Búsqueda avanzada


Área de conocimiento




201 resultados, página 5 de 10

Impact of automation on enhancing energy quality in grid-connected photovoltaic systems

Virgilio Alfonso Murillo Rodríguez NOE VILLA VILLASEÑOR José Manuel Robles Solís OA Guirette-Barbosa (2023, [Artículo])

Rapid growth in the integration of new consumers into the electricity sector, particularly in the industrial sector, has necessitated better control of the electricity supply and of the users’ op-erating conditions to guarantee an adequate quality of service as well as the unregulated dis-turbances that have been generated in the electrical network that can cause significant failures, breakdowns and interruptions, causing considerable expenses and economic losses. This research examines the characteristics of electrical variations in equipment within a company in the industrial sector, analyzes the impact generated within the electrical system according to the need for operation in manufacturing systems, and proposes a new solution through automation of the regulation elements to maintain an optimal system quality and prevent damage and equipment failures while offering a cost-effective model. The proposed solution is evaluated through a reliable simulation in ETAP (Energy Systems Modeling, Analysis and Optimization) software, which emulates the interaction of control elements and simulates the design of electric flow equipment operation. The results demonstrate an improvement in system performance in the presence of disturbances when two automation schemes are applied as well as the exclusive operation of the capacitor bank, which improves the total system current fluctuations and improves the power factor from 85.83% to 93.42%. Such a scheme also improves the waveform in the main power system; another improvement result is when simultaneously operating the voltage and current filter together with the PV system, further improving the current fluctuations, improving the power factor from 85.83% to 94.81%, achieving better stability and improving the quality of the waveform in the main power grid.

This article belongs to Special Issue Advances and Optimization of Electric Energy System.

Power quality Capacitor bank Voltage and current filter Photovoltaic system INGENIERÍA Y TECNOLOGÍA CIENCIAS TECNOLÓGICAS OTRAS ESPECIALIDADES TECNOLÓGICAS OTRAS OTRAS

Diseño y desarrollo de dispositivo de sujeción hidráulica para el proceso de brochado

Design and development of hydraulic clamping device for broaching process

Jorge Morales Carlos Álvarez Raúl Pérez Bustamante (2023, [Artículo])

Se desarrollo un dispositivo de sujeción hidráulica para el proceso de brochado de Brackets usados en los sistemas de frenado de automóviles, que permite reducir la variación del proceso de corte al mejorar el sistema de sujeción y con ello limitar la deformación de la pieza luego de haber sido procesada. Con este concepto de dispositivo es posible mejorar las condiciones del proceso de producción, como lo son: velocidad de corte, reducción de tiempo ciclo, rendimiento de la operación, reducción de costo de scrap, y reducción de tiempo muerto por sobre ajuste de proceso y cambio de modelo. Adicional, se hizo el desarrollo de un sistema de detección de pieza presente que permite captar cuando una pieza no es colocada correctamente en el dispositivo antes de iniciar el ciclo de corte, con esto es posible detectar fallas en el proceso que representen un riesgo para la operación. Durante la etapa de diseño se realizó una simulación del proceso de maquinado en condiciones extremas y condiciones ideales para medir la deformación de la pieza y con esto obtener los parámetros adecuados de corte para la puesta en marcha del dispositivo de sujeción. Para la validación del modelo, se realizó un estudio de habilidad de proceso Cpk y Ppk (acorde a los requerimientos de cliente) para evaluar que el nuevo proceso es eficiente y se encuentra bajo control.

A hydraulic clamping device was developed for the broaching process of Brackets used in automotivebraking systems, which allows reducing the variation of the cutting process by improving the clamping system andthereby limiting the deformation of the piece after having been processed. With this concept of device, it is possibleto improve the conditions of the production process such as: cutting speed, cycle time reduction, operationperformance, scrap cost reduction, and downtime reduction due to process over-adjustment and change over.Additionally, the development of a part detection system was made that allows capturing when a part is not correctlyplaced in the device before starting the cutting cycle, with this it is possible to detect failures in the process thatrepresent a risk to the operation. During the design stage, a simulation of the machining process was carried outin extreme conditions and ideal conditions to measure the deformation of the part and with this obtain theappropriate cutting parameters for the implementation of the clamping device. For the validation of the model, aCpk and Ppk process ability study was carried out (according to customer requirements) to assess that the newprocess is efficient and is under control.

Agradecemos al Centro de Investigación y Asistencia Técnica del Estado de Querétaro, A.C. (CIATEQ) y a la empresa donde fue desarrollado el proyecto por todas las facilidades otorgadas para la realización de dicho proyecto, de igual manera, agradecer por el apoyo brindado a todas las personas involucradas directa o indirectamente en el desarrollo de este trabajo.

Agradecimientos de autoría: Jorge Alberto Morales Martínez: Conceptualización; Metodología; Software; Análisis formal; Investigación; Adquisición de fondos; Recursos; Análisis de datos; Borrador original; Administración de proyecto, Revisión y edición. Carlos Marín: Conceptualización; Ideas; Análisis de datos; Software; Análisis formal y Supervisión. Raúl Pérez Bustamante: Revisión y edición.

Dispositivo de sujeción Proceso de brochado Bracket Sistema de frenado Parámetros de corte Cpk Ppk Clamping device Broaching process Brake system Cutting parameters INGENIERÍA Y TECNOLOGÍA CIENCIAS TECNOLÓGICAS OTRAS ESPECIALIDADES TECNOLÓGICAS OTRAS OTRAS

Review of Nationally Determined Contributions (NCD) of Kenya from the perspective of food systems

Tek Sapkota (2023, [Documento de trabajo])

Agriculture is one of the fundamental pillars of the 2022–2027 Bottom-up Economic Transformation Plan of the Government of Kenya for tackling complex domestic and global challenges. Kenya's food system is crucial for climate change mitigation and adaptation. Kenya has prioritized aspects of agriculture, food, and land use as critical sectors for reducing emissions towards achieving Vision 2030's transformation to a low-carbon, climate-resilient development pathway. Kenya's updated NDC, as well as supporting mitigation and adaptation technical analysis reports and other policy documents, has identified an ambitious set of agroecological transformative measures to promote climate-smart agriculture, regenerative approaches, and nature-positive solutions. Kenya is committed to implementing and updating its National Climate Change Action Plans (NCCAPs) to present and achieve the greenhouse gas (GHG) emission reduction targets and resilience outcomes that it has identified.

CIENCIAS AGROPECUARIAS Y BIOTECNOLOGÍA CLIMATE CHANGE GREENHOUSE GAS EMISSIONS FOOD SYSTEMS LAND USE CHANGE AGRICULTURE POLICIES DATA ANALYSIS FOOD WASTES

Análisis espectral de consumo doméstico de agua potable

Felipe Arreguin ALVARO ALBERTO ALDAMA RODRIGUEZ Velitchko Tzatchkov VICTOR HUGO ALCOCER YAMANAKA HECTOR ALEXIS ESPINOSA GAYOSSO (2009, [Artículo])

Una de las variables con mayor incertidumbre en su comportamiento dentro del análisis hidráulico de las redes de agua potable es el consumo de agua proveniente de los usuarios. Recientemente, se ha demostrado que el consumo en el ámbito domiciliario tiene un carácter estocástico y se han desarrollado diferentes metodologías que intentan representar esta variable. Sin embargo, no es posible definir con exactitud dos situaciones: 1) el grado de información que se pierde al muestrear la señal con cierto intervalo de registro y la posible presencia de enmascaramiento (aliasing); y 2) la frontera (rango) en el tiempo, en el cual pueden aplicarse estos procesos de agregación y desagregación temporal. El proceso basado en el análisis de Fourier se puede aplicar como herramienta de desagregación temporal y obtener el intervalo de registro óptimo de medición en campo. A partir de la metodología, se obtuvo que el rango de aplicación del esquema está entre los 240 y 1 segundos. En otras palabras, es posible medir con intervalo de registro hasta 240 segundos y recuperar información con intervalo de registro de un segundo. El método se validó con mediciones en campo de consumo doméstico realizadas en una ciudad mexicana.

Análisis espectral Consumo doméstico de agua Modelos estocásticos INGENIERÍA Y TECNOLOGÍA

Modelos ARX para predecir la temperatura del aire de un invernadero: una metodología

ARX models for predicting greenhouse air temperature: a methodology

Irineo López-Cruz ABRAHAM ROJANO AGUILAR WALDO OJEDA BUSTAMANTE RAQUEL SALAZAR MORENO (2007, [Artículo])

Se presenta un procedimiento para obtener un modelo dinámico lineal de autoregresión con variables exógenas (ARX) para predecir el comportamiento de la temperatura del aire en el interior de un invernadero. Los ARX son modelos matemáticos dinámicos derivados de la teoría de Identificación de Sistemas. Las variables de entrada del modelo fueron temperatura del aire, radiación solar, velocidad del viento afectando el área de ventilación del invernadero y humedad relativa, cuantificadas en una estación meteorológica ubicada a 700 m de un invernadero en Chapingo, Estado de México.

A procedure is presented for obtaining a dynamic linear model of auto-regression with exogenous variables (ARX) for predicting the behaviour of the air temperature inside a greenhouse. The ARX are dynamic mathematical models derived from the theory of Systems Identification. The input variables of the model were air temperature, solar radiation, wind velocity affecting the ventilation area of the greenhouse and relative humidity, quantified in a meteorological station located 700 m from a greenhouse in Chapingo, State of México.

Invernaderos Temperatura ambiental Modelos ARX INGENIERÍA Y TECNOLOGÍA