Búsqueda avanzada


Área de conocimiento




16 resultados, página 2 de 2

Tensile behavior of 3D printed polylactic acid (PLA) based composites reinforced with natural fiber

Eliana M Agaliotis BALTAZAR DAVID AKE CONCHA ALEJANDRO MAY PAT Juan Pablo Morales Arias Celina Bernal Alex Valadez González Pedro Jesús Herrera Franco Gwenaelle Proust JUAN FRANCISCO KOH DZUL José Gonzalo Carrillo Baeza Emmanuel Alejandro Flores Johnson (2022, [Artículo])

Natural fiber-reinforced composite (NFRC) filaments for 3D printing were fabricated using polylactic acid (PLA) reinforced with 1–5 wt% henequen flour comprising particles with sizes between 90–250 μm. The flour was obtained from natural henequen fibers. NFRCs and pristine PLA specimens were printed with a 0° raster angle for tension tests. The results showed that the NFRCs’ measured density, porosity, and degree of crystallinity increased with flour content. The tensile tests showed that the NFRC Young’s modulus was lower than that of the printed pristine PLA. For 1 wt% flour content, the NFRCs’ maximum stress and strain to failure were higher than those of the printed PLA, which was attributed to the henequen fibers acting as reinforcement and delaying crack growth. However, for 2 wt% and higher flour contents, the NFRCs’ maximum stress was lower than that of the printed PLA. Microscopic characterization after testing showed an increase in voids and defects, with the increase in flour content attributed to particle agglomeration. For 1 wt% flour content, the NFRCs were also printed with raster angles of ±45° and 90° for comparison; the highest tensile properties were obtained with a 0° raster angle. Finally, adding 3 wt% content of maleic anhydride to the NFRC with 1 wt% flour content slightly increased the maximum stress. The results presented herein warrant further research to fully understand the mechanical properties of printed NFRCs made of PLA reinforced with natural henequen fibers. © 2022 by the authors.

POLYLACTIC ACID (PLA) NATURAL FIBER HENEQUEN FIBER NATURAL FIBER REINFORCED COMPOSITE (NFRC) ADDITIVE MANUFACTURING 3D PRINTING MECHANICAL PROPERTY INGENIERÍA Y TECNOLOGÍA CIENCIAS TECNOLÓGICAS TECNOLOGÍA DE MATERIALES PROPIEDADES DE LOS MATERIALES PROPIEDADES DE LOS MATERIALES

El impacto de los mantenimientos preventivos en los sistemas fotovoltaicos interconectados a la red de distribución eléctrica

Kassandra Elizabeth López Esparza Raúl Pérez Bustamante GUILLERMO RAUL GARCIA FERRERA (2023, [Artículo])

La obligación de llevar un sistema o equipo a su máximo rendimiento y operación, así como la resolución de posibles fallas en el mismo, ha dado lugar a la necesidad de desarrollar un ámbito especializado dedicado exclusivamente a abordar estas obligaciones. De esto surge el campo del mantenimiento, cuyo propósito fundamental es asegurar el funcionamiento adecuado de los equipos o instalaciones en los cuales se lleva a cabo dicho trabajo, así como corregir y prevenir fallas o problemas en los sistemas en cuestión. El mantenimiento puede aplicarse en una amplia gama de sectores donde se necesite prevenir o corregir alguna operación, y en el caso del sector energético renovable esto no es una excepción. En particular, el mantenimiento de los sistemas fotovoltaicos interconectadas a la red (SFIR) busca llevar la instalación a su mejor zona de operación y funcionamiento para con esto asegurar la generación de energía. Es por esta razón, que el sector energético se ha unido al desarrollo de una rama que se dedique a la operación y mantenimiento (O&M) de los sistemas fotovoltaicos. En este artículo se exponen los resultados de un estudio de mantenimiento preventivo en una instalación fotovoltaica ubicada en el estado de Aguascalientes, el cual fue realizado por Sunna Power, una empresa dedicada a ofrecer servicios de mantenimiento a SFIR en México. El trabajo explorará el estado de la instalación previo al mantenimiento y su situación una vez que éste ha sido ejecutado. Aun cuando los SFIR requieren poco mantenimiento, este articulo pretende demostrar que a pesar de esto la implementación de un plan de mantenimiento en las instalaciones puede generar un impacto positivo en la producción de energía del sistema, mostrando los resultados obtenidos en el mantenimiento ejecutado en la instalación fotovoltaica.

The obligation to ensure that a system or piece of equipment achieves its maximum performance and functionality, and to correct any failures that may occur, has led to the need to develop a specialized field dedicated exclusively to meeting these obligations. This has given rise to the field of maintenance, the basic aim of which is to ensure the correct functioning of the equipment or installations on which the work is carried out, and to correct and prevent any failures or problems in the systems concerned; maintenance can be applied in a wide range of sectors where it is necessary to prevent or correct an operation, and the renewable energy sector is no exception. In particular, the maintenance of photovoltaic systems connected to the grid (SFIR) aims to bring the installation to its best operational and functional range in order to guarantee energy production; it is for this reason that the energy sector has participated in the development of a branch dedicated to the operation and maintenance (O&M) of photovoltaic systems. This article presents the results of a preventive maintenance study in a photovoltaic plant located in the state of Aguascalientes, carried out by Sunna Power, a company dedicated to providing maintenance services to SFIR in Mexico. The study examines the condition of the installation before maintenance and the situation after maintenance. Although SFIR requires little maintenance, this article aims to demonstrate that the implementation of a maintenance plan in the plants can nevertheless have a positive impact on the energy production of the system, displaying the results obtained in the maintenance carried out on the photovoltaic installation.

Mantenimiento preventivo Módulo fotovoltaico Plan de mantenimiento Sistema fotovoltaico Preventive maintenance Maintenance plan Photovoltaic system INGENIERÍA Y TECNOLOGÍA CIENCIAS TECNOLÓGICAS OTRAS ESPECIALIDADES TECNOLÓGICAS OTRAS OTRAS

Determinantes del comportamiento de queja del consumidor en México

Determinants of consumer complaint behavior in Mexico

IGNACIO JAVIER CRUZ RODRIGUEZ JAVIER GALAN FIGUEROA (2019, [Artículo])

El objetivo del trabajo es explicar los determinantes del comportamiento de queja del consumidor en los niveles socioeconómico y empresa. Para ello se acude a la metodología de datos de panel estático a fin de estimar el impacto de los determinantes de las quejas de los consumidores. Los resultados a nivel socioeconómico indican que las quejas se encuentran determinadas por el ingreso, las conciliaciones a favor de los consumidores y por la población residente en zonas urbanas. Mientras a nivel empresa los resultados muestran que tanto la cuota de mercado como el tamaño de la firma afectan positivamente las quejas. Se concluye que los resultados coinciden con la literatura revisada y que se puede esperar un aumento en el número de quejas presentadas por los consumidores.

This work aims to quantify the determinants of consumer complaint behavior in socioeconomic and business levels. For this purpose, the static panel data methodology is used in order to estimate the impact of consumer complaints both at the federal level of the Mexican Republic and at the level of the main companies that are considered leaders in their field. The results by the state indicate that the complaints are determined by income, reconciliations in favor of consumers and population residing in urban areas.While at the company level, the results show that both market share and company size positively affect consumer complaints. In conclusion, the results agree with the literature reviewed, and a rise in the number of complaints is possible.

HUMANIDADES Y CIENCIAS DE LA CONDUCTA Datos de panel Efectos fijos y efectos aleatorios Satisfacción de los consumidores Quejas del consumidor Panel data models Fixed effects and random effects Consumer complaint

Sistema de visión para detección de fallas de calidad en la identificación de etiquetas en una línea de producción del giro automotriz

Vision system for the detection of quality failures in the identification of labels in an automotive production line

José Rodrigo Hernández Laguna Jorge Adan Romero Guerrero CAROLINA RETA CASTRO (2023, [Artículo])

Este artículo presenta la implementación de un sistema de visión para la detección de fallas en la identificación de etiquetas en una línea de producción de motores eléctricos de confort para vehículos. Anteriormente, la línea de producción dependía completamente de la inspección visual realizada por un operador. La solución propuesta considera tanto los aspectos técnicos del sistema de visión como otros factores clave para asegurar la calidad del proceso, como: las políticas de aseguramiento de calidad de las normas automotrices vigentes en México (IATF 6949:2016 e ISO9000), la mejora continua, la estadística, la ergonomía y la estandarización de procesos. Los resultados demuestran el éxito de la implementación. El sistema demostró ser efectivo al identificar las fallas de manera precisa; se logró una reducción significativa en el número prioritario de riesgo en el análisis y modo de efectos de falla; y se logró una reducción en la estadística de fallas internas y con el cliente, de 2021 a 2022.

Sistema de visión Análisis y modo de efectos de falla Inspección de defectos Industria automotriz Vision system Analysis and failure effects mode Defect inspection Automotive industry INGENIERÍA Y TECNOLOGÍA CIENCIAS TECNOLÓGICAS OTRAS ESPECIALIDADES TECNOLÓGICAS OTRAS OTRAS

Análisis preventivos de variables para la industria cerámica con base en la metodología de análisis a modo y efecto de falla (FMEA method)

Preventive analysis of variables for the ceramic industry based on the failure mode and effect analysis (FMEA method)

Rigel Hugo Carreón Reyes Juan Carlos Neri Guzmán (2023, [Artículo])

El presente estudio indica de una forma tangible la aplicación de la herramienta FMEA (Failure Mode And Effects Analysis -por sus siglas en inglés) en la aplicación de fabricación de cerámica sanitaria, en donde se evalúan las variables que están relacionadas con el proceso de diseño, procesamiento de piezas cerámicas y de su relación existente para poder alcanzar los requisitos normativos y que estos a su vez sean alcanzables. Dentro del estudio se presenta el análisis y elaboración de la matriz riesgos en modo de fallas, así como una serie de definiciones estadísticas con las cuales son evaluados los procesos de fabricación, así como la explicación clara de la metodología FMEA en donde se indica la adecuación de estos conceptos a este tipo de manufacturas (cerámica sanitaria). Este trabajo también describe a través del estudio de caso de las variables una metodología que detalla los conceptos básicos tales como severidad, detección y ocurrencia combinando el desarrollo de tablas parametrizadas y / o acopladas al tipo de proceso de manufactura cerámica .En los resultados que se obtienen se observa la disminución de la incertidumbre hasta de 85% en los valores de RPN y una mejora en el cpk >1,33 como índice de calidad los riesgos o incertidumbres disminuidos son de forma numérica a través de la comprobación de nuevas acciones y el reanálisis de los conceptos de ocurrencia y detección derivados de la implementación de acciones. Las conclusiones indican como una herramienta adecuada el uso de FMEA para el campo de aplicación de la manufactura de cerámica sanitaria.

The present study indicates in a tangible way the application of the FMEA tool (Failure Mode and Effects Analysis) in the application of sanitary ceramic manufacturing, where the variables that are related to the process of design, processing of ceramic pieces and their existing relationship are evaluated in order to achieve the regulatory requirements and that these in turn are achievable. The study presents the analysis and elaboration of the risk matrix in failure mode as well as a series of statistical definitions with which the manufacturing processes are evaluated as well as the clear explanation of the FMEA methodology (failure mode and effects analysis) where the application and adequacy of these concepts to this type of manufactures (sanitary ceramics) is indicated. This paper also describes through the case study of the variables a methodology that details the basic concepts such as severity, detection and occurrence combining the development of parameterized tables and / or coupled to the type of ceramic manufacturing process. In the results obtained, the decrease in uncertainty of until 85% in the values of RPN and an improvement in the cpk >1.33 as a quality index, the risks or uncertainties decreased are numerically through the verification of new actions and the reanalysis of the concepts of occurrence and detection derived from the implementation of actions. The conclusions indicate as an appropriate tool the use of FMEA for the field of application of the manufacture of sanitary ceramics.

AMEF (Análisis de Modo de Efecto y Falla) Productos cerámicos Cerámica sanitaria Procesos cerámicos Severidad Detección Ocurrencia FMEA (Failure Mode and Effects Analysis) Ceramic products Standard ASME Sanitary ceramic Ceramic processess INGENIERÍA Y TECNOLOGÍA CIENCIAS TECNOLÓGICAS OTRAS ESPECIALIDADES TECNOLÓGICAS OTRAS OTRAS

Spatial Effects of Urban Transport on Air Pollution in Metropolitan Municipalities of Mexico

GERZAIN AVILES POLANCO Marco Antonio Almendárez Hernández Luis Felipe Beltrán Morales Alfredo Ortega Rubio (2022, [Artículo])

"The objective of this work was to estimate the local effects and spatial spillover effects of the number of vehicles, use of urban public transport, and population density on nitrogen oxide emissions for 405 metropolitan municipalities in Mexico in 2016. To this end, a Spatial Durbin Model was estimated. We found positive direct effects of the number of vehicles and population density and negative direct effects of the use of urban public transport. The number of vehicles in circulation had negative spillover effects on the nitrogen oxide emissions of neighboring municipalities. These results indicate that the design of public policy programs aimed at reducing air pollution in Mexico should be based on coordination across metropolitan municipalities."

private car transportation, air pollution, nitrogen oxide emissions, spatial spillover effects, metropolitan municipalities CIENCIAS FÍSICO MATEMÁTICAS Y CIENCIAS DE LA TIERRA CIENCIAS DE LA TIERRA Y DEL ESPACIO METEOROLOGÍA CONTAMINACIÓN ATMOSFÉRICA CONTAMINACIÓN ATMOSFÉRICA