Simulación y validación de la reparación de ductos en servicio por la deposición directa de soldadura

LUIS DANTE MELENDEZ MORALES (2023, [Tesis de doctorado])

El transporte de hidrocarburos por ductos enterrados es la forma más segura, confiable y económica para su suministro, estos pueden extenderse grandes longitudes territoriales e inclusive atravesar países con tal de satisfacer la demanda energética. No obstante, los ductos pueden sufrir daños provocados por el ambiente, su operación o bien provocados por terceros, siendo necesario que sean intervenidos reemplazando las secciones dañadas. Las regulaciones nacionales y tratados internacionales desalientan la liberación de grandes cantidades de gas natural a la atmósfera, por demás de que un paro de suministro conlleva a desabasto energético, multas y a costosas operaciones asociadas con la rehabilitación del ducto, forzando a soldar envolventes y accesorios sin detener la operación de los ductos, esto se conoce como “soldadura en servicio”. La soldadura en servicio es un proceso tecnológico, por el cual se puede efectuar la interconexión y la reparación de ductos mientras están en operación, previo a realizar estas actividades, se requiere que dos riesgos sean evaluados: agrietamiento por hidrógeno y quemada pasante. Las simulaciones actuales y validaciones evalúan estos riesgos de forma independiente, pero debido a su interdependencia estos riesgos deben evaluarse en conjunto. Un método de reparación que no es normalmente empleado, pero con un alto potencial debido a su simplicidad y versatilidad, es la deposición directa de soldadura. En la presente investigación, se realizó una simulación numérica fluido-termo-mecánica acoplada con validación experimental, de la reparación de un tubo con flujo presurizado conteniendo un defecto interno por la deposición directa de soldadura. Por medio de la cual, es posible predecir el comportamiento estructural del ducto mientras se realiza la reparación.

La simulación numérica se efectuó con el apoyo del software ANSYS versión académica 22R2, siendo esta una herramienta de última generación capaz de contribuir en la predicción de mecanismos complejos como lo es la soldadura en servicio, incrementando con ello la seguridad y confiabilidad de estas operaciones. Cabe hacer mención, que la regulación nacional prohíbe la reparación de defectos internos por la deposición directa de soldadura, esto se debe principalmente a la falta de investigaciones validadas que respalden su viabilidad. Los resultados demostraron la efectividad de emplear este método de reparación para restaurar la resistencia mecánica de los ductos. Las inspecciones por pruebas no destructivas superficiales, subsuperficiales y volumétricas, evidenciaron que no ocurrió agrietamiento inmediatamente al finalizar la reparación y retardada (posterior a por lo menos 12 horas después de haberse finalizada la reparación, tiempo suficiente para permitir la difusión de hidrógeno atómico a hidrógeno molecular). Las curvas de tendencia de temperatura mostraron buena aproximación teniéndose una diferencia máxima de 5.09% entre los resultados numéricos y experimental. Los resultados numéricos y experimentales de la deformación perimetral a lo largo de la longitud de la tubería mostraron un comportamiento similar con una diferencia significativa del 17.7% entre los valores numéricos atribuidos a la falta de información de entrada para las propiedades de la soldadura. El análisis estructural efectuado en este estudio emplea la estimación del riesgo de quemada pasante bajo presión interna, determinado por la ocurrencia de abultamiento radial localizado. Los resultados numéricos indican que no ocurre deformación plástica relevante. Se hace una fuerte recomendación para que las evaluaciones de análisis térmico empleen la morfología actual del defecto y no solo consideren el espesor remanente del tubo. De acuerdo con la revisión bibliográfica realizada y recientemente publicada, este tipo de simulación numérica acoplada con validación experimental de la reparación de ductos en servicio por deposición directa de soldadura para la reparación de defectos internos contemplando la prevención de quemada pasante y agrietamiento por hidrógeno no ha sido realizada con anterioridad.

Hydrocarbon transportation by buried pipelines is the safest, most reliable, and economical way for its supply; these can extend long territorial distances and even cross countries with the purpose of satisfying the energy demand. However, the pipelines can suffer damages caused by their environment, their operation, or provoked by third parties, making necessary interventions to replace the damaged sections. National regulations and international agreements discourage the release of large quantities of natural gas into the atmosphere; moreover, a stop in its supply entails an energetic shortage, fines, and expensive operations associated with the pipeline rehabilitation, forcing to weld sleeves and fittings without stop the pipeline operation, this is known as “In-Service Welding”. In-Service welding is a technological process for which interconnection and repair of pipelines can be made while they are in operation; before making it, two main risks need to be assessed: hydrogen cracking and burn-through. Current simulations and validations assess these risks independently, but due to their interdependence, these risks need to be assessed in conjunction. A repair method not normally used but with high potential due to its simplicity and versatility is the direct deposition of the weld. In the present research, a fluid-thermo-mechanical coupled numerical simulation with experimental validation was done of a repair on a pipe with pressurized flow having an internal defect by direct deposition of the weld. It is possible predict the structural behavior of a pipeline while the reparation is performed.

The numerical simulation was done with the support of ANSYS software academic version 22R2, the latest generation tool able to contribute to the prediction of complex mechanisms, as is in-service welding, increasing the security and confidence of these operations. It is worth mentioning that national regulation forbids the reparation of internal defects for direct deposition of the weld; the main reason is the lack of validated investigations supporting its viability. The results demonstrated the effectiveness of using this repair method to restore the mechanical strength of pipelines. Surface, sub-surface, and volumetric non-destructive inspections evidenced no cracking immediately to finish the repair and delayed (after at least 12 hours of having finished the repair, time enough to allow the hydrogen diffusion from atomic hydrogen to molecular hydrogen). Temperature tendency curves showed good approximations, having a maximum difference of 5.09 % between numerical and experimental. Perimeter deformation along the pipe length between numerical and experimental results displayed a similar behavior with a significant difference of 17.7% against numerical values attributed to the lack of input data for weld properties. The structural analysis performed in this study used the approach of the risk of burn-through under internal pressure determined by the occurrence of localized radial bulging. Numerical results indicated no relevant plastic strain occurs. It is strongly recommended that thermal analysis assessments using the actual defect morphology be performed, not only considering the remaining thickness of the pipe. According to the bibliographic revision performed and recently published, this kind of coupled numerical simulation of in-service repair or pipelines by direct deposition for repairing internal defects considering the prevention of burn-through and hydrogen cracking has not been done.

Ducto Soldadura en servicio Quemada pasante Agrietamiento por hidrógeno Reparación de soldadura Simulación numérica Pipeline In-service welding Burn-through Hydrogen cracking Weld repair Numerical simulation INGENIERÍA Y TECNOLOGÍA CIENCIAS TECNOLÓGICAS OTRAS ESPECIALIDADES TECNOLÓGICAS OTRAS ESPECIALIDADES TECNOLÓGICAS

In-service weld repair by direct deposition: numerical simulation and experimental validation

LUIS DANTE MELENDEZ MORALES Jose Jorge Ruiz Mondragon MARICRUZ HERNANDEZ HERNANDEZ (2023, [Artículo])

In-Service Welding is a technological process for which interconnection and repair of pipelines can be made while they are in operation, before making it two main risks need to be assessed: hydrogen cracking and burn-through. Current simulations and validations assess these risks independently, but due to its interdependence these risks need to be assessed in conjunction. A repair method not normally used, but with high potential due to its simplicity and versatility is the direct deposition of weld. In the present research, a fluid-thermo-mechanical coupled simulation and validation were done of an in-service welding repair by direct deposition on a flowing pressurized pipe having an internal defect. The results demonstrated the effectiveness of using this repair method to restore the mechanical strength of pipelines. Surface, sub-surface, and volumetric non-destructive examinations evidenced no cracking immediately to finish the repair and delayed. Temperature tendency curves showed good approximations having a maximum difference of 5.09 % between numerical and experimental. Perimeter deformation along the pipe length between numerical and experimental results displayed a similar behaviour with a significant difference in the numerical values attributed to the lack of input data for weld properties. The structural analysis performed in this study used the approach of the risk of burn-through under internal pressure determined by the occurrence of localized radial bulging. Numerical results indicated no relevant plastic strain occurs. Is strongly recommended that thermal analysis assessments using the actual defect morphology would be performed, not only considering the remaining thickness of the pipe.

Declaration of Competing Interest: The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper.

Acknowledgements: The authors gratefully acknowledge to Petropipe de Mexico for technical support, materials and equipment needed for the experimental validation. The first author wants also to acknowledge to CONAHCYT (Consejo Nacional de Humanidades, Ciencias y Tecnologías), for the post-graduate scholarship received.

In-service welding Burn-through Hydrogen cracking Weld repair INGENIERÍA Y TECNOLOGÍA CIENCIAS TECNOLÓGICAS OTRAS ESPECIALIDADES TECNOLÓGICAS OTRAS OTRAS

Interaction between plants growing together from germination to 2 years: A test of competition and phylogenetic closeness for Northeastern Mexico

Interacción entre plantas coexistiendo desde la germinación hasta los 2 años: un experimento de competencia y cercanía filogenética en el noreste de México

ENRIQUE JURADO YBARRA Joel David Flores Rivas Jonathan Marroquín MARISELA PANDO MORENO DAVID ALBERTO RODRIGUEZ TRAPERO Humberto González Rodríguez José Alejandro Selvera Mancha Juan Ángel López Carmona (2022, [Artículo])

"Competition and facilitation are important factors affecting seedling survival. These factors probably affect plant distribution and abundance. Interactions between species relate to phylogeny, in that closely related species are likely to compete more for resources and facilitation is expected between more distantly related species. We tested for Tamaulipan thornscrub plants, grown with close and distant relatives if they differed in survival, length and weight of shoots and roots, assuming that closely related species would compete more than distant ones. We also explored whether seed mass was associated with plant size from 1-24 months after germination. We grew plants from Tamaulipan thornscrub, with a sibling or with one individual from other species from 1-24 months. Seedling survival was similar for all species when their seedlings grew alone or under competition, at 1, 6 and 12 months. At 24 months seedling survival of Vachellia farnesiana was lower when grown with Havardia pallens. There was no evidence of stronger competition or facilitation for phylogenetically closer species. Seedling size correlated with seed mass one month after germination but not after 6 months. Maximum and mean adult plant height did not correlate with seed mass or with plant height in our trials. We found no evidence of phylogeny explaining nearest neighbors in competition during germination for Tamaulipan thornscrub."

"La competencia y la facilitación son factores importantes que afectan la supervivencia de las plántulas y probablemente afectan la distribución y abundancia de las plantas. Las interacciones entre especies se relacionan con la filogenia, es probable que las especies estrechamente relacionadas compitan más por recursos y que en las menos emparentadas ocurra facilitación. Se investigó si plantas de matorral tamaulipeco creciendo junto a parientes cercanos y lejanos diferían en supervivencia, longitud y peso de tallos y raíces, asumiendo que las especies estrechamente relacionadas competirían más que las lejanas. También se exploró si el peso de semillas se asoció con el tamaño de la planta entre 1 y 24 meses de edad. Se pusieron a crecer plantas de matorral tamaulipeco, con un hermano o con un individuo de otras especies, de 1-24 meses. La supervivencia de plántulas fue similar para todas las especies cuando éstas crecieron solas o en competencia, a los 1, 6 y 12 meses. A los 24 meses, la supervivencia de plántulas de Vachellia farnesiana fue menor cuando creció con Havardia pallens. No hubo evidencia de una competencia o facilitación fuerte para especies filogenéticamente más cercanas. El tamaño de la plántula se correlacionó con el peso de la semilla únicamente al mes de germinadas. La altura máxima y promedio de la planta adulta no se correlacionó con el peso de semillas o con la altura de la planta. La filogenia no explicó la competencia con los vecinos más cercanos durante la germinación de especies del matorral tamaulipeco."

Phylogeny Seed mass Seedling Shoot/root ratio Tamaulipan thornscrub BIOLOGÍA Y QUÍMICA CIENCIAS DE LA VIDA BIOLOGÍA VEGETAL (BOTÁNICA) BIOLOGÍA VEGETAL (BOTÁNICA)

Obtención de materiales nanocompuestos semiconductorsemiconductor para producción de hidrógeno por fotocatálisis heterogénea

Obtaining semiconductor-semiconductor nanocomposite materials for hydrogen production by heterogeneous photocatalysis

Yilmair Rodríguez Santillán (2023, [Tesis de maestría])

La producción de hidrógeno mediante fotocatálisis heterogénea a través del fotorreformado de metanol ha surgido como una estrategia para abordar los desafíos energéticos y ambientales actuales. Este proceso combina la conversión de una mezcla metanol/agua, con la eficiencia de la fotocatálisis para generar hidrógeno limpio y renovable. Uno de los factores más importantes en el proceso de la fotocatálisis heterogénea, es la capacidad que presenta un semiconductor para absorber luz con energía dentro del rango del espectro visible. El g-C3N4 es uno de los materiales más estudiados recientemente para la producción de hidrógeno, ya que presenta una banda prohibida de 2.7 eV, aparte de una alta estabilidad química y térmica, así como un bajo costo de producción. Sin embargo, el g-C3N4 tiene limitaciones en su eficiencia debido a la rápida recombinación del par electrón/hueco (e- /h+), lo que reduce la tasa de producción de H2. Para superar esta limitación se suelen hacer modificaciones por medio de dopantes o formando uniones con otros semiconductores, como las que se hicieron en este trabajo. El nanocompuesto que se utilizó para la producción de H2 mediante el fotorreformado de metanol es el Pt/MnCo2S4/B-g-C3N4 que consiste en una estructura formada por nitruro de carbono grafítico dopado con boro (B-g-C3N4), sulfuro de manganeso-cobalto (MnCo2S4) y platino (Pt). El B-g-C3N4 actúa como el fotocatalizador clave en la reacción de producción de H2 ya que cuenta con una estructura de banda electrónica adecuada que le permite absorber luz solar y generar pares (e-/h+) para activar la reacción. El MnCo2S4 se empleó para favorecer la separación y migración de los portadores de carga. El papel del Pt fue el de acelerar la reacción de reducción para la formación de la molécula de H2. La serie de fotocatalizadores de Pt/MnCo2S4/B-g-C3N4 que fueron sintetizados, demostraron una alta estabilidad y actividad fotocatalítica en la producción de hidrógeno a partir del fotorreformado de metanol/agua, tanto en condiciones con luz UV como en condiciones con luz visible, permitiendo alcanzar una producción de 947.9 μmol g-1 h-1 y 716.4 μmol g-1 h- respectivamente.

Hydrogen production through heterogeneous photocatalysis via methanol photoreforming has emerged as a strategy to address current energy and environmental challenges. This process combines the conversion of a methanol/water mixture with the efficiency of photocatalyst to generate clean and renewable hydrogen. One of the most crucial factors in the heterogeneous photocatalysis process is the semiconductor's ability to absorb light within the visible spectrum energy range. Recently, g-C3N4 has been extensively studied for hydrogen production due to its 2.7 eV bandgap, high chemical and thermal stability, and low production cost. However, g-C3N4 has limitations in its efficiency due to the rapid recombination of electron/hole pairs (e-/h+), which reduces the H2 production rate. To overcome this limitation, modifications are often made through dopants or forming junctions with other semiconductors, as is done in this study. The nanocomposite used for hydrogen production via methanol photoreforming is Pt/MnCo2S4/B-g-C3N4, which consists of a structure composed of borondoped graphitic carbon nitride (B-g-C3N4), manganese-cobalt sulfide (MnCo2S4) and platinum (Pt). B-gC3N4 acts as the critical photocatalyst in the H2 production reaction. It possesses an appropriate electronic band structure that absorbs solar light and generates electron-hole pairs (e-/h+) to activate the reaction. MnCo2S4 was used to promote the separation and migration of charge carriers. The role of Pt is to accelerate the reduction reaction to form H2 molecules. The series of synthesized Pt/MnCo2S4/B-g-C3N4 photocatalysts demonstrated high stability and photocatalytic activity in hydrogen production via methanol/water photoreforming, both under UV and visible light conditions, achieving a production rate of 947.9 μmol g-1 h-1 and 716.4 μmol g-1 h-1, respectively.

hidrógeno, fotocatálisis, fotorreformado, metanol, nanocompuesto hydrogen, photocatalyst, photoreforming, methanol, nanocomposite INGENIERÍA Y TECNOLOGÍA CIENCIAS TECNOLÓGICAS TECNOLOGÍA DE MATERIALES PROPIEDADES DE LOS MATERIALES PROPIEDADES DE LOS MATERIALES

Análisis isotópico en plumas del Charrán mínimo (Sternula antillarum) para inferir su ecología trófica

Isotope analysis in feathers of the Least Tern (Sternula antillarum) to infer its trophic ecology

Andehui Danay Morales Flores (2024, [Tesis de maestría])

El análisis isotópico de plumas primarias utilizando las razones isotópicas δ13C y δ15N permitió estimar la amplitud y superposición del nicho trófico de los conjuntos de las colonias reproductivas de adultos y volantones del charrán mínimo. Se infirió la amplitud del nicho por medio del área de la elipse estándar estimada por métodos Bayesianos (SEAB), se encontró que existen diferencias entre el nicho trófico de adultos y volantones, pues los adultos tienen valores de la media SEAB de 16.3‰2 hasta 28.4‰2 y los volantones de 44.8‰2 hasta 75.5‰2, esto podría ser debido a diferencias en cuanto a las presas seleccionadas y la ubicación geográfica de los adultos durante la muda de las primarias. Por otro lado, la superposición del nicho indicó la similitud entre los adultos de diferentes colonias, por lo cual, se consideró que los adultos de algunas colonias podrían compartir un sitio de invernada o bien la temporalidad en la muda de las primarias. Además, se cumplió con el objetivo de caracterizar la variabilidad de las firmas isotópicas de carbono y nitrógeno durante el crecimiento secuencial de las plumas primarias por medio de los modelos aditivos generalizados y se observó la variabilidad entre las primarias utilizando las anomalías respecto a la media local de cada colonia, lo cual permitió diferenciar estrategias de alimentación específicas para ciertos conjuntos y la variabilidad en la dieta. La búsqueda bibliográfica de los sitios potenciales de migración en invierno más los mapas de gradientes isotópicos de δ13C permitió determinar que el Océano Pacífico Oriental Tropical es la región geográfica relacionada con la distribución δ13C en plumas primarias del charrán mínimo y es el sitio más probable de invernada.

The isotopic analysis of primary feathers using the isotopic ratios of δ13C and δ15N allowed the estimation of the breadth and overlap of the trophic niche of adult and fledgling least terns. Niche breadth was inferred through the standard ellipse area (SEAB) estimated by Bayesian methods. We found differences between the trophic niche of adults and fledglings, as adults presented mean SEAB values from 16.3‰2 to 28.4‰2 and fledglings from 44.8‰2 to 75.5‰2. This could be due to differences in the prey selected and the geographical location of the adults during the molt of the primaries. The overlap of these values among adults indicates similarity in prey selection and location between the adults of different colonies. Therefore, it was considered that the adults of some colonies could share a wintering site during the period of molt of the primary feathers. We characterized the variability of carbon and nitrogen isotopic signatures during the sequential growth of primary feathers through generalized additive models and the variability between primaries using the anomalies of these signatures and the local mean for each colony. This allowed us to differentiate specific feeding strategies of individual least terns and the variability in their diet. The bibliographic search for potential migration and wintering sites found published maps of δ13C isotopic gradients in the Tropical Eastern Pacific Ocean that correspond to the δ13C distribution in primary feathers of the least tern, indicating a potential wintering area for this species.

isótopos, carbono, nitrógeno, ave marina, ecología trófica isotopes, seabird, nitrogen, carbon, trophic ecology BIOLOGÍA Y QUÍMICA CIENCIAS DE LA VIDA BIOLOGÍA VEGETAL (BOTÁNICA) ECOLOGÍA VEGETAL ECOLOGÍA VEGETAL

Vibrissa growth rate in California sea lions based on environmental and isotopic oscillations

MARTHA PATRICIA ROSAS HERNANDEZ (2018, [Artículo])

Pinniped vibrissae provide information on changes in diet at seasonal and annual scales; however, species-specific growth patterns must first be determined in order to interpret these data. In this study, a simple linear model was used to estimate the growth rate of vibrissae from adult female California sea lions (Zalophus californianus) from San Esteban Island in the Gulf of California, Mexico. The δ15N and δ13C values do not display a marked oscillatory pattern that would permit direct determination of the time period contained in each vibrissa; thus, time (age) was calculated in two ways: 1) based on the correlation between the observed number of peaks (Fourier series) in the δ15N profile and the length of each vibrissa, and 2) through direct comparison with the observed number of peaks in the δ15N profile. Cross-correlation confirmed that the two peaks in the δ15N profile reflected the two peaks in the chlorophyll-a concentration recorded annually around the island. The mean growth rate obtained from the correlation was 0.08 ± 0.01 mm d-1, while that calculated based on the observed number of peaks was 0.10 ± 0.05 mm d-1. Both are consistent with the rates reported for adult females of other otariid species (0.07 to 0.11 mm d-1). Vibrissa growth rates vary by individual, age, sex, and species; moreover, small differences in the growth rate can result in significant differences over the time periods represented by the isotopic signal. Thus, it is important to assess this parameter on a species-by-species basis. © 2018 Rosas-Hernández et al. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.

carbon, nitrogen, animal, California, chemistry, diet, female, island (geological), Mexico, Otariidae, physiology, Animals, California, Carbon Isotopes, Diet, Female, Islands, Mexico, Nitrogen Isotopes, Sea Lions BIOLOGÍA Y QUÍMICA CIENCIAS DE LA VIDA INMUNOLOGÍA INMUNOLOGÍA

Vibrissa growth rate in California sea lions based on environmental and isotopic oscillations

MARTHA PATRICIA ROSAS HERNANDEZ (2018, [Artículo])

Pinniped vibrissae provide information on changes in diet at seasonal and annual scales; however, species-specific growth patterns must first be determined in order to interpret these data. In this study, a simple linear model was used to estimate the growth rate of vibrissae from adult female California sea lions (Zalophus californianus) from San Esteban Island in the Gulf of California, Mexico. The δ15N and δ13C values do not display a marked oscillatory pattern that would permit direct determination of the time period contained in each vibrissa; thus, time (age) was calculated in two ways: 1) based on the correlation between the observed number of peaks (Fourier series) in the δ15N profile and the length of each vibrissa, and 2) through direct comparison with the observed number of peaks in the δ15N profile. Cross-correlation confirmed that the two peaks in the δ15N profile reflected the two peaks in the chlorophyll-a concentration recorded annually around the island. The mean growth rate obtained from the correlation was 0.08 ± 0.01 mm d-1, while that calculated based on the observed number of peaks was 0.10 ± 0.05 mm d-1. Both are consistent with the rates reported for adult females of other otariid species (0.07 to 0.11 mm d-1). Vibrissa growth rates vary by individual, age, sex, and species; moreover, small differences in the growth rate can result in significant differences over the time periods represented by the isotopic signal. Thus, it is important to assess this parameter on a species-by-species basis. © 2018 Rosas-Hernández et al. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.

carbon, nitrogen, animal, California, chemistry, diet, female, island (geological), Mexico, Otariidae, physiology, Animals, California, Carbon Isotopes, Diet, Female, Islands, Mexico, Nitrogen Isotopes, Sea Lions CIENCIAS FÍSICO MATEMÁTICAS Y CIENCIAS DE LA TIERRA CIENCIAS DE LA TIERRA Y DEL ESPACIO OCEANOGRAFÍA OCEANOGRAFÍA

Usando la descomposición de un grafo Halin para el diseño de algoritmos autoestabilizantes

Using Halin graph decomposition for the design of self-stabilizing algorithm

Daniel Uriel Orozco Lomelí (2023, [Tesis de maestría])

Sea G = (V, E) un grafo no dirigido. El problema de encontrar un conjunto independiente fuerte en G, es identificar un conjunto S ⊆ V , tal que dados dos vértices arbitrarios de S, éstos estén separados entre sí por el menos tres aristas. Encontrar un conjunto S de tamaño máximo pertenece a la clase NP-Difícil. Por otro lado, el problema de encontrar un conjunto dominante total en G es identificar un conjunto D ⊆ V , tal que cualquier vértice en V tenga al menos un vecino que pertenezca a D. Encontrar un conjunto D de tamaño mínimo también pertenece a la clase NP-Difícil. En este trabajo de tesis se diseñaron dos algoritmos, uno que resuelve el problema de encontrar un conjunto independiente fuerte maximal y otro que resuelve el problema de encontrar un conjunto dominante total minimal. Estos dos problemas son menos restrictivos que las versiones de optimización descritas al principio de este texto y se sabe que pertenecen a la clase P. Los algoritmos diseñados corren en un sistema distribuido, son autoestabilizantes, son tolerantes a fallas transitorias y funcionan para grafos Halin. Los grafos Halin pertenecen a la clase de grafos 2-outerplanares y tienen la propiedad de que se pueden partir en dos subgrafos muy conocidos, un árbol y un ciclo. Los algoritmos propuestos aprovechan la propiedad anterior para disminuir la complejidad de los mismos. Hasta donde tenemos conocimiento, los algoritmos propuestos, que corren en tiempo lineal en el número de vértices, son los algoritmos más rápidos existentes para los problemas del conjunto independiente fuerte maximal y el conjunto dominante total minimal.

Let G = (V, E) be an undirected graph. The problem of finding a strong stable set in G, is to identify a set S ⊆ V , such that given two arbitrary vertices of S, they are separated from each other by at least three edges. Finding a set S of maximum size belongs to the class NP-Hard. On the other hand, the problem of finding a total dominanting set in G is to identify a set D ⊆ V , such that any vertex in V has at least one neighbor belonging to D. Finding a set D of minimum size also belongs to the class NP-Hard. In this thesis work, two algorithms were designed, one that solves the problem of finding a maximal strong stable set and one that solves the problem of finding a minimal total dominanting set. These two problems are less restrictive than the optimization versions described at the beginning of this text and are known to belong to the P class. The designed algorithms run on a distributed system, are self-stabilizing, are transient fault tolerant, and work for Halin graphs. Halin graphs belong to the 2-outerplanar class of graphs and have the property that they can be split into two well-known subgraphs, a tree and a cycle. The proposed algorithms take advantage of the above property to decrease the complexity of the algorithms. To the best of our knowledge, the proposed algorithms, which run in linear time in the number of vertices, are the fastest existing algorithms for the maximal strong stable set and minimal total dominating set problems.

Grafo Halin, Sistemas Distribuidos, Autoestabilización, Conjunto Independiente Fuerte, Conjunto Dominante Total Halin Graph, Distributed Systems, Self-stabilizing, Strong Stable Set, Total Dominating Set INGENIERÍA Y TECNOLOGÍA CIENCIAS TECNOLÓGICAS TECNOLOGÍA DE LOS ORDENADORES LENGUAJES ALGORÍTMICOS LENGUAJES ALGORÍTMICOS

Trophic ecology of Mexican Pacific harbor seal colonies using carbon and nitrogen stable isotopes

MARICELA JUAREZ RODRIGUEZ (2020, [Artículo])

There is limited information that provides a comprehensive understanding of the trophic ecology of Mexican Pacific harbor seal (Phoca vitulina richardii) colonies. While scat analysis has been used to determine the diet of some colonies, the integrative characterization of its feeding habits on broader temporal and spatial scales remains limited. We examined potential feeding grounds, trophic niche width, and overlap, and inferred the degree of dietary specialization using stable carbon and nitrogen isotope ratios (δ13C and δ15N) in this subspecies. We analyzed δ13C and δ15N on fur samples from pups collected at five sites along the western coast of the Baja California Peninsula, Mexico. Fur of natal coat of Pacific harbor seal pups begins to grow during the seventh month in utero until the last stage of gestation. Therefore pup fur is a good proxy for the mother's feeding habits in winter (∼December to March), based on the timing of gestation for the subspecies in this region. Our results indicated that the δ13C and δ15N values differed significantly among sampling sites, with the highest mean δ15N value occurring at the southernmost site, reflecting a well-characterized north to south latitudinal 15N-enrichment in the food web. The tendency identified in δ13C values, in which the northern colonies showed the most enriched values, suggests nearshore and benthic-demersal feeding habits. A low variance in δ13C and δ15N values for each colony (<1‰) and relatively small standard ellipse areas suggest a specialized foraging behavior in adult female Pacific harbor seals in Mexican waters. © 2020 Juárez-Rodríguez et al.

carbon, delta carbon 13, delta nitrogen 15, isotope, nitrogen, unclassified drug, carbon, nitrogen, Article, correlational study, feeding behavior, latitude, Mexico, nonhuman, organism colony, Pinnipedia, population abundance, species richness, troph BIOLOGÍA Y QUÍMICA CIENCIAS DE LA VIDA BIOLOGÍA ANIMAL (ZOOLOGÍA) BIOLOGÍA ANIMAL (ZOOLOGÍA)

High quality diet improves lipid metabolic profile and breeding performance in the blue-footed booby, a long-lived seabird

ERICK GONZALEZ MEDINA (2018, [Artículo])

Understanding the role of diet in the physiological condition of adults during reproduction and hence its effect on reproductive performance is fundamental to understand reproductive strategies in long-lived animals. In birds, little is known about the influence of the quality of food consumed at the beginning of the reproductive period and its short-term effects on reproductive performance. To assess the role of diet in the physiological condition of female blue-footed booby, Sula nebouxii (BFBO), during reproduction we evaluated whether individual differences in diet (assessed by using δ13C and δ15N values of whole blood from female birds and muscle tissue of the principal prey species) prior to egg laying and during incubation influenced their lipid metabolic profile (measured as triglyceride levels and C:N ratio) and their reproductive performance (defined by laying date, clutch size and hatching success). Females with higher δ15N values in their blood during the courtship and incubation periods had a higher lipid metabolic profile, earlier laying date, greater clutch size (2–3 eggs) and higher hatching success. Females that laid earlier and more eggs (2–3 eggs) consumed more Pacific anchoveta (Cetengraulis mysticetus) and Pacific thread herring (Opisthonema libertate) than did other females. These two prey species also had high amounts of lipids (C:N ratio) and caloric content (Kcal/g fresh weight). The quality of food consumed by females at the beginning of reproduction affected their physiological condition, as well as their short-term reproductive performance. Our work emphasizes the importance of determining the influence of food quality during reproduction to understand the reproductive decisions and consequences in long-lived animals. © 2018 González-Medina et al. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.

nitrogen 15, triacylglycerol, lipid, animal experiment, Article, breeding, carbon nitrogen ratio, clutch size, controlled study, courtship, diet, egg laying, female, food intake, hatching, lipid metabolism, muscle tissue, nonhuman, prey, reproduction CIENCIAS FÍSICO MATEMÁTICAS Y CIENCIAS DE LA TIERRA CIENCIAS DE LA TIERRA Y DEL ESPACIO OCEANOGRAFÍA OCEANOGRAFÍA