Comparación de parámetros meteorológicos dentro y fuera de un invernadero para el cálculo de los requerimientos hídricos de un cultivo bajo condiciones de invernadero en Ocuituco, Morelos

Helene Emmi Karin Unland Weiss JUAN MANUEL ANGELES HERNANDEZ (2011, [Ítem publicado en memoria de congreso])

En la República Mexicana, la agricultura de riego actualmente consume el 78% del agua total utilizada, mientras que, la demanda de agua por otros usos (doméstico, servicios, industrial y recreación) está en aumento continuo, lo que ha causado una tendencia a reducir el porcentaje de agua disponible para la agricultura, aunando que la demanda de alimentos por la población es cada vez mayor. Para ofrecer una solución a esta problemática de la agricultura de riego, se busca incrementar la productividad del agua. La agricultura protegida bajo condiciones de invernadero representa una excelente alternativa para reducir los volúmenes de agua aplicados a los cultivos y al mismo tiempo, elevar la producción, lo cual se refleja en el incremento de la superficie con invernaderos en los últimos años y en el incremento de la tecnificación de riego incluyendo el uso de sistemas de riego de alta eficiencia. Un aspecto emergente del proceso de tecnificación es la instrumentación de los invernaderos con sensores agrometeorológicos para determinar los requerimientos hídricos reales de los cultivos bajo condiciones de invernadero, ya que hay diferencias importantes entre las condiciones ambientales dentro y fuera del invernadero. Como parte de este estudio, se instrumentó un invernadero en la población de Ocuituco, estado de Morelos, para llevar a cabo la producción de un cultivo de jitomate indeterminado, desarrollado bajo condiciones de ambiente protegido. Los datos de los sensores adentro y afuera del invernadero se utilizaron para estimar la evapotranspiración de referencia (ETo).

Cultivos alimenticios Parámetros meteorológicos Invernaderos INGENIERÍA Y TECNOLOGÍA

Determinación en laboratorio de los parámetros reológicos de mezclas agua-sedimentos para el cálculo de flujos de lodos y debris

ISAAC BONOLA ALONSO (2002, [Artículo])

Con el fin de predecir y tomar medidas de prevención, se presentan los modelos numéricos desarrollados para conocer parámetros reológicos de las mezclas de agua-sedimentos.

Flujo de lodos Parámetros reológicos Simulación INGENIERÍA Y TECNOLOGÍA

Ajustar las condiciones de operación de una prensa hidráulica horizontal de fabricación propia para un proceso de doblado en frío a 90°

Hugo Estrada Pimentel HUGO ARCOS GUTIERREZ JOSE ANTONIO BETANCOURT CANTERA Jan Mayén Chaires John Edison García Herrera (2023, [Artículo])

During the cold-bending process, the tooling suffers considerable damage due to excess pressure. This also causes the machines to break down, causing problems in the precision and quality of the metal parts formed. The precision depends on the operating conditions of the press, the tooling employed, and the elastic recovery effect of the material. This study determines the working conditions for a made-in-house horizontal hydraulic press through an experimental design (DOE). This research carried out the V-forming to 90° (ISO 2768-1) of a hot-rolled carbon steel plate, considering pressure, piston permanence time, and recovery factor (Kr). The experimental and statistical analysis ensures accurate forming while the work pressure decreases by 17% and 33%, respectively, regarding the maximum. This reduction will delay the appearance of fatigue damage and have the operating parameters well established; in turn, it will be possible to design tools according to commercial standards.

Durante el proceso de conformado en frío, las herramientas sufren daños considerables debido al exceso de presión. Esto también causa que las máquinas se rompan, causando problemas en la precisión y calidad de las piezas metálicas formadas. La precisión depende de las condiciones de funcionamiento de la prensa, las herramientas empleadas y el efecto elástico de recuperación del material. Este estudio determina las condiciones de trabajo de una prensa hidráulica horizontal fabricado en casa a través de un diseño experimental (DOE). Esta investigación llevó a cabo el conformado en V a 90° (ISO 2768-1) de una placa de acero al carbono laminada en caliente, teniendo en cuenta la presión, el tiempo de permanencia del pistón y el factor de recuperación (Kr). El análisis experimental y estadístico asegura un conformado preciso, mientras que la presión de trabajo disminuyó en un 17% y 33%, respectivamente, con respecto al máximo. Esta reducción retrasará la aparición de daños por fatiga y tendrá los parámetros de funcionamiento bien establecidos; con estos, a su vez, será posible diseñar herramientas de acuerdo con los estándares comerciales.

Authorship acknowledgement: Hugo Estrada: Conceptualization; methodology; validation; writing; revision; project administration; software; investigation; display; draft writing; reviewing and editing. Hugo Arcos: Conceptualization; methodology; validation; writing; revision; simulation; software; reviewing. José A. Betancourt: Supervision; methodology; validation; writing; revision; draft writing: writing reviewing and editing. Jan Mayen: Supervision; methodology; validation; writing; revision; formal analysis.

John E. García: Conceptualization; supervision; methodology; validation; writing; revision; project management; formal analysis, draft writing: writing reviewing and editing.

Cold forming DOE ANOVA Recovery factor (Kr) Factorial analysis 2k Spring back (SB) Conformado en frío Factor de recuperación (Kr) Análisis factorial 2k Recuperación elástica (SB) INGENIERÍA Y TECNOLOGÍA CIENCIAS TECNOLÓGICAS OTRAS ESPECIALIDADES TECNOLÓGICAS OTRAS OTRAS

A Novel Technique for Classifying Bird Damage to Rapeseed Plants Based on a Deep Learning Algorithm.

Ali Mirzazadeh Afshin Azizi Yousef Abbaspour_Gilandeh José Luis Hernández-Hernández Mario Hernández Hernández Iván Gallardo Bernal (2021, [Artículo])

Estimation of crop damage plays a vital role in the management of fields in the agricultura sector. An accurate measure of it provides key guidance to support agricultural decision-making systems. The objective of the study was to propose a novel technique for classifying damaged crops based on a state-of-the-art deep learning algorithm. To this end, a dataset of rapeseed field images was gathered from the field after birds¿ attacks. The dataset consisted of three classes including undamaged, partially damaged, and fully damaged crops. Vgg16 and Res-Net50 as pre-trained deep convolutional neural networks were used to classify these classes. The overall classification accuracy reached 93.7% and 98.2% for the Vgg16 and the ResNet50 algorithms, respectively. The results indicated that a deep neural network has a high ability in distinguishing and categorizing different image-based datasets of rapeseed. The findings also revealed a great potential of Deep learning-based models to classify other damaged crops.

rapeseed classification damaged crops deep neural networks INGENIERÍA Y TECNOLOGÍA CIENCIAS TECNOLÓGICAS TECNOLOGÍA DE LOS ALIMENTOS

Classification of Cucumber Leaves Based on Nitrogen Content Using the Hyperspectral Imaging Technique and Majority Voting.

Sajad Sabzi Razieh Pourdarbani Mohammad Hossein Rohban Alejandro Fuentes_Penna José Luis Hernández-Hernández Mario Hernández Hernández (2021, [Artículo])

Improper usage of nitrogen in cucumber cultivation causes nitrate accumulation in the fruit and results in food poisoning in humans; therefore, mandatory evaluation of food products becomes inevitable. Hyperspectral imaging has a very good ability to evaluate the quality of fruits and vegetables in a non-destructive manner. The goal of the present paper was to identify excess nitrogen in cucumber plants. To obtain a reliable result, the majority voting method was used, which takes into account the unanimity of five classifiers, namely, the hybrid artificial neural network¿imperialism competitive algorithm (ANN-ICA), the hybrid artificial neural network¿harmonic search (ANN-HS) algorithm, linear discrimination analysis (LDA), the radial basis function network (RBF), and the Knearest- neighborhood (KNN). The wavelengths of 723, 781, and 901 nm were determined as optimal wavelengths using the hybrid artificial neural network¿biogeography-based optimization (ANNBBO) algorithm, and the performance of classifiers was investigated using the optimal spectrum. The results of a t-test showed that there was no significant difference in the precision of the algorithm when using the optimal wavelengths and wavelengths of the whole range. The correct classification rate of the classifiers ANN-ICA, ANN-HS, LDA, RBF, and KNN were 96.14%, 96.11%, 95.73%, 64.03%, and 95.24%, respectively. The correct classification rate of majority voting (MV) was 95.55% for test data in 200 iterations, which indicates the system was successful in distinguishing nitrogen-rich leaves from leaves with a standard content of nitrogen.

artificial neural network cucumber hyperspectral imaging majority voting nitrogen INGENIERÍA Y TECNOLOGÍA CIENCIAS TECNOLÓGICAS TECNOLOGÍA DE LOS ALIMENTOS

Development and demographic parameters of Fall Armyworm (Spodoptera frugiperda J.E. Smith) when feeding on rice (Oryza sativa)

Timothy Joseph Krupnik (2023, [Artículo])

Fall Armyworm (FAW), Spodoptera frugiperda (Lepidoptera: Noctuidae), native to the Americas, is a polyphagous insect pest feeding on more than 350 plant species. We studied the developmental and demographic parameters of the maize (Zea mays) strain of FAW on rice (Oryza sativa), and compared the results with its prime host, maize. The developmental period from egg to adult among rice varieties did not differ significantly; however, it did differ significantly between rice and maize, as feeding on rice rather than maize extends development duration of FAW larvae by 15.15%. FAW larvae collected and reared on maize were found to be of significantly higher weight than those reared on rice at two sequential dates of their development; pupal weight however was observed as statistically similar between these two host crops. Regardless of the host, female adults always emerged before males; in maize, female FAW appeared 3.36 days earlier than males. Females derived from rice had longer pre-oviposition periods and shorter oviposition ones than those derived from maize. In rice and maize, the age-specific fecundity rate (mx) peaked at 40 days and 33 days, respectively. When the Fall Armyworm consumed maize instead of rice, there was an increase in the reproduction rate (R 0), the intrinsic rate of natural increase (rm), and the finite rate of increase (λ). For instance, when FAW fed on rice, the rm value was 0.121, whereas it rose to 0.173 when FAW fed on maize. Feeding on rice instead of maize resulted in significantly longer mean length of generation (tG) and doubling time (tD) for the fall armyworm (FAW). This suggests that it took a longer time for the FAW population to double when it was fed rice under controlled greenhouse conditions. In summary, our research suggests that FAW can survive and complete its life cycle on rice plants and on multiple varieties of rice in Bangladesh. However, field verification is necessary before drawing strong conclusions as to the risk posed by FAW in rice. This requires additional studies of FAW and associated insect community dynamics under non-controlled conditions and in the context of multi-species interactions in Asian rice fields.

Invasive Pest Life Table Parameters CIENCIAS AGROPECUARIAS Y BIOTECNOLOGÍA HOST PLANTS PESTS RICE SPODOPTERA FRUGIPERDA FALL ARMYWORMS

Microbiological Analysis of the Air in a Popular Fish Processing and Marketing Area

Angélica Sinaí Quintanilla Martínez Lizet Aguirre Güitrón Luis Daniel Espinosa Chaurand MAYRA DIAZ RAMIREZ ALEJANDRO DE JESUS CORTES SANCHEZ (2022, [Artículo])

"Fish are marketed as a food and consumed worldwide. During the production of food, contamination by microorganisms is possible through the air, soil, water, surfaces, food handlers, etc. The air does not have a natural microbial composition, but it is a vehicle for the transmission of microorganisms of economic and health interest because they are associated with food spoilage and human diseases. The objective of this study was the microbiological analysis of the air in an area popular for the processing and marketing of fish products in the city of Tepic Nayarit. Using the passive or sedimentation method to collect microorganisms present in the air, the proportion of aerobic mesophile bacteria, coliform bacteria, fungi and yeast was determined at different locations in the fish processing and marketing area for four weeks. The results indicated that the aerobic mesophiles had the highest counts among all the microbial groups analyzed at the twelve different sampling points during the four weeks of the study; their numbers ranged from 2.44 to 2.95 log CFU/m3/h, followed by molds with counts from 1.44 to 2.75 log CFU/m3/h, yeasts with counts from 0.7 to 2.01 log CFU/m3/h and coliforms with counts that ranged from 0.7 to 1.68 log CFU/m3/h. We determined the proportion of the viable microbiological population present in the air at the different sampling points of the study area; several of these sampling points presented values above those recommended by various agencies around the world. Knowledge of the biological hazards transported through the air is important to establish and reduce the risk to the health of occupants and the contamination pathways of processed and marketed fishery products that may be associated with spoilage and foodborne diseases."

food safety, food quality, air pollution, airborne biohazard, environmental monitoring INGENIERÍA Y TECNOLOGÍA CIENCIAS TECNOLÓGICAS TECNOLOGÍA DE LOS ALIMENTOS HIGIENE DE LOS ALIMENTOS HIGIENE DE LOS ALIMENTOS

COVID-19 and family participation in school activities.: Teaching experiences around the Learn at Home program

Evangelina Cervantes Holguín Pavel Roel Gutiérrez Sandoval (2022, [Artículo, Artículo])

The article analyzes, from the qualitative method, the participation of families and teaching staff of the first cycle of primary education in the state of Chihuahua (Mexico) to carry out the various activities of the Learn at Home program implemented in March 2020 as a response to the resulting health confinement by COVID-19. It is concluded that the participation of families in school emergency situations implies improving the relationship between teachers, families, and the community in the implementation processes of educational programs with greater support to organize study times, take advantage of the different cultural capitals and promote family co-responsibility.

Aprendizaje Educación a distancia Enseñanza primaria Epidemia Familia COVID-19 Chihuahua HUMANIDADES Y CIENCIAS DE LA CONDUCTA HUMANIDADES Y CIENCIAS DE LA CONDUCTA Family Elementary education Epidemics Distance education Learning

Worldwide selection footprints for drought and heat in bread wheat (Triticum aestivum L.)

Ana Luisa Gómez Espejo Carolina Sansaloni Juan Burgueño Fernando Henrique Toledo Adalberto Benavides-Mendoza M. Humberto Reyes-Valdés (2022, [Artículo])

Genome–Environment Associations Climatic Variables Hormonal Elicitors CIENCIAS AGROPECUARIAS Y BIOTECNOLOGÍA ADAPTATION DROUGHT STRESS HEAT STRESS LANDRACES TRITICUM AESTIVUM

ENTRE HUELLAS Y CLIMA : TRANSFORMACIÓN AMBIENTAL EN LOS PUEBLOS DE INDIOS DE LA MIXTECA 1545-1720

Mario Alberto Roa López (2023, [Tesis de doctorado])

“La presente tesis pretende abordar los procesos de transformación ambiental en la región Mixteca en buena parte del periodo colonial. A partir del estudio de las características del espacio de estudio propongo la existencia de una zona denominada la región Mixteca Ganadera, este territorio se configuró a partir de la introducción, desarrollo y consolidación de la ganadería menor. En particular, la investigación trata de demostrar que la región Mixteca estaba integrada a una red de pueblos de indios que se ubican principalmente entre las jurisdicciones de la Mixteca Alta y Baja. La hipótesis sustenta que tanto la actividad pecuaria como las oscilaciones climáticas fueron factores que generaron procesos de reintegración en los aspectos políticos, socioeconómicos, geográficos y ambientales. Por un lado, la ganadería menor trashumante era el motor de las dinámicas cotidianas. En este sentido, se desarrolló una economía de arrastre fincada en las diversas actividades ganaderas, este sistema económico vinculaba a los pueblos y los centros urbanos novohispanos. Cabe resaltar que desde los primeros años posteriores a la conquista de los pueblos de la región Mixteca concretaron acuerdos y alianzas con los españoles. De tal modo, algunos pueblos de la Mixteca evitaron conflictos a travás de las armas. Estos pactos incentivaron el establecimiento de lucrativos negocios que beneficiaron a españoles, caciques y pueblos de indios. En este sentido, el comercio de la seda, de la grana cochinilla y la ganadería menor generaron abundantes recursos para los habitantes de la zona. Esta riqueza se convalida a partir de la lectura de testamentos de caciques y españoles, desde luego, de los ejemplos de arquitectura monástica que consolidó la orden de los dominicos, no menos importante, la fabricación de retablos en los diversos pueblos de indios dispersos en el territorio”.

Política ambiental - México - Oaxaca. Ordenamiento y apropiación de territorio - Mixteca Oaxaqueña. Cambio social - Aspectos ambientales. Ganado - Aspectos económicos - Mixteca Oaxaqueña. Tesis - Doctorado en Historia, Peninsular. CIENCIAS SOCIALES HISTORIA HISTORIA DE PAÍSES HISTORIA LOCAL HISTORIA LOCAL