINTUL3, calibrated on the 1982–1984 data set, underestimated the yield potential of 2013–2015. Sensitivity analyses showed that about half of the simulated winter wheat yield increase between 1984 and 2015 in the Netherlands was explained by elevated CO2 and climate change. The remaining part was explained by the increased temperature sum from anthesis to maturity and, to a smaller extent, by changes in the reference light use efficiency. Changes in sowing dates, biomass partitioning fractions, thermal requirements for anthesis, and biomass reallocation did not explain the yield increase. Conclusion: Recalibration of PCSE-LINTUL3 was necessary to reproduce the high wheat yields currently obtained in the Netherlands. About half of the reported winter wheat yield increase was attributed to climate change and elevated CO2. The remaining part of the increase was attributed to changes in the temperature sum from anthesis to maturity and, to a lesser extent, the reference light use efficiency. Significance: This study systematically addressed to what extent changes in various cultivar traits, climate change, and elevated CO2 can explain the winter wheat yield increase observed in the Netherlands between 1984 and 2015.

Light Use Efficiency Potential Yield CIENCIAS AGROPECUARIAS Y BIOTECNOLOGÍA CROP MODELLING LIGHT PHENOLOGY MAXIMUM SUSTAINABLE YIELD TRITICUM AESTIVUM WINTER WHEAT

The potential of UAV and very high-resolution satellite imagery for yellow and stem rust detection and phenotyping in Ethiopia

Gerald Blasch David Hodson Francelino Rodrigues (2023, [Artículo])

Very high (spatial and temporal) resolution satellite (VHRS) and high-resolution unmanned aerial vehicle (UAV) imagery provides the opportunity to develop new crop disease detection methods at early growth stages with utility for early warning systems. The capability of multispectral UAV, SkySat and Pleiades imagery as a high throughput phenotyping (HTP) and rapid disease detection tool for wheat rusts is assessed. In a randomized trial with and without fungicide control, six bread wheat varieties with differing rust resistance were monitored using UAV and VHRS. In total, 18 spectral features served as predictors for stem and yellow rust disease progression and associated yield loss. Several spectral features demonstrated strong predictive power for the detection of combined wheat rust diseases and the estimation of varieties’ response to disease stress and grain yield. Visible spectral (VIS) bands (Green, Red) were more useful at booting, shifting to VIS–NIR (near-infrared) vegetation indices (e.g., NDVI, RVI) at heading. The top-performing spectral features for disease progression and grain yield were the Red band and UAV-derived RVI and NDVI. Our findings provide valuable insight into the upscaling capability of multispectral sensors for disease detection, demonstrating the possibility of upscaling disease detection from plot to regional scales at early growth stages.

Very High Resolution Imagery Disease Detection Methods Early Growth Stages CIENCIAS AGROPECUARIAS Y BIOTECNOLOGÍA UNMANNED AERIAL VEHICLES STEM RUST PHENOTYPING HIGH-THROUGHPUT PHENOTYPING WHEAT

Genome-wide association analyses of agronomic traits and Striga hermonthica resistance in pearl millet

Hussein Shimelis Chris Ojiewo Abhishek Rathore (2023, [Artículo])

Pearl millet (Pennisetum glaucum [L.] R. Br.) is a nutrient-dense, relatively drought-tolerant cereal crop cultivated in dry regions worldwide. The crop is under-researched, and its grain yield is low (< 0.8 tons ha−1) and stagnant in the major production regions, including Burkina Faso. The low productivity of pearl millet is mainly attributable to a lack of improved varieties, Striga hermonthica [Sh] infestation, downy mildew infection, and recurrent heat and drought stress. Developing high-yielding and Striga-resistant pearl millet varieties that satisfy the farmers’ and market needs requires the identification of yield-promoting genes linked to economic traits to facilitate marker-assisted selection and gene pyramiding. The objective of this study was to undertake genome-wide association analyses of agronomic traits and Sh resistance among 150 pearl millet genotypes to identify genetic markers for marker-assisted breeding and trait introgression. The pearl millet genotypes were phenotyped in Sh hotspot fields and screen house conditions. Twenty-nine million single nucleotide polymorphisms (SNPs) initially generated from 345 pearl millet genotypes were filtered, and 256 K SNPs were selected and used in the present study. Phenotypic data were collected on days to flowering, plant height, number of tillers, panicle length, panicle weight, thousand-grain weight, grain weight, number of emerged Striga and area under the Striga number progress curve (ASNPC). Agronomic and Sh parameters were subjected to combined analysis of variance, while genome-wide association analysis was performed on phenotypic and SNPs data. Significant differences (P < 0.001) were detected among the assessed pearl millet genotypes for Sh parameters and agronomic traits. Further, there were significant genotype by Sh interaction for the number of Sh and ASNPC. Twenty-eight SNPs were significantly associated with a low number of emerged Sh located on chromosomes 1, 2, 3, 4, 6, and 7. Four SNPs were associated with days-to-50%-flowering on chromosomes 3, 5, 6, and 7, while five were associated with panicle length on chromosomes 2, 3, and 4. Seven SNPs were linked to thousand-grain weight on chromosomes 2, 3, and 6. The putative SNP markers associated with a low number of emerged Sh and agronomic traits in the assessed genotypes are valuable genomic resources for accelerated breeding and variety deployment of pearl millet with Sh resistance and farmer- and market-preferred agronomic traits.

High-Yielding Varieties Striga-Resistant Agronomic Parameters CIENCIAS AGROPECUARIAS Y BIOTECNOLOGÍA GENOME-WIDE ASSOCIATION STUDIES STRIGA HERMONTHICA PEARL MILLET