The Scaling Scan: Un outil pratique pour déterminer les opportunités et les défis liés à la mise à l’échelle soutenible des innovations

Lennart Woltering (2023, [Libro])

CIENCIAS AGROPECUARIAS Y BIOTECNOLOGÍA INNOVATION ADOPTION SOCIAL INCLUSION ENVIRONMENTAL FACTORS SCALING UP

Modelo híbrido de sistemas energéticos para la evaluación del uso de energías renovables

Carlos Iván Torres González (2020, [Tesis de maestría])

En este trabajo proponemos un modelo híbrido para evaluar diferentes escenarios de generación de electricidad con energías renovables que maximiza el bienestar social desde la perspectiva económica contemplando un enfoque técnico sobre la estructura de costos de producción de electricidad. Adicionalmente, realizamos 2 simulaciones del modelo propuesto al sistema eléctrico de Baja California Sur para 10 períodos, contemplando 4 escenarios de producción limpia diferentes. De los resultados observados en ambas simulaciones podemos remarcar 2 puntos en términos de políticas públicas. El primer punto es la importancia de tener múltiples generadores que funcionen con combustibles renovables si se desea producir una proporción significativa de electricidad con FER. El segundo punto es el trade-off entre bienestar y emisiones de CO2. Los resultados sugieren que el aumento del consumo de electricidad es un elemento importante para aumentar el bienestar social. A su vez, el aumento de consumo eléctrico implica un aumento de producción, y por tanto un aumento de emisiones de CO2. Los resultados de la segunda simulación sugieren que con el aumento de la capacidad de generación limpia y costos eficientes, se pueden alcanzar niveles de bienestar casi iguales a los tradicionales, pero con la mitad de emisiones de CO2.

Electric power production -- Effect of renewable energy sources on -- Mexico -- Baja California Sur (State) -- 2015 -- Mathematical models. Carbon dioxide mitigation -- Effect of renewable energy sources on -- Mexico -- Baja California Sur (State) -- 2015 -- Mathematical models. CIENCIAS SOCIALES CIENCIAS SOCIALES

Escenarios futuros de eventos extremos de precipitación y temperatura en México

Future changes of precipitation and temperature extremes in Mexico

Ernesto Ramos Esteban (2024, [Tesis de maestría])

Diferentes estudios a escala mundial indican un incremento en frecuencia de eventos climáticos extremos debido al calentamiento global y sugieren que podrían intensificarse en el futuro. El objetivo de este trabajo es analizar los posibles cambios de 12 índices climáticos extremos (ICE) de precipitación y temperatura en 15 regiones de México, el sur de los Estados Unidos y Centroamérica para un período histórico (1981-2010), un futuro cercano (2021-2040), un futuro intermedio (2041-2060) y un futuro lejano (2080-2099). Se utilizó el reanálisis ERA5 como referencia en la evaluación histórica de los modelos climáticos globales (MCG) y para las proyecciones se analizaron los ICE de diez MCG del Proyecto de Intercomparación de Modelos Climáticos, fase 6 (CMIP6), de acuerdo con dos escenarios de Vías Socioeconómicas Compartidas (SSPs), uno de bajas emisiones (SSP2-4.5) y otro de altas emisiones (SSP3-7.0). Los MCG reproducen muy bien los índices extremos de temperatura histórica y los días consecutivos secos, pero subestiman la lluvia promedio y la lluvia extrema en las zonas más lluviosas desde el centro de México hasta Centroamérica. Históricamente, se observaron tendencias positivas de las temperaturas extremas (TXx y TNn) en todas las regiones, pero sólo en algunas regiones fueron significativas, mientras que los índices de lluvia extrema (R95p, R10mm y R20mm) presentaron tendencias negativas, pero pequeñas. Las proyecciones indican que las temperaturas extremas podrían seguir incrementándose en el futuro, desde 2° C hasta 5° C a mitad y final de siglo, respectivamente. La contribución de la precipitación extrema arriba del percentil 95 (R95p) se podría incrementar entre un 10 % y 30 %, especialmente en la región subtropical, mientras que la precipitación podría disminuir en las regiones tropicales. Este estudio es el primero que analiza los cambios futuros de índices extremos del CMIP6 a escala regional (en 15 regiones) de México, el sur de Estados Unidos y Centroamérica.

Global-scale studies indicate an increase in the frequency of extreme weather events due to global warming and suggest that they could further intensify in the future. This study aims to assess potential changes in 12 extreme climate indices (ECI) related to precipitation and temperature in 15 regions in Mexico, the southern United States, and Central America for different periods: a historical period (1981-2010), a near future (2021-2040), an intermediate future (2041-2060), and a far future (2080-2099). The ERA5 reanalysis was used as a reference for the historical evaluation of global climate models (GCMs), and ECI from ten GCMs of phase 6 (CMIP6) from the Coupled Model Intercomparison Project were employed for the projections and examined under two Shared Socioeconomic Pathways (SSPs) scenarios, one characterized by low emissions (SSP2-4.5) and another representing high greenhouse gas emissions (SSP3-7.0). The GCMs reproduce historical extreme temperature indices and consecutive dry days very well. However, they underestimate average and extreme rainfall from central Mexico to Central America in the wetter areas. Historically, positive trends in extreme temperatures (TXx and TNn) were observed across all regions. However, statistical significance was only present in certain regions, while extreme rainfall indices (R95p, R10mm, and R20mm) exhibited small negative trends. The projections suggest that extreme temperatures could continue to increase in the future, from 2°C to 5°C by the mid and late century, respectively. The contribution of extreme precipitation above the 95th percentile (R95p) could increase by 10% to 30%, particularly in the subtropical regions, while precipitation might decrease in tropical regions. This study is the first to analyze future changes in extreme indices from CMIP6 at a regional scale (across 15 regions) in Mexico, the southern United States, and Central America.

Centroamérica, CMIP6, escenarios SSP, extremos climáticos, intercomparación de modelos climáticos, México Central America, climate extremes, CMIP6, intercomparison of climate models, Mexico, SSP scenarios CIENCIAS FÍSICO MATEMÁTICAS Y CIENCIAS DE LA TIERRA CIENCIAS DE LA TIERRA Y DEL ESPACIO OCEANOGRAFÍA OCEANOGRAFÍA FÍSICA (VE R 5603 .04) OCEANOGRAFÍA FÍSICA (VE R 5603 .04)

Multimodal deep learning methods enhance genomic prediction of wheat breeding

Carolina Rivera-Amado Francisco Pinto Francisco Javier Pinera-Chavez David González-Diéguez Matthew Paul Reynolds Paulino Pérez-Rodríguez Huihui Li Osval Antonio Montesinos-Lopez Jose Crossa (2023, [Artículo])

Conventional Methods Genomic Prediction Accuracy Deep Learning Novel Methods CIENCIAS AGROPECUARIAS Y BIOTECNOLOGÍA WHEAT BREEDING MACHINE LEARNING METHODS MARKER-ASSISTED SELECTION

On-farm storage loss estimates of maize in Kenya using community survey methods

Hugo De Groote Anani Bruce (2023, [Artículo])

Maize is the most important staple in sub-Saharan Africa (SSA), with highly seasonal production. High storage losses affect food security, but good estimations are lacking. A new method using focus group discussions (FGDs) was tested with 121 communities (1439 farmers, 52% women) in Kenya's six maize-growing zones, to estimate the maize losses to storage pests and analyze farmer practices. As control strategies, half of the farmers used chemical pesticides (49%), while hermetic bags (16%) and botanicals (15%) were also popular. Relative loss from weevils in the long rains was estimated at 23%, in the short rains 18%, and annually 21%. Fewer farmers were affected by the larger grain borer (LGB) than by maize weevils: 42% in the long rainy season and 32% in the short rainy season; losses from LGB were also smaller: 19% in the long season, 17% in the short season, and 18% over the year. Total storage loss, from both species combined, was estimated at 36%, or 671,000 tonnes per year. The greatest losses occur in the humid areas, especially the moist mid-altitudes (56%), and with smaller loss in the drylands (20–23%). Extrapolating the point data and overlaying with the maize production map shows the geographic distribution of the losses, with the most important area found around Lake Victoria. FGDs provide convenient and cheap tools to estimate storage losses in representative communities, but a total loss estimate of 36% is higher than is found in other studies, so its accuracy and framing effects need to be assessed. We conclude that storage pests remain a major problem, especially in western Kenya, and that the use of environmentally friendly technologies such as hermetic storage and botanicals needs more attention, both by the public extension service and private agrodealers.

Larger Grain Borer Maize Weevil CIENCIAS AGROPECUARIAS Y BIOTECNOLOGÍA MAIZE STORAGE LOSSES PESTS SURVEY METHODS

Movements of scalloped hammerhead sharks (Sphyrna lewini) at Cocos Island, Costa Rica and between oceanic islands in the Eastern Tropical Pacific

Elena Nalesso (2019, [Artículo])

Many species of sharks form aggregations around oceanic islands, yet their levels of residency and their site specificity around these islands may vary. In some cases, the waters around oceanic islands have been designated as marine protected areas, yet the conservation value for threatened shark species will depend greatly on how much time they spend within these protected waters. Eighty-four scalloped hammerhead sharks (Sphyrna lewini Griffith & Smith), were tagged with acoustic transmitters at Cocos Island between 2005–2013. The average residence index, expressed as a proportion of days present in our receiver array at the island over the entire monitoring period, was 0.52±0.31, implying that overall the sharks are strongly associated with the island. Residency was significantly greater at Alcyone, a shallow seamount located 3.6 km offshore from the main island, than at the other sites. Timing of presence at the receiver locations was mostly during daytime hours. Although only a single individual from Cocos was detected on a region-wide array, nine hammerheads tagged at Galapagos and Malpelo travelled to Cocos. The hammerheads tagged at Cocos were more resident than those visiting from elsewhere, suggesting that the Galapagos and Malpelo populations may use Cocos as a navigational waypoint or stopover during seasonal migrations to the coastal Central and South America. Our study demonstrates the importance of oceanic islands for this species, and shows that they may form a network of hotspots in the Eastern Tropical Pacific. © 2019 Nalesso et al. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.

article, Cocos Island, human, monitoring, nonhuman, resident, shark, South America, animal, Costa Rica, environmental protection, island (geological), movement (physiology), physiology, season, shark, Animals, Conservation of Natural Resources, Costa CIENCIAS FÍSICO MATEMÁTICAS Y CIENCIAS DE LA TIERRA CIENCIAS DE LA TIERRA Y DEL ESPACIO OCEANOGRAFÍA OCEANOGRAFÍA

Structural analysis evaluationfor rollers of chassis dynoUsing finite element software

Jesús Emmanuel López Rizo ALFREDO CHAVEZ LUNA JAIME GONZALO SANTANA ESQUIVEL (2023, [Artículo])

This paper discusses the design considerations for a chassis dynamometer, focused on the rollers system used for measuring the power and torque of a vehicle in a university-level workshop. The design must prioritize factors such as safety, ease of use, adaptability to diverse types of vehicles, and the inclusion of safety systems to protect students and the vehicle. The work suggests adaptative features for the design, such as an adjustable fastening system and a compact and portable design, to adapt the structure into a university laboratory. The study also describes common methods for measuring engine power and torque using a chassis dynamometer, and the accurate and reliable measurement systems used for this purpose. This concludes with a discussion of the manufacturing methods used for the chassis dynamometer and a static analysis of the maximum effort capacity in each roller using Von Mises and Goodman fatigue theories. Developing a chassis dynamometer, in accordance the current patents available for workshop practices in a university is essential for providing students with comprehensive training.

Chassis dynamometer Conceptual design Finite element software Power and torque measurement Structural analysis INGENIERÍA Y TECNOLOGÍA CIENCIAS TECNOLÓGICAS OTRAS ESPECIALIDADES TECNOLÓGICAS OTRAS OTRAS

Reconocimiento continuo de la Lengua de Señas Mexicana

Continuous recognition of Mexican Sign Language

Ricardo Fernando Morfín Chávez (2023, [Tesis de maestría])

La Lengua de Señas Mexicana (LSM) es la lengua utilizada por la comunidad Sorda en México, y, a menudo, subestimada y pasada por alto por la comunidad oyente, lo que resulta en la exclusión sistemática de las personas Sordas en diversos aspectos de la vida. Sin embargo, la tecnología puede desempeñar un papel fundamental en acercar a la comunidad Sorda con la comunidad oyente, promoviendo una mayor inclusión y comprensión entre ambas. El objetivo principal de este trabajo es diseñar, implementar y evaluar un sistema de reconocimiento continuo de señas estáticas en LSM mediante, visión por computadora y técnicas de aprendizaje máquina. Se establecieron objetivos específicos, que incluyen la generación de un conjunto de datos de señas estáticas, pertenecientes al alfabeto manual de la LSM, el diseño de un modelo de reconocimiento, y la evaluación del sistema, tanto en la modalidad aislada como en la continua. La metodología involucra dos evaluaciones distintas. La primera se enfoca en el reconocimiento de señas estáticas en el dominio aislado, para ello se capturaron datos de 20 participantes realizando movimientos de la mano en múltiples ángulos. Se evaluaron diversas técnicas de aprendizaje automático, destacando que el enfoque basado en Máquinas de Soporte Vectorial (SVM) obtuvo los mejores resultados (F1-Score promedio del 0.91). La segunda evaluación se concentra en el reconocimiento continuo de señas estáticas, con datos recopilados de seis participantes con diferentes niveles de competencia en LSM, logrando un rendimiento sólido con errores cercanos al 7 %. Además, se evaluó la viabilidad del sistema en aplicaciones de tiempo real, demostrando un excelente desempeño (velocidad promedio de procesamiento de 45 cuadros por segundo). A pesar de los logros alcanzados, es importante reconocer que este proyecto se centró en el reconocimiento continuo de señas estáticas en LSM. Queda pendiente, como un desafío interesante, la exploración del reconocimiento continuo de señas dinámicas en LSM para futuras investigaciones. Se considera esencial explorar enfoques orientados a la escalabilidad y aplicaciones en tiempo real en investigaciones posteriores.

This study focuses on the continuous recognition of static signs in Mexican Sign Language (Lengua de Señas Mexicana (LSM)), the language used by the Deaf community in Mexico. Despite its significance, LSM is often underestimated and overlooked, leading to the systematic exclusion of Deaf individuals in various aspects of life. The primary objective of this work is to design, implement, and evaluate a continuous static sign recognition system in LSM using computer vision and machine learning techniques. Specific goals were established, including the creation of a dataset of static signs belonging to the manual alphabet of LSM, the design of a recognition model, and the evaluation of the system in both isolated and continuous modes. The methodology involves two distinct evaluations. The first one focuses on the recognition of static signs in the isolated domain, for which data from 20 participants performing hand movements at various angles were collected. Various machine learning techniques were evaluated, with the Máquinas de Soporte Vectorial (SVM)-based approach achieving the best results (average F1-Score of 0.91). The second evaluation centers on the continuous recognition of static signs, using data collected from six participants with varying levels of competence in LSM, achieving robust performance with errors close to 7 %. Furthermore, the feasibility of the system in real-time applications was assessed, demonstrating excellent performance (average processing speed of 45 frames per second). Despite the achievements, it is important to recognize that this project focused on continuous recognition of static signs in LSM. It remains an interesting challenge to explore the continuous recognition of dynamic signs in LSM for future research. It is considered essential to explore scalability-oriented approaches and real-time applications in subsequent investigations.

Lengua de Señas Mexicana (LSM), visión por computadora, aprendizaje automático, alfabeto manual de la LSM, reconocimiento automático de señas estáticas, reconocimiento aislado de señas, reconocimiento continuo de señas, aplicacion Mexican Sign Language (LSM), computer vision, machine learning, LSM manual alpahbet, automatic recognition of static signs, isolated sign recognition, continuous sign recognition, real-time aplications INGENIERÍA Y TECNOLOGÍA CIENCIAS TECNOLÓGICAS TECNOLOGÍA DE LOS ORDENADORES ENSEÑANZA CON AYUDA DE ORDENADOR ENSEÑANZA CON AYUDA DE ORDENADOR

Universal fixation system for pad printing of plastic parts

JOSE ALEJANDRO FERNANDEZ RAMIREZ (2023, [Artículo])

Pad printing is used in automotive, medical, electrical and other industries, employing diverse materials to transfer a 2D image onto a 3D object with different sizes and geometries. This work presents a universal fixation system for pad printing of plastic parts (UFSP4) in response to the needs of small companies that cannot afford to invest in the latest technological advances. The UFSP4 comprises two main subsystems: a mechanical support system (i.e., support structure, jig matrix and braking system) and a control system (i.e., an electronic system and an electric-hydraulic system). A relevant feature is the combination of a jig matrix and jig pins to fixate complex workpieces with different sizes. Using finite element analysis (FEA), in the mesh convergence, the total displacement converges to 0.00028781 m after 12,000 elements. The maximum equivalent stress value is 1.22 MPa for the polycarbonate plate in compliance with the safety factor. In a functionality test of the prototype performed in a production environment for one hour, the jigs fixed by the plate did not loosen, maintaining the satisfactory operation of the device. This is consistent with the displacement distribution of the creep analysis and shows the absence of the creep phenomenon. Based on FEA that underpinned the structural health computation of the braking system, the prototype was designed and built, seeking to ensure a reliable and safe device to fixate plastic parts, showing portability, low-cost maintenance and adaptability to the requirements of pad printing of automotive plastic parts.

Use of AI tools declaration: The authors declare they have not used Artificial Intelligence (AI) tools in the creation of this article.

Acknowledgments: To the company Plásticos Decorados and Centro de Tecnología Avanzada (CIATEQ A.C.) for the facilities and support to carry out this work. To the Consejo Nacional de Humanidades, Ciencias y Tecnologías (CONAHCYT) for a Ph.D. scholarship support number 500839 and CONAHCYT SNI.

Conflict of interest: The authors declare there are no conflicts of interest.

Modular fixtures Jig matrix Prototype design Pad printing Fixture methods INGENIERÍA Y TECNOLOGÍA CIENCIAS TECNOLÓGICAS OTRAS ESPECIALIDADES TECNOLÓGICAS OTRAS OTRAS

A 'wiring diagram' for sink strength traits impacting wheat yield potential

Gustavo Slafer John Foulkes Matthew Paul Reynolds Erik Murchie A Elizabete Carmo-Silva Simon Griffiths (2023, [Artículo])

Grain Number Grain Weight Yield Physiology CIENCIAS AGROPECUARIAS Y BIOTECNOLOGÍA BREEDING GRAIN HARVEST INDEX SOURCE SINK RELATIONS YIELD COMPONENTS WHEAT