Multifunctional properties of carbon nanotube yarns and their use for damage sensing in fiber reinforced polymer composites

CESAR ANTONIO PEREZ ARANDA (2024, [Tesis de doctorado])

INGENIERÍA Y TECNOLOGÍA CIENCIAS TECNOLÓGICAS TECNOLOGÍA DE MATERIALES PROPIEDADES DE LOS MATERIALES PROPIEDADES DE LOS MATERIALES

Classification of Cucumber Leaves Based on Nitrogen Content Using the Hyperspectral Imaging Technique and Majority Voting.

Sajad Sabzi Razieh Pourdarbani Mohammad Hossein Rohban Alejandro Fuentes_Penna José Luis Hernández-Hernández Mario Hernández Hernández (2021, [Artículo])

Improper usage of nitrogen in cucumber cultivation causes nitrate accumulation in the fruit and results in food poisoning in humans; therefore, mandatory evaluation of food products becomes inevitable. Hyperspectral imaging has a very good ability to evaluate the quality of fruits and vegetables in a non-destructive manner. The goal of the present paper was to identify excess nitrogen in cucumber plants. To obtain a reliable result, the majority voting method was used, which takes into account the unanimity of five classifiers, namely, the hybrid artificial neural network¿imperialism competitive algorithm (ANN-ICA), the hybrid artificial neural network¿harmonic search (ANN-HS) algorithm, linear discrimination analysis (LDA), the radial basis function network (RBF), and the Knearest- neighborhood (KNN). The wavelengths of 723, 781, and 901 nm were determined as optimal wavelengths using the hybrid artificial neural network¿biogeography-based optimization (ANNBBO) algorithm, and the performance of classifiers was investigated using the optimal spectrum. The results of a t-test showed that there was no significant difference in the precision of the algorithm when using the optimal wavelengths and wavelengths of the whole range. The correct classification rate of the classifiers ANN-ICA, ANN-HS, LDA, RBF, and KNN were 96.14%, 96.11%, 95.73%, 64.03%, and 95.24%, respectively. The correct classification rate of majority voting (MV) was 95.55% for test data in 200 iterations, which indicates the system was successful in distinguishing nitrogen-rich leaves from leaves with a standard content of nitrogen.

artificial neural network cucumber hyperspectral imaging majority voting nitrogen INGENIERÍA Y TECNOLOGÍA CIENCIAS TECNOLÓGICAS TECNOLOGÍA DE LOS ALIMENTOS

Desarrollo de interfaces de electrodos para la detección electroquímica de Bisfenol A: Estudio teórico

JAZMIN DELGADO AVILEZ (2023, [Tesis de maestría])

El bisfenol A (BPA), es un contaminante de origen industrial presente en efluentes y

aguas naturales, que representa un alto riesgo para el entorno ambiental y para la salud humana debido a su inherente toxicidad y su limitada capacidad de degradación. En este contexto, los sensores electroquímicos, generalmente basados en electrodos de carbono, son herramientas fundamentales con el propósito de detectar y cuantificar esta molécula. Sin embargo, estos dispositivos enfrentan desafíos sustanciales derivados de la inactivación electroquímica, un fenómeno atribuido a la formación de una capa aislante o polimerización durante el proceso de detección. La descripción de los mecanismos de reacción BPA/superficie del electrodo puede ser útil para identificar los sitios activos y contribuir a la elucidación del proceso de polimerización.

En esta investigación, se implementó un estudio teórico mediante Teoría de Funcionales de la Densidad (DFT) con el propósito de analizar con profundidad las interacciones entre el BPA en sus diversos estados de oxidación: oxidada (O), reducida (R) y monoprotonada (r*) y materiales de carbono. A tal efecto, se empleó el grafeno funcionalizado (plano basal, borde tipo silla y zigzag) como modelo representativo de la superficie del electrodo. Finalmente se evalúan las posibilidades de la dimerización del BPA o polimerización sobre varios grupos funcionales. El objetivo principal radica en la detección de grupos funcionales específicos que puedan inducir procesos secundarios, los cuales actúan como obstáculos para la eficaz detección electroquímica del BPA. La información resultante se instituye como un recurso valioso con miras al diseño y la optimización de sensores electroquímicos con un desempeño más robusto y sofisticado.

A continuación, se detalla la sinopsis general de este trabajo describiendo cada capítulo y las etapas involucradas en el estudio del modelo teórico de DFT para el sistema de reacción BPA/superficie del electrodo.

Capítulo 1. Estado del arte tanto de los usos industriales como las implicaciones

ambientales asociadas al Bisfenol A. Una de las problemáticas que se destacan es la necesidad de una detección precisa de esta molécula mediante sensores electroquímicos cuya limitación es la inactivación que presentan. También se describe la justificación del trabajo, así como el uso del modelo computacional, además de los objetivos y la hipótesis del mismo.

Capítulo 2. Descripción de los fundamentos teóricos basados en primeros principios, de la Teoría de Funcionales de la Densidad (DFT), con un enfoque especial en las aproximaciones para desarrollar modelos representativos que optimicen el tiempo de cálculo. Además, se detallan las características de la estructura y la superficie de los materiales de carbono considerados en el proceso de modelado.

Capítulo 3. Detalle del proceso de construcción del modelo de superficie para el estudio de las interacciones BPA/superficie del electrodo, donde se empleó el modelo del plano basal,así como los bordes tipo silla y zigzag del grafeno, con funcionalizaciones que incluyen COOH, OH, éter, epóxido, cetona y terminaciones de hidrógeno.

Bisphenol A (BPA) is a contaminant of industrial origin present in effluents and natural waters. It represents a high environmental and human health risk due to its inherent toxicity and limited degradation capacity. In this context, electrochemical sensors, generally based on carbon electrodes, are fundamental to detecting and quantifying this molecule. However, these devices face substantial challenges from electrochemical inactivation, a phenomenon attributed to forming an insulating layer or polymerization during the sensing process. The description of the BPA/electrode surface reaction mechanisms can be helpful to identify the active sites and contribute to the elucidation of the polymerization process.

In this research, a theoretical study was implemented using Density Functional Theory (DFT) to analyze in depth the interactions between BPA in its various oxidation states: oxidized (O), reduced (R), and monoprotonated (r*) and carbon materials. For this purpose, functionalized graphene (basal plane, saddle edge, and zigzag) was used as a representative model of the electrode surface. Finally, the possibilities of BPA dimerization or polymerization on various functional groups are evaluated. The main objective is detecting specific functional groups that can induce secondary processes, which act as obstacles to the effective electrochemical detection of BPA. The resulting information is a valuable resource for designing and optimizing electrochemical sensors with more robust and sophisticated performance.

The general synopsis of this work is detailed below, describing each chapter and the

stages involved in the study of the theoretical DFT model for the BPA/electrode surface reaction system.

Chapter 1. State of the art of industrial uses and the environmental implications associated with Bisphenol A. One of the problems that stands out is the need for precise detection of this molecule using electrochemical sensors, whose limitation is the inactivation they present. The justification of the work is also described, as well as the use of the computational model, in addition to its objectives and hypothesis.

Chapter 2. Description of the theoretical foundations based on first principles of Density Functional Theory (DFT), focusing on approaches to develop representative models that optimize calculation time. Additionally, the structure and surface characteristics of the carbon materials considered in the modeling process are detailed.

Chapter 3. Detail of the construction process of the surface model for the study of BPA/electrode surface interactions, where the basal plane model was used, as well as the chair- type and zigzag edges of graphene, with functionalizations that include COOH, OH, ether, epoxide, ketone, and hydrogen endings.

INGENIERÍA Y TECNOLOGÍA CIENCIAS TECNOLÓGICAS Oxidación de fenoles, Teoría de funcionales de la densidad (DFT), electrodos de carbono, desactivación electroquímica, Bisfenol A (BPA). Phenol oxidation, Density Functional Theory (DFT), carbon electrodes, electrochemical deactivation, Bisphenol A (BPA).

Interfaces hápticas para identificar marcadores digitales del Trastorno del Espectro Autista

Haptic interfaces to identify digital markers of Autism Spectrum Disorder

GLORIA IVONNE MONARCA PINTLE (2023, [Tesis de doctorado])

El uso de herramientas de cribado durante la infancia es de suma importancia para identificar a niños que pueden Trastorno del Espectro Autista (TEA); sin embargo, las pruebas que existen en la actualidad se basan en cuestionarios y observaciones contestadas por los padres por lo que el resultado puede ser subjetivo. Además, la mayoría de las pruebas de cribado se enfocan en el área social y de comunicación, dejando a un lado las características sensoriales, un área donde los padres notan las primeras señales de un desarrollo atípico. En los últimos años, ha crecido el interés por identificar marcadores digitales del TEA que puedan apoyar el cribado de dicho trastorno, usando tecnología que pueda ser usada en cualquier lugar y momento para agilizar el proceso de cribado. Hasta el momento, la investigación en torno a marcadores digitales del TEA relacionados con el procesamiento táctil, ha sido poco explorada debido a que la investigación se ha centrado en explorar otros comportamientos, como la atención visual, movimientos motores, y voz. El crecimiento de las interfaces hápticas abre la posibilidad de explorar el procesamiento táctil e identificar marcadores digitales del TEA. En esta tesis exploramos si las interfaces hápticas pueden ser usadas para promover y recolectar interacciones táctiles que revelen marcadores digitales del TEA. Para tener un mejor entendimiento de las interfaces hápticas, en este trabajo de tesis exploramos dos interfaces hápticas. Una interfaz háptica pasiva llamada BendableSound, la cual cuenta con una retroalimentación por textura y espacio; y una interfaz háptica activa llamada Feel and Touch, la cual es un juego móvil que utiliza patrones vibrotactiles para retroalimentar las interacciones de los niños. Los resultados muestran que las interfaces hápticas tienen la capacidad recolectar interacciones táctiles y revelar marcadores digitales que pueden estar asociados al TEA. En el caso pasivo, participaron 37 niños neurotípicos (NT) y 22 niños con TEA quienes interactuar con BendableSound; los resultados muestran que existen diferencias entre los niños NT y TEA en cuanto al ancho de las interacciones táctiles, la fuerza que aplican y el tiempo que utilizan para realizar interacciones táctiles. En el caso activo, participaron 36 niños NT y 19 niños con TEA quienes interactuaron con Feel and Touch; los resultados muestran que existen diferencias entre los niños NT y TEA en cuanto a la ...

The use of screening tools during infancy is crucial to identify children who are likely to have Autism Spectrum Disorder (ASD); however, the current screening tests are based on questionnaires and observations that parents answer bases on their observations; however, the results might be subjective. In addition, most screening tests focus on the assessment of social and communication skills, disregard sensory skills, an area where parents often notice the first signals of ASD. In recent years, there has been growing interest in identifying digital markers of ASD that can support screening, particularly those that that can be used at any time and any place to speed up the screening process. So far, research on digital markers of ASD related to tactile processing has been little explored due to the lack of tools to assess it. The growth of haptic interfaces opens the possibility to explore tactile processing and identify digital markers of ASD. In this thesis, we propose to investigate the use of haptic interfaces to promote and collect tactile interactions that can reveal digital markers of ASD. To have a better understanding of haptic interfaces, in this thesis work we explore two types of haptic interface. A passive haptic interface called BendableSound, which features texture and spatial feedback; and an active haptic interface called Feel and Touch, which is a mobile game that uses vibrotactile patterns to provide feedback on children’s interactions. The results show that haptic interfaces have the potential to collect touch interactions and reveal digital markers that may be associated with ASD. In the first case, 37 neurotypical (NT) children and 22 children with ASD participated and interacted with BendableSound; the results show that there are differences between NT and ASD children in the width of tactile interactions, the force they apply, and the time they use to perform tactile interactions. In the second case, 36 NT children and 19 children with ASD participated and interacted with Feel and Touch; the results show that there are differences between NT and ASD children in terms of the tilt they produce on the mobile when performing tactile interactions, the total acceleration they produce, and the closeness to the center of the screen of their tactile interactions. The results of this thesis indicate that haptic interfaces have the ability to gather touch interactions and uncover digital markers associated with ASD. The findings of this ...

autismo, cribado, marcadores digitales, interfaces hápticas, aprendizaje automático autism, screnning, digital markers, haptic interfaces, machine learning INGENIERÍA Y TECNOLOGÍA CIENCIAS TECNOLÓGICAS TECNOLOGÍA DE LOS ORDENADORES ORDENADORES DIGITALES ORDENADORES DIGITALES

Microbiological Analysis of the Air in a Popular Fish Processing and Marketing Area

Angélica Sinaí Quintanilla Martínez Lizet Aguirre Güitrón Luis Daniel Espinosa Chaurand MAYRA DIAZ RAMIREZ ALEJANDRO DE JESUS CORTES SANCHEZ (2022, [Artículo])

"Fish are marketed as a food and consumed worldwide. During the production of food, contamination by microorganisms is possible through the air, soil, water, surfaces, food handlers, etc. The air does not have a natural microbial composition, but it is a vehicle for the transmission of microorganisms of economic and health interest because they are associated with food spoilage and human diseases. The objective of this study was the microbiological analysis of the air in an area popular for the processing and marketing of fish products in the city of Tepic Nayarit. Using the passive or sedimentation method to collect microorganisms present in the air, the proportion of aerobic mesophile bacteria, coliform bacteria, fungi and yeast was determined at different locations in the fish processing and marketing area for four weeks. The results indicated that the aerobic mesophiles had the highest counts among all the microbial groups analyzed at the twelve different sampling points during the four weeks of the study; their numbers ranged from 2.44 to 2.95 log CFU/m3/h, followed by molds with counts from 1.44 to 2.75 log CFU/m3/h, yeasts with counts from 0.7 to 2.01 log CFU/m3/h and coliforms with counts that ranged from 0.7 to 1.68 log CFU/m3/h. We determined the proportion of the viable microbiological population present in the air at the different sampling points of the study area; several of these sampling points presented values above those recommended by various agencies around the world. Knowledge of the biological hazards transported through the air is important to establish and reduce the risk to the health of occupants and the contamination pathways of processed and marketed fishery products that may be associated with spoilage and foodborne diseases."

food safety, food quality, air pollution, airborne biohazard, environmental monitoring INGENIERÍA Y TECNOLOGÍA CIENCIAS TECNOLÓGICAS TECNOLOGÍA DE LOS ALIMENTOS HIGIENE DE LOS ALIMENTOS HIGIENE DE LOS ALIMENTOS

EVALUACIÓN DE LA INTERACCIÓN ENTRE LAS ACTIVIDADES PRIORITARIAS DE PESCA Y CONSERVACIÓN EN EL SISTEMA SOCIOAMBIENTAL DEL GOLFO DE ULLOA. ESTUDIO DE CASO: Caretta caretta y Chelonia mydas (Linnaeus, 1758)

JEHIEL ZACIL RETANA ARELLANO (2023, [Tesis de maestría])

"El Golfo de Ulloa (GU) es un ecosistema de gran importancia socioeconómica y ecológica por su abundancia de recursos; se encuentra localizado en la costa occidental de Baja California Sur (BCS) bajo la influencia de la Corriente de California (CC). Debido a las artes de pesca empleadas en la zona, existe la interacción incidental con especies que no son el objetivo de la pesca, tal es el caso de las tortugas marinas, todas ellas sujetas a protección especial en la legislación nacional e internacional, sin embargo, a la fecha se desconoce una medición puntual de estas interacciones en el área; al respecto, en el presente trabajo se caracterizaron y dimensionaron las interacciones entre la actividad pesquera realizada con chinchorros y dos especies de tortugas marinas en la zona; para ello se consideró la información obtenida durante el censo pesquero de 2015 así como también la base de datos con información de avistamientos e interacciones de tortugas marinas con las actividades extractivas de la pesca realizada de junio 2015 a julio de 2016. Sobre la base de la información analizada, se registraron 5,661 chinchorros, de los cuales, el 95 % cumple con las medidas autorizadas en los permisos de pesca correspondientes. Por su parte, se registraron 458 avistamientos de tortugas marinas, de los cuales, el 56 % correspondió a tortuga amarilla y el resto a tortuga verde. Las interacciones de las tortugas con los sitios activos de pesca se categorizaron como: (1) viva sin enredo; (2) muerta sin enredo; (3) viva con enredo; y (4) muerta con enredo. Considerando ambas especies y estas categorías, para el periodo analizado, se observaron 85 registros, de los cuales, seis correspondieron a la categoría 1; cinco en la categoría 2; 42 en la categoría 3; y 32 en la categoría 4. Se determinó que la tortuga verde presentó mayor interacción (68.23 %) con respecto a la tortuga amarilla, con registros máximos en junio para ambas especies. Sobre estos registros, se creó un índice de interacción de artes de pesca y las tortugas marinas (IIAT), con el cual, se observó que el área de alto riesgo y daño dentro de la ZRP es muy reducida (<1 % del área total). Adicionalmente, a través de un análisis de probabilidad de Poisson se determinó que es considerablemente más probable (≈30 %) observar una tortuga viva y sin enredo que en cualesquiera de las otras tres categorías para las que se calculó una probabilidad máxima de observación de ≈12 % por cada cuadrante de 10 x 10 km..."

"The Gulf of Ulloa (GU) is an ecosystem of significant socioeconomic and ecological importance due to its abundance of resources. It is located on the western coast of Baja California Sur (BCS) and is influenced by the California Current (CC). Due to the fishing methods used in the area, there is bycatch with species that are not the target of fishing, such as sea turtles, all of which are subject to special protection under national and international legislation. However, there has been no specific measurement of these interactions in the area. In this study, the interactions between fishing activities using seine nets and two species of sea turtles in the area were characterized and quantified. The information obtained during the 2015 census and the database containing information on sea turtle sightings and interactions with fishing activities from June 2015 to July 2016 was considered. Based on the analyzed information, 5,661 seine nets were recorded, of which 95 % complied with the authorized measures in the corresponding fishing permits. Additionally, 458 sea turtle sightings were recorded, with 56 % corresponding to yellow turtles and the rest to green turtles. The interactions of turtles with active fishing sites were categorized as: (1) alive without entanglement; (2) dead without entanglement; (3) alive with entanglement; and (4) dead with entanglement. Considering both species and these categories, 85 records were observed during the analyzed period, of which six corresponded to category 1, five to category 2, 42 to category 3, and 32 to category 4. It was determined that the green turtle had a higher interaction rate (68.23 %) compared to the yellow turtle, with peak records in June for both species. Based on these records, an index of interaction between fishing gear and sea turtles (IIAT) was created. It was observed that the area of high risk and damage within the ZRP (Fishery Refuge Area) is very small (<1 % of the total area). Additionally, a Poisson probability analysis determined that it is considerably more likely (≈30 %) to observe an alive without entanglement turtle than in any of the other three categories, for which the maximum observation probability was ≈12 % for each 10 x 10 km quadrant..."

tortuga marina, captura incidental, pesca y conservación, refugio pesquero Sea turtle, bycatch, fishing and conservation, Fishery Refuge Area CIENCIAS AGROPECUARIAS Y BIOTECNOLOGÍA CIENCIAS AGRARIAS PECES Y FAUNA SILVESTRE PROTECCIÓN DE LOS PECES PROTECCIÓN DE LOS PECES

Comparison of Different Classifiers and the Majority Voting Rule for the Detection of Plum Fruits in Garden Conditions.

Razieh Pourdarbani Sajad Sabzi Mario Hernández Hernández José Luis Hernández-Hernández Ginés García_Mateos Davood Kalantari José Miguel Molina Martínez (2019, [Artículo])

Color segmentation is one of the most thoroughly studied problems in agricultural applications of remote image capture systems, since it is the key step in several different tasks, such as crop harvesting, site specific spraying, and targeted disease control under natural light. This paper studies and compares five methods to segment plum fruit images under ambient conditions at 12 different light intensities, and an ensemble method combining them. In these methods, several color features in different color spaces are first extracted for each pixel, and then the most e

ective features are selected using a hybrid approach of artificial neural networks and the cultural algorithm (ANN-CA). The features selected among the 38 defined channels were the b* channel of L*a*b*, and the color purity index, C*, from L*C*h. Next, fruit/background segmentation is performed using five classifiers: artificial neural network-imperialist competitive algorithm (ANN-ICA); hybrid artificial neural network-harmony search (ANN-HS); support vector machines (SVM); k nearest neighbors (kNN); and linear discriminant analysis (LDA). In the ensemble method, the final class for each pixel is determined using the majority voting method. The experiments showed that the correct classification rate for the majority voting method excluding LDA was 98.59%, outperforming the results of the constituent methods.

remote sensing in agriculture artificial neural network hybridization environmental conditions majority voting plum segmentation INGENIERÍA Y TECNOLOGÍA CIENCIAS TECNOLÓGICAS TECNOLOGÍA DE LOS ALIMENTOS

Percepciones campesinas indígenas acerca del cambio climático en la cuenca de Jovel, Chiapas - México

Indigenous peasant perceptions about climate change in the basin of Jovel, Chiapas

DENISE SOARES ANTONINO GARCIA GARCIA (2014, [Artículo])

Este estudio constituye una primera aproximación a los saberes y percepciones manifestados por campesinos indígenas de la cuenca de Jovel, ubicada en Los Altos de Chiapas - México, acerca de las manifestaciones y evidencias locales del cambio climático, en especial la variación en la periodicidad e intensidad de las heladas, lluvias y granizadas. Recuperamos sus posiciones acerca de los impactos que estos fenómenos producen en sus medios y condiciones de vida, a través de la aplicación de entrevistas semi-estructuradas. Los resultados encontrados apuntan que, en estos nuevos tiempos, impactados por los cambios en el régimen de lluvias, de heladas y de granizadas, se vienen poniendo en tela de juicio las perspectivas de riesgo conocidas y los indicadores locales de predictibilidad climática.

This study is a first approach to knowledge and perceptions expressed by indigenous peasants Jovel Basin, located in Los Altos de Chiapas - Mexico, about the local evidence of climate change, especially the change in the frequency and intensity of frost, rain and hail. We are interested in to recover the positions about the impacts these phenomena in their living conditions through the application of semi-structured interviews. The results suggest that in these new times, affected by changes in rainfall, frost and hail, have been put into question known risk standpoint and local indicators of climate predictability.

Cambio climático Grupos indígenas Los Altos de Chiapas CIENCIAS SOCIALES

Fabricación de nanopartículas de oro dentro de óxido de aluminio (γ-Al2O3) nanoestructurado con cavidades esféricas

Manufacturing of Gold Nanoparticles within Nanostructured Aluminum Oxide (γ-Al2O3) with Spherical Cavities

Mariela de Jesús Franco Gallegos (2023, [Tesis de maestría])

Los catalizadores basados en nanopartículas de oro han generado gran interés, gracias a su capacidad de ser selectivos en la promoción de reacciones específicas o en la producción de productos deseados, minimizando la formación de productos secundarios no deseados; sus propiedades electrónicas únicas; y su utilización bajo condiciones ambientales. Sin embargo, la desventaja principal de los catalizadores de oro es la sinterización de las nanopartículas debido a su baja temperatura de fusión, lo que provoca la pérdida de actividad catalítica y la desactivación del catalizador. Una de lassoluciones que ofrece el uso de la nanociencia y la nanotecnología es la utilización de soportes nanoestructurados que den mejor estabilidad a las nanopartículas y las protejan de la desactivación. En este trabajo se sintetizaron catalizadores basados en nanopartículas de oro soportados y encapsulados en alúmina macroporosa, por un método de impregnación húmeda asistida por ultrasonido; un método sencillo, rápido y ecológico. El desempeño catalítico de materiales sintetizados se analizó mediante espectroscopía UV-Visible in-situ en la reducción de 4-Nitrofenol a 4-Aminofenol. Así mismo, se presentan las caracterizaciones por TEM, SEM, FT-IR, espectroscopía UV-Visible, y XRD de catalizadores obtenidos. Se obtuvieron catalizadores altamente activos con alto rendimiento gracias al uso de un soporte nanoestructurado.

Catalysts -based on gold nanoparticles have recently gained interest due to their ability to selectively promote specific catalytic reactions or produce desired products, while minimizing the formation of unwanted byproducts, their unique electronic properties, and their utilization under ambient conditions. However, the main drawback of gold catalysts is the sintering of nanoparticles due to their low melting temperature, which leads to loss of catalytic activity and catalyst deactivation. One of the solutions offered by nanoscience and nanotechnology is the use of nanostructured supports that provide better stability to the nanoparticles and protect them from deactivation. In this work, gold nanoparticle-based catalysts supported and encapsulated in macroporous alumina were synthesized using a simple, fast, and eco-friendly method of ultrasound-assisted wet impregnation. The catalytic performance of synthetized materials was evaluated by in-situ UV-Visible spectroscopy in the reduction of 4-Nitrophenol to 4-Aminophenol. In addition, their characterization by TEM, SEM, FT-IR, UV Visible spectroscopy and XRD are presented. Highly active catalysts with high performance were obtained thanks to the use of a nanostructured supports.

nanopartículas de oro, alúmina macroporosa, impregnación, reducción 4-NF gold nanoparticles, macroporous alumina, impregnation, 4-NF reduction INGENIERÍA Y TECNOLOGÍA CIENCIAS TECNOLÓGICAS TECNOLOGÍA DE MATERIALES PROPIEDADES DE LOS MATERIALES PROPIEDADES DE LOS MATERIALES

Tensile behavior of 3D printed polylactic acid (PLA) based composites reinforced with natural fiber

Eliana M Agaliotis BALTAZAR DAVID AKE CONCHA ALEJANDRO MAY PAT Juan Pablo Morales Arias Celina Bernal Alex Valadez González Pedro Jesús Herrera Franco Gwenaelle Proust JUAN FRANCISCO KOH DZUL José Gonzalo Carrillo Baeza Emmanuel Alejandro Flores Johnson (2022, [Artículo])

Natural fiber-reinforced composite (NFRC) filaments for 3D printing were fabricated using polylactic acid (PLA) reinforced with 1–5 wt% henequen flour comprising particles with sizes between 90–250 μm. The flour was obtained from natural henequen fibers. NFRCs and pristine PLA specimens were printed with a 0° raster angle for tension tests. The results showed that the NFRCs’ measured density, porosity, and degree of crystallinity increased with flour content. The tensile tests showed that the NFRC Young’s modulus was lower than that of the printed pristine PLA. For 1 wt% flour content, the NFRCs’ maximum stress and strain to failure were higher than those of the printed PLA, which was attributed to the henequen fibers acting as reinforcement and delaying crack growth. However, for 2 wt% and higher flour contents, the NFRCs’ maximum stress was lower than that of the printed PLA. Microscopic characterization after testing showed an increase in voids and defects, with the increase in flour content attributed to particle agglomeration. For 1 wt% flour content, the NFRCs were also printed with raster angles of ±45° and 90° for comparison; the highest tensile properties were obtained with a 0° raster angle. Finally, adding 3 wt% content of maleic anhydride to the NFRC with 1 wt% flour content slightly increased the maximum stress. The results presented herein warrant further research to fully understand the mechanical properties of printed NFRCs made of PLA reinforced with natural henequen fibers. © 2022 by the authors.

POLYLACTIC ACID (PLA) NATURAL FIBER HENEQUEN FIBER NATURAL FIBER REINFORCED COMPOSITE (NFRC) ADDITIVE MANUFACTURING 3D PRINTING MECHANICAL PROPERTY INGENIERÍA Y TECNOLOGÍA CIENCIAS TECNOLÓGICAS TECNOLOGÍA DE MATERIALES PROPIEDADES DE LOS MATERIALES PROPIEDADES DE LOS MATERIALES