Búsqueda avanzada


Área de conocimiento




794 resultados, página 8 de 10

Analyzing antifragility among smallholder farmers in Bihar, India: An assessment of farmers' vulnerability and the strengths of positive deviants

Roos Adelhart Toorop Santiago Lopez-Ridaura ML JAT Deepak Bijarniya Jeroen Groot (2023, [Artículo])

Farmers around the world are increasingly vulnerable: climate variability is identified as the primary stressor, but unfavorable biophysical circumstances and disturbances in the socioeconomic domain (labor dynamics and price volatility) also affect farm management and production. To deal with these disturbances, adaptations are recognized as essential. Antifragility acknowledges that adaptations and volatility are inherent characteristics of complex systems and abandons the idea of returning to the pre-disturbance system state. Instead, antifragility recognizes that disturbances can trigger reorganization, enabling selection and removal of weaker system features and allowing the system to evolve toward a better state. In this study, we assessed the vulnerability of different types of smallholder farms in Bihar, India, and explored the scope for more antifragile farming systems that can 'bounce back better' after disturbances. Accumulation of stocks, creation of optionality (i.e., having multiple options for innovation) and strengthening of farmer autonomy were identified as criteria for antifragility. We had focus group discussions with in total 92 farmers and found that most expressed themselves to be vulnerable: they experienced challenges but had limited adaptive capacity to change their situation. They mostly made short-term decisions to cope with or mitigate urgent challenges but did not engage in strategic planning driven by longer-term objectives. Instead, they waited for governmental support to improve their livelihoods. Despite being confronted with similar challenges, four positive deviant farmers showed to be more antifragile: their diverse farming systems were abundant in stocks and optionality, and the farmers were distinguished in terms of their autonomy, competence, and connectedness to peers, the community, and markets. To support antifragility among regular farmers, adaptations at policy level may be required, for example, by shifting from a top-down toward a bottom-up adaptation and innovation regime where initiative and cooperation are encouraged. With a more autonomous orientation, farmers' intrinsic motivation is expected to increase, enabling transitions at the farm level. In this way, connected systems can be developed which are socioeconomically and biophysically adaptive. When practices, knowledge, and skills are continuously developed, an antifragile system with ample stocks and optionality may evolve over time.

Autonomy Adaptive Capacity Smallholder Farmers CIENCIAS AGROPECUARIAS Y BIOTECNOLOGÍA POLICIES SMALLHOLDERS AGRICULTURAL PRACTICES

Tensile behavior of 3D printed polylactic acid (PLA) based composites reinforced with natural fiber

Eliana M Agaliotis BALTAZAR DAVID AKE CONCHA ALEJANDRO MAY PAT Juan Pablo Morales Arias Celina Bernal Alex Valadez González Pedro Jesús Herrera Franco Gwenaelle Proust JUAN FRANCISCO KOH DZUL José Gonzalo Carrillo Baeza Emmanuel Alejandro Flores Johnson (2022, [Artículo])

Natural fiber-reinforced composite (NFRC) filaments for 3D printing were fabricated using polylactic acid (PLA) reinforced with 1–5 wt% henequen flour comprising particles with sizes between 90–250 μm. The flour was obtained from natural henequen fibers. NFRCs and pristine PLA specimens were printed with a 0° raster angle for tension tests. The results showed that the NFRCs’ measured density, porosity, and degree of crystallinity increased with flour content. The tensile tests showed that the NFRC Young’s modulus was lower than that of the printed pristine PLA. For 1 wt% flour content, the NFRCs’ maximum stress and strain to failure were higher than those of the printed PLA, which was attributed to the henequen fibers acting as reinforcement and delaying crack growth. However, for 2 wt% and higher flour contents, the NFRCs’ maximum stress was lower than that of the printed PLA. Microscopic characterization after testing showed an increase in voids and defects, with the increase in flour content attributed to particle agglomeration. For 1 wt% flour content, the NFRCs were also printed with raster angles of ±45° and 90° for comparison; the highest tensile properties were obtained with a 0° raster angle. Finally, adding 3 wt% content of maleic anhydride to the NFRC with 1 wt% flour content slightly increased the maximum stress. The results presented herein warrant further research to fully understand the mechanical properties of printed NFRCs made of PLA reinforced with natural henequen fibers. © 2022 by the authors.

POLYLACTIC ACID (PLA) NATURAL FIBER HENEQUEN FIBER NATURAL FIBER REINFORCED COMPOSITE (NFRC) ADDITIVE MANUFACTURING 3D PRINTING MECHANICAL PROPERTY INGENIERÍA Y TECNOLOGÍA CIENCIAS TECNOLÓGICAS TECNOLOGÍA DE MATERIALES PROPIEDADES DE LOS MATERIALES PROPIEDADES DE LOS MATERIALES

Modernidad, seguridad y corrupción : control de drogas en México durante la posguerra (1946-1949)

Andrea Olvera (2021, [Tesis de doctorado])

"Esta tesis analiza mediante diversas fuentes de archivo y hemerográficas cuáles fueron las transformaciones y permanencias que se dieron en el control de las drogas en México entre 1946 a 1948, que se caracterizó por su prohibición, criminalización y judicialización. Lo cual, estuvo enmarcado en el contexto de la posguerra y la consolidación de un régimen autoritario en el país".

Narcóticos; Control; México; Aspectos sociales; Historia; Drogas; Abuso; Aspectos sanitarios; Corrupción (En política); Política y gobierno; 1946-1952 CIENCIAS SOCIALES HISTORIA HISTORIA DE PAÍSES HISTORIA DE PAÍSES

Reconocimiento continuo de la Lengua de Señas Mexicana

Continuous recognition of Mexican Sign Language

Ricardo Fernando Morfín Chávez (2023, [Tesis de maestría])

La Lengua de Señas Mexicana (LSM) es la lengua utilizada por la comunidad Sorda en México, y, a menudo, subestimada y pasada por alto por la comunidad oyente, lo que resulta en la exclusión sistemática de las personas Sordas en diversos aspectos de la vida. Sin embargo, la tecnología puede desempeñar un papel fundamental en acercar a la comunidad Sorda con la comunidad oyente, promoviendo una mayor inclusión y comprensión entre ambas. El objetivo principal de este trabajo es diseñar, implementar y evaluar un sistema de reconocimiento continuo de señas estáticas en LSM mediante, visión por computadora y técnicas de aprendizaje máquina. Se establecieron objetivos específicos, que incluyen la generación de un conjunto de datos de señas estáticas, pertenecientes al alfabeto manual de la LSM, el diseño de un modelo de reconocimiento, y la evaluación del sistema, tanto en la modalidad aislada como en la continua. La metodología involucra dos evaluaciones distintas. La primera se enfoca en el reconocimiento de señas estáticas en el dominio aislado, para ello se capturaron datos de 20 participantes realizando movimientos de la mano en múltiples ángulos. Se evaluaron diversas técnicas de aprendizaje automático, destacando que el enfoque basado en Máquinas de Soporte Vectorial (SVM) obtuvo los mejores resultados (F1-Score promedio del 0.91). La segunda evaluación se concentra en el reconocimiento continuo de señas estáticas, con datos recopilados de seis participantes con diferentes niveles de competencia en LSM, logrando un rendimiento sólido con errores cercanos al 7 %. Además, se evaluó la viabilidad del sistema en aplicaciones de tiempo real, demostrando un excelente desempeño (velocidad promedio de procesamiento de 45 cuadros por segundo). A pesar de los logros alcanzados, es importante reconocer que este proyecto se centró en el reconocimiento continuo de señas estáticas en LSM. Queda pendiente, como un desafío interesante, la exploración del reconocimiento continuo de señas dinámicas en LSM para futuras investigaciones. Se considera esencial explorar enfoques orientados a la escalabilidad y aplicaciones en tiempo real en investigaciones posteriores.

This study focuses on the continuous recognition of static signs in Mexican Sign Language (Lengua de Señas Mexicana (LSM)), the language used by the Deaf community in Mexico. Despite its significance, LSM is often underestimated and overlooked, leading to the systematic exclusion of Deaf individuals in various aspects of life. The primary objective of this work is to design, implement, and evaluate a continuous static sign recognition system in LSM using computer vision and machine learning techniques. Specific goals were established, including the creation of a dataset of static signs belonging to the manual alphabet of LSM, the design of a recognition model, and the evaluation of the system in both isolated and continuous modes. The methodology involves two distinct evaluations. The first one focuses on the recognition of static signs in the isolated domain, for which data from 20 participants performing hand movements at various angles were collected. Various machine learning techniques were evaluated, with the Máquinas de Soporte Vectorial (SVM)-based approach achieving the best results (average F1-Score of 0.91). The second evaluation centers on the continuous recognition of static signs, using data collected from six participants with varying levels of competence in LSM, achieving robust performance with errors close to 7 %. Furthermore, the feasibility of the system in real-time applications was assessed, demonstrating excellent performance (average processing speed of 45 frames per second). Despite the achievements, it is important to recognize that this project focused on continuous recognition of static signs in LSM. It remains an interesting challenge to explore the continuous recognition of dynamic signs in LSM for future research. It is considered essential to explore scalability-oriented approaches and real-time applications in subsequent investigations.

Lengua de Señas Mexicana (LSM), visión por computadora, aprendizaje automático, alfabeto manual de la LSM, reconocimiento automático de señas estáticas, reconocimiento aislado de señas, reconocimiento continuo de señas, aplicacion Mexican Sign Language (LSM), computer vision, machine learning, LSM manual alpahbet, automatic recognition of static signs, isolated sign recognition, continuous sign recognition, real-time aplications INGENIERÍA Y TECNOLOGÍA CIENCIAS TECNOLÓGICAS TECNOLOGÍA DE LOS ORDENADORES ENSEÑANZA CON AYUDA DE ORDENADOR ENSEÑANZA CON AYUDA DE ORDENADOR

Maintenance of Coastal Surface Blooms by Surface Temperature Stratification and Wind Drift

MARY CARMEN RUIZ DE LA TORRE (2013, [Artículo])

Algae blooms are an increasingly recurrent phenomenon of potentially socio-economic impact in coastal waters globally and in the coastal upwelling region off northern Baja California, Mexico. In coastal upwelling areas the diurnal wind pattern is directed towards the coast during the day. We regularly found positive Near Surface Temperature Stratification (NSTS), the resulting density stratification is expected to reduce the frictional coupling of the surface layer from deeper waters and allow for its more efficient wind transport. We propose that the net transport of the top layer of approximately 2.7 kilometers per day towards the coast helps maintain surface blooms of slow growing dinoflagellate such as Lingulodinium polyedrum. We measured: near surface stratification with a free-rising CTD profiler, trajectories of drifter buoys with attached thermographs, wind speed and direction, velocity profiles via an Acoustic Doppler Current Profiler, Chlorophyll and cell concentration from water samples and vertical migration using sediment traps. The ADCP and drifter data agree and show noticeable current shear within the first meters of the surface where temperature stratification and high cell densities of L. polyedrum were found during the day. Drifters with 1m depth drogue moved towards the shore, whereas drifters at 3 and 5 m depth showed trajectories parallel or away from shore. A small part of the surface population migrated down to the sea floor during night thus reducing horizontal dispersion. The persistent transport of the surface bloom population towards shore should help maintain the bloom in favorable environmental conditions with high nutrients, but also increasing the potential socioeconomic impact of the blooms. The coast wise transport is not limited to blooms but includes all dissolved and particulate constituents in surface waters. © 2013 Ruiz-de la Torre et al.

chlorophyll, algal bloom, article, cell count, cell density, coastal waters, controlled study, dinoflagellate, Lingulodinium polyedrum, meteorological phenomena, Mexico, near surface temperature stratification, nonhuman, nutrient concentration, popul CIENCIAS FÍSICO MATEMÁTICAS Y CIENCIAS DE LA TIERRA CIENCIAS DE LA TIERRA Y DEL ESPACIO OCEANOGRAFÍA OCEANOGRAFÍA

A simple extension to the CMASA method for the prediction of catalytic residues in the presence of single point mutations

David Israel Flores Granados (2014, [Artículo])

The automatic identification of catalytic residues still remains an important challenge in structural bioinformatics. Sequence-based methods are good alternatives when the query shares a high percentage of identity with a well-annotated enzyme. However, when the homology is not apparent, which occurs with many structures from the structural genome initiative, structural information should be exploited. A local structural comparison is preferred to a global structural comparison when predicting functional residues. CMASA is a recently proposed method for predicting catalytic residues based on a local structure comparison. The method achieves high accuracy and a high value for the Matthews correlation coefficient. However, point substitutions or a lack of relevant data strongly affect the performance of the method. In the present study, we propose a simple extension to the CMASA method to overcome this difficulty. Extensive computational experiments are shown as proof of concept instances, as well as for a few real cases. The results show that the extension performs well when the catalytic site contains mutated residues or when some residues are missing. The proposed modification could correctly predict the catalytic residues of a mutant thymidylate synthase, 1EVF. It also successfully predicted the catalytic residues for 3HRC despite the lack of information for a relevant side chain atom in the PDB file. © 2014 Flores et al.

1UU9 protein, 3HRC protein, protein, thymidylate synthase, unclassified drug, protein kinase, thymidylate synthase, accuracy, algorithm, Article, CMASA, CMASA Substitution Matrix, Contact Matrix Average Deviation, controlled study, correlation coeffi CIENCIAS FÍSICO MATEMÁTICAS Y CIENCIAS DE LA TIERRA MATEMÁTICAS ANÁLISIS NUMÉRICO ANÁLISIS NUMÉRICO

Expansión poblacional reciente en la historia evolutiva de la anchoveta de California Engraulis mordax

Recent population expansion in the evolutionary history of the Californian anchovy Engraulis mordax

NOE DIAZ VILORIA LAURA SANCHEZ VELASCO RICARDO PEREZ ENRIQUEZ (2012, [Artículo])

"La anchoveta de California Engraulis mordax, es una especie templada que pudo haber pasado por un proceso de disyunción poblacional, debido al proceso postglacial de calentamiento del agua alrededor de la punta de la península de Baja California, hace unos 10,000 años. Se realizó un análisis genético para probar la hipótesis nula de homogeneidad genética entre el Golfo de California, México y el sur de California, EUA y si este era el caso, estimar el tiempo de surgimiento de haplotipos en términos de coalescencia. Se analizaron en total 80 secuencias de la región control hipervariable (ADNmt) de E. mordax, capturadas en la región central del Golfo de California (n = 40) y el sur de California (n = 40). A pesar del gran número de haplotipos únicos, no se observó diferenciación genética significativa entre localidades (FST = –0.0025, p = 0.686). Una distribución unimodal en la frecuencia del número de diferencias entre haplotipos indica un modelo de expansión rápida en el tamaño poblacional, que basado en una tasa mutacional de 3.6% por millón de años para la región control, indicó un tiempo de diferenciación nucleotídica relativamente reciente de aproximadamente 61,000 años. Este periodo de tiempo corresponde al Pleistoceno tardío, después de la formación de la península de Baja California, sugiriendo expansiones poblacionales en cada una de las localidades, seguidas del último episodio de glaciación, el cual quizás contribuyó a la migración de esta especie de afinidad templada entre las dos localidades y a su homogenización genética. Sin embargo este único evento reciente de flujo genético en la historia evolutiva de la especie, no explica por sí solo los patrones de distribución encontrados en las frecuencias de diferencias nucleotídicas."

"The Californian anchovy Engraulis mordax, a temperate species, may have undergone a process of population disjunction from experiencing post-glacial water heating processes around the tip of the Baja California Peninsula, Mexico about 10,000 b.p. A genetic analysis was performed to test the null hypothesis of genetic homogeneity between the Gulf of California and Southern California, U. S. A., and if this is the case, to estimate the time of haplotype emergence in terms of coalescence. A total of 80 sequences of the mtDNA hypervariable control region of E. mordax captured in the central Gulf of California (n = 40) and Southern California (n = 40) were analyzed. In spite of the large number of private haplotypes, no significant genetic differentiation among sites (FST = –0.0025, p = 0.686) was observed. An unimodal distribution of mismatch frequency between haplotypes indicated a model of rapid expansion in population size that, based on a mutation rate of 3.6% per million years in the control region, indicates a relatively recent nucleotide differentiation

time of approximately 61,000 years. This time period corresponds to the late Pleistocene, suggesting population expansions at each locality, followed by the last episode of glaciation, which may have contributed to migration of this temperate-affinity species between two locations and the genetic homogenization. However this unique recent event of gene flow in the evolutionary history of species does not explain by itself the mismatch distribution patterns found."

ADN mitocondrial, expansión poblacional reciente, flujo genético, región control, reloj molecular. Control region, gene flow, mitochondrial DNA, molecular clock, recent population expansion. BIOLOGÍA Y QUÍMICA CIENCIAS DE LA VIDA BIOLOGÍA ANIMAL (ZOOLOGÍA) ZOOLOGÍA MARINA ZOOLOGÍA MARINA

Estimación multivariada espacio-tiempo de la carga hidráulica en el valle de Querétaro-Obrajuelo

EDGAR YURI MENDOZA CAZARES GRACIELA DEL SOCORRO HERRERA ZAMARRON (2007, [Artículo])

En el presente trabajo se utilizó un método de estimación multivariada espacio-temporal, considerando la carga hidráulica en diferentes años como variables diferentes, pero correlacionadas temporalmente. Este tipo de método permite aumentar la información utilizada en la estimación de la carga hidráulica para cada año. El método se aplicó para estimar la carga hidráulica en tres años diferentes en el acuífero del valle de Querétaro-Obrajuelo, México, obteniéndose buenos resultados en la validación cruzada y en el sentido de que al utilizar la información de los tres años conjuntamente se pueden observar claramente características de las configuraciones de las cargas que no se obtienen cuando únicamente se utilizan los datos del año estimado.

Análisis multivariado Carga hidráulica Geoestadística Querétaro CIENCIAS FÍSICO MATEMÁTICAS Y CIENCIAS DE LA TIERRA

Estimación espacio-temporal de la carga hidráulica utilizando el concepto de función aleatoria espacio-tiempo

EDGAR YURI MENDOZA CAZARES GRACIELA DEL SOCORRO HERRERA ZAMARRON (2010, [Artículo])

En este trabajo se presenta un método geoestadístico para realizar estimaciones espacio-temporales y se aplica a la estimación de la carga hidráulica del acuífero de Querétaro-Obrajuelo en el periodo 1981-2004. Las estimaciones para los años 1993, 1995 y 1999 se comparan con las de los métodos de krigeado ordinario y krigeado multivariado, utilizando el método de validación cruzada, reportándose los valores del error medio, error cuadrático medio y error cuadrático medio estándar. Los resultados de las varianzas del valor estimado son siempre más pequeños utilizando el método espacio-temporal, ya que utiliza más información para la estimación; asimismo, es posible hacer las estimaciones en todo el espacio para todos los tiempos. Se concluyó que la herramienta es poderosa, porque considera toda la información disponible al efectuar las estimaciones.

Análisis multivariado Carga hidráulica Geoestadística Querétaro CIENCIAS FÍSICO MATEMÁTICAS Y CIENCIAS DE LA TIERRA

Asistencia técnica para la introducción de tecnologías apropiadas de saneamiento y tratamiento de aguas residuales en la operación del Programa Hábitat-Sedesol de la Secretaría de Desarrollo Social, México

ROBERTO ROMERO PEREZ DENISE SOARES Ana Cecilia Tomasini Ortiz GABRIELA MANTILLA MORALES ARMANDO RIVAS HERNANDEZ DANIEL MURILLO LICEA (2012, [Documento de trabajo])

El objetivo de este proyecto multianual ha sido brindar asistencia técnica y apoyar en la ejecución de dos proyectos piloto sobre tecnologías alternativas para el tratamiento de aguas residuales, en dos polígonos Hábitat de México; buscando así incentivar el uso de tecnologías alternativas para la dotación de agua potable y saneamiento en zonas carentes de estos servicios. En este informe se incluyen los resultados de la visita a 15 polígonos Hábitat, para la identificación de los sitios idóneos para el proyecto.

Tecnología apropiada Tratamiento de aguas residuales Saneamiento Zonas urbanas Areas de pobreza Informes de proyectos Morelos Puebla Querétaro CIENCIAS SOCIALES